• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1903-1910
• /
• 2001

The BI(Ball Indentation) method has a potential to assess the mechanical properties and to replace conventional fracture tests. In this study, the BI test system has been developed to evaluate material properties. Tensile tests, fracture toughness tests, hardness tests and BI tests were performed by the system using four classes of thermally aged specimens. The results of the BI tests were in good agreement with fracture characteristics from a standard fracture test method.

• Smart Structures and Systems
• /
• 제7권1호
• /
• pp.15-25
• /
• 2011

The mechanical properties obtained from mechanical tests, such as tensile, buckling, impact and fatigue tests, are largely applied to several materials and are used today for preliminary studies for the investigation of a desired element in a structure and prediction of its behavior in use. This contribution focus on two widely used different tests: tensile and fatigue tests. Small PZT (Lead Titanate Zirconate) patches are bonded on the surface of test samples for impedance-based health monitoring purposes. Together with these two tests, the electromechanical impedance technique was performed by using aluminum test samples similar to those used in the aeronautical industry. The results obtained both from tensile and fatigue tests were compared with the impedance signatures. Finally, statistical meta-models were built to investigate the possibility of determining the state of the structure from the impedance signatures.

• KSTLE International Journal
• /
• 제8권1호
• /
• pp.11-15
• /
• 2007

The mechanical face seal has been tested in Korea Aerospace Research Institute (KARl) for turbopump applications. In the turbopump under current development, the mechanical face seal is installed between fuel pump and turbine to prevent a mixture of fuel and combustion gas. Generally the mechanical face seal in turbopump is exposed to severe environment because of great rotational speed, high temperature of combustion gas and high level of pressure difference. Thus a series of tests were performed to guarantee the reliability of mechanical face seal by means of simulating the practical operating conditions. The tests were conducted up to 20,000 rpm with pressure difference of 800 kPa and temperature of 620 K In addition several carbon materials for mechanical face seal were conducted to the tests to compare the life time. During the tests, the performance against leakage was monitored and the carbon wear was also measured to estimate the life of a mechanical face seal The results show that the leakage flow rates of mechanical face seal is ignorable compared to an overall flow rate of fuel pump. The carbon material which has the finest wear resistance was found during the tests. Lastly no critical failure of mechanical face seal was found during the tests and the reliability of mechanical face seal for turbopump was successfully proved.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.487-495
• /
• 2005

Mechanical properties of in-service facilities are required to evaluate the integrity of power plants and chemical plants. Non-destructive technique can be used to evaluate the mechanical properties. To investigate the mechanical properties using ultrasonic technique, the four classes of thermally aged specimens were prepared using an artificially accelerated aging method. Ultrasonic tests, tensile tests, fracture toughness tests, and hardness tests were performed for the specimens. Then the mechanical properties were compared with ultrasonic parameters such as attenuation and non-linear parameter. From the investigation, we confirm that the ultrasonic parameter can be used to evaluate the mechanical properties.

• 한국추진공학회지
• /
• 제27권1호
• /
• pp.58-67
• /
• 2023

본 논문에서는 메탄엔진 단일분사기급 연소기의 추력제어를 위해 수행된 드라이런 테스트, 수류시험, 그리고 연소시험 결과를 다루었다. 메탄엔진 연소시험설비의 산화제 및 연료 공급 라인에 유량제어 밸브를 설치한 후, 다수의 드라이런 테스트를 수행하여 밸브가 설정된 스트로크에 빠르고 안정적으로 도달할 수 있도록 하였다. 다음 액체질소와 기체질소를 사용한 수류시험을 진행하여 밸브 제어에 따른 모사 추진제의 안정적인 공급을 확인하였다. 최종적으로 액체산소와 기체메탄을 사용하여 정격 추력 대비 50%~10%의 고정 추력제어 연소시험과 연속 추력제어 연소시험을 성공적으로 수행하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.179-180
• /
• 2008

