• 대한기계학회논문집A
• /
• 제39권1호
• /
• pp.1-9
• /
• 2015

이 논문은 SEM(Scanning Electron Microsopy) 경통부에서 전자빔의 집속특성을 최적화하기 위한 방법을 다루고 있다. SEM 에서 물체 표면을 확대하기 위해서는 경통부를 지나는 전자빔을 효과적으로 집속하여 표면에 충돌하는 프로브 직경을 줄이는 것이 중요하다. 이 전자빔의 집속정도를 나타내는 지표가 반배율이다. 본 연구는 전자빔의 집속특성을 효과적으로 구현하기 위해 그에 영향을 끼치는 경통부의 설계 인자들을 렌즈 해석과 광선 추적을 통해 알아본다. 이 결과를 근거로 민감도 분석을 수행하여 설계 인자들이 빔의 집속에 끼치는 영향의 정도를 정량적으로 비교해 볼 수 있다. 이러한 전자빔의 특성에 따른 설계 인자의 분석은 경통부 설계에 있어 중요한 기초 정보로 활용될 수 있다.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.808-815
• /
• 2007

The optical performance of the mirror fur satellite camera is highly dependent on the adhesive properties between the mirror and its support. Therefore, in order to design a mirror with high optical performance, the mechanical properties of adhesives should be well defined. In this research, the mechanical properties of three kinds of space adhesives are studied. In case of the materials which show nearly incompressible behavior such as space adhesives, it is important to measure shear modulus which governs deviatoric stress components. Also the experiment should be performed in circumstances similar to real manufacturing process of mirror, because extra factors such as size effects, the adhesion effects of primer and reactions between adhesive and primer affect the properties of adhesive regions. In this research shear moduli of the adhesives are determined by using a single lap adhesively bonded joint. For the shear tests, several temperatures have been selected from $-20^{\circ}C$ to $55^{\circ}C$ which is operating temperature range of the adhesive. In the case of linear behavior materials, shear moduli are calculated through a linear curve fitting. Shear stress-strain relation is obtained by using an exponential curve fitting for material which shows non-linear behavior. The shear modulus of each adhesive is expressed as a function of temperature. Characteristics and adaptability of the adhesives are discussed regarding their temperature sensitivity.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1773-1785
• /
• 1997

The cooling stage is the very critical and most time consuming stage of the injection molding process, thus it cleary affects both the productivity and the part quality. Even through there are several commercialized package programs available in the injection molding industry to analyze the cooling performance of the injection molding coling stage, optimization of the cooling system has npt yet been accomplished in the literature due to the difficulty in the sensitivity analysis. However, it would be greatly desirable for the mold cooling system designers to have a computer aided design system for the cooling stage. With this in mind, the present study has successfully developed an interated computer aided design system for the injection molding cooling system. The CAD system utilizes the sensitivity analysis via a Boundary Element Method, which we recently developed, and the well-known CONMIN alforuthm as an optimization technique to minimize a weighted combination (objective function) of the temperature non-uniformity over the part surface and the cooling time related to the productivity with side constranits for the design reality. In the proposed objective function , the weighting parameter between the temperature non-uniiformity abd the cooling time can be adjusted according to user's interest. In this cooling system optimization, various design variable are considered as follows : (i) (design variables related to processing conditions) inlet coolant bulk temperature and volumetric flow rate of each cooling channel, and (ii) (design variables related to mold cooling system design) radius and location of each cooling channel. For this optimum design problem, three different radius and location of each cooling channel. For this optimum design problem, three different strategies are suffested based upon the nature of design variables. Three sample problems were successfully solved to demonstrated the efficiency and the usefulness of the CAD system.

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.739-744
• /
• 2012

유전 알고리즘은 전역 최적해(global optimum)를 찾는 좋은 방법 중에 하나로 변화율(gradient)을 기반으로 하는 방법들과 달리 민감도 해석이 요구되지 않으므로 민감도 해석이 어려운 초고주파 영역에서의 설계 문제에 적합하다. 본 연구에서는 나노개구 격자의 위상화적화를 유전 알고리즘과 ON/OFF 방법에 기반하여 수행하였다. 연구의 목적을 나노개구 격자의 측정영역에서 투과효율을 최대화 하는 것으로 하고, 모든 해석 및 최적화 과정은 COMSOL 프로그램과 Matlab 프로그램의 연동에 의하여 수행되었다. 최종 제시된 설계는 기본 모델 대비 약 21%의 성능 향상을 나타내었다.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.413-418
• /
• 2013