Optical Mechanical splice is essential component to construct for FTTH. Optical Mechanical splice is executed many countries' FTTH including Korea. In this paper, we have designed Optical Mechanical splice using UV and completed a series of mechanical and environmental tests on the optical Mechanical splice. And the results of tests and Bellcore-requirements for optical Mechanical splice will be presented. Accordingly, evaluation method of optical Mechanical splice has gained power to improve the quality and stability of it.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.243-252
• /
• 1999

The damage caused in the processes and distributions after harvesting the fruits and vegetables is attributed to the mechanical factors such as compressive and impact forces. Compression tests of biological materials provide an objective method for determining the apparent modulus of elasticity and mechanical properties which are significant in quality evaluation and control, and them maximum allowable compressive forces for minimizing mechanical damage. This study was performed to determine the mechanical properties of apple and pear, and to investigate effect of specimen shapes on the mechanical properties of them. A computer program was developed for measuring the mechanical properties and analyzing the data obtained from the measurement. Compression tests on the sample were performed with then replications at each treatment and at 25 mm/min loading rate. Mechanical properties of the apple was generally shown the higher value than those of the pear, and it was though that data obtained form the cylindrical specimen removed from the sample was more reliable than from the specimen cut in half.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.346-353
• /
• 2011

In this study, the structural performance tests, i.e., static tests and dynamic tests of the composite wind turbine blade, were carried out by using the embedded fiber Bragg grating (FBG) sensors. The composite wind turbine blade used in the test is the 1/23 scale of the 750 kW composite blade. In static tests, the deflections along the blade were evaluated. Evaluations were carried out with simple beam theory and quadratic fitting method by using the embedded FBG sensors to predict the structural behavior with respect to the load. The deflections were compared to those obtained from the laser displacement sensor and electric strain gauges. They showed good agreement. Modal tests were performed to investigate the dynamic characteristics using the embedded FBG sensors. The natural frequencies obtained from the FBG sensors corresponding to the nine mode shapes of the blade were compared to those from the laser Doppler vibrometer. They were found to be consistent with each other. Therefore, it is concluded that the embedded FBG sensors have a great capability for measuring the structural performances of the composite wind turbine blade when structural performance tests are carried out.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권4호
• /
• pp.345-350
• /
• 2010

The repetitive vibrating action of an aerodynamic load causes an external fuel tank's horizontal fin to experience a shorter life cycle than its originally predicted one. Store separation analysis is needed to redesign the fin of an external fuel tank. In this research, free-drop tests were conducted using 15% scaled models in a subsonic wind tunnel in order to analyze the store separation characteristics of an external fuel tank. The store separation trajectory based on grid tests was also obtained to verify the results of the free-drop tests. The results acquired from the free-drop tests correlated well with the grid tests in regards to the trajectories and behavior of the stores separated from the aircraft. This agreement was especially noted in the early stages of the store separation.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.1-12
• /
• 1995

Isothermal and thermal-mechanical fatigue characteristics of 12Cr heat resisting steel used for high temperature applications were investigated including hold time effects. Isothermal low cycle fatigue test at $600^{\circ}C$ and in-phase, out-of-phase thermal-mechanical fatigue test at 350 to $600^{\circ}C$ were conducted using smooth cylindrical hollow specimen under strain-control with total strain ranges from 0.006 to 0.015. Regardless of thermal-mechanical and isothermal fatigue tests, cyclic softening behavior was observed and much more pronounced in the thermal-mechanical fatigue tests with hold times due to the stress relaxation during the hold time. The phase difference between temperature and strain in thermal-mechanical fatigue tests resulted in significantly shorter fatigue life for out-of-phase compared to in-phase. The differences in fatigue lives were dependent upon the magnitudes of plastic strain ranges and mean stresses. During the hold time in the strain-controlled fatigue tests, the increase in the plastic strain range and the stress relaxation were observed. It appeared that the increase in plastic strain range per cycle and the introduction of creep damage made important contributions to the reduction of thermal-mechanical fatigue life with hold time, and the life reduction tendency was more remarkable in the in-phase than in the out-of-phase thermal-mechanical fatigue. Isothermal fatigue tests performed under the combination of fast and slow strain rates at $600^{\circ}C$ showed that the fatigue life decreased as the strain rate and frequency decreased,especially for the low strain ranges.