본 연구에서는 진동모터의 진동패턴을 설계하고 평가하는 시스템을 제안하여 촉감을 통해 더욱 풍부한 정보를 습득할 수 있는 방법을 제안하였다. 시스템은 진동패턴을 설계하고 평가할 수 있는 컴퓨터 프로그램과 진동패턴을 촉감으로 확인할 수 있는 진동촉감 제시장치로 구성된다. 프로그램에서는 설계자가 진동패턴을 직관적으로 설계할 수 있는 시각적 설계도구와 재생기능을 제공하며 설계된 진동패턴의 재생을 통해 평가자가 진동패턴이 어떠한 기능을 나타내고 있는지 선택할 수 있는 평가기능을 제공한다. 진동촉감제시장치는 프로그램으로부터 전송된 진동패턴 정보를 진동모터로 구동시켜 설계결과를 실제 촉감으로 확인 할 수 있는 기능을 제공한다. 개발한 시스템을 통해 스마트폰과 자동차 오디오에서 대표적으로 사용되는 기능들에 대한 진동패턴 설계 및 평가를 진행하여 평가정보가 설계에 피드백 되는 방법과 높은 평가채택률을 획득한 진동패턴들을 분석하여 진동패턴 설계 지침을 제시하였다.

• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1361-1369
• /
• 2013

본 연구에서는 다공홀 인젝터 내부 유동에 대한 CFD 시뮬레이션 해석(ANSYS 13.0 CFX)을 직접 수행하였다. 이러한 결과를 바탕으로 인젝터 노즐 설계변수가 캐비테이션에 미치는 영향을 파악하기 위해 실험계획법이 적용되었다. 각 설계변수의 설계민감도 및 신호 대 잡음비 분석을 위해 캐비테이션 유동에 영향을 미친다고 판단되는 설계변수는 노즐 홀 직경, 노즐 홀 길이, 노즐 홀 각도 및 노즐 홀의 K-factor로 지정하였다. 또한 16 개 실험점으로 각 변수의 영향을 분석하였다. 본 연구에서 노즐 내부유동을 파악하기 위하여 수치해석 프로그램과 신호 대 잡음비 분석이 본 논문에 적용되었고 그 결과, K-factor의 변화가 노즐 홀 길이와 노즐 홀 각도의 변화보다 인젝터 내부 캐비테이션 생성에 미치는 영향이 더 크다는 것을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.491-491
• /
• 2011

Transparent and flexible electronic devices that are light-weight, unbreakable, low power consumption, optically transparent, and mechanical flexible possibly have great potential in new applications of digital gadgets. Potential applications include transparent displays, heads-up display, sensor, and artificial skin. Recent reports on transparent and flexible field-effect transistors (tf-FETs) have focused on improving mechanical properties, optical transmittance, and performances. Most of tf-FET devices were fabricated with transparent oxide semiconductors which mechanical flexibility is limited. And, there have been no reports of transparent and flexible all-organic tf-FETs fabricated with organic semiconductor channel, gate dielectric, gate electrode, source/drain electrode, and encapsulation for sensor applications. We present the first demonstration of transparent, flexible all-organic sensor based on multifunctional organic FETs with organic semiconductor channel, gate dielectric, and electrodes having a capability of sensing infrared (IR) radiation and mechanical strain. The key component of our device design is to integrate the poly(vinylidene fluoride-triflouroethylene) (P(VDF-TrFE) co-polymer directly into transparent and flexible OFETs as a multi-functional dielectric layer, which has both piezoelectric and pyroelectric properties. The P(VDF-TrFE) co-polumer gate dielectric has a high sensitivity to the wavelength regime over 800 nm. In particular, wavelength variations of P(VDF-TrFE) molecules coincide with wavelength range of IR radiation from human body (7000 nm ~14000 nm) so that the devices are highly sensitive with IR radiation of human body. Devices were examined by measuring IR light response at different powers. After that, we continued to measure IR response under various bending radius. AC (alternating current) gate biasing method was used to separate the response of direct pyroelectric gate dielectric and other electrical parameters such as mobility, capacitance, and contact resistance. Experiment results demonstrate that the tf-OTFT with high sensitivity to IR radiation can be applied for IR sensors.

• 한국태양에너지학회 논문집
• /
• 제31권5호
• /
• pp.1-8
• /
• 2011

In this study, we performed a sensitivity analysis to see how the true north error of a wind direction vane installed to a meteorological mast affects predictions of the annual-average wind speed and the annual energy production. For this study, two meteorological masts were installed with a distance of about 4km on the ridge in complex terrain and the wind speed and direction were measured for one year. Cross predictions of the wind speed and the AEP of a virtual wind turbine for two sites in complex terrain were performed by changing the wind direction from $-45^{\circ}$ to $45^{\circ}$with an interval of $5^{\circ}$. A commercial wind resource prediction program, WindPRO, was used for the study. It was found that the prediction errors in the AEP caused by the wind direction errors occurred up to more than 20% depending on the orography and the main wind direction at that site.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.529-538
• /
• 2010

This paper presents a reliability-based topology optimization (RBTO) based on bidirectional evolutionary structural optimization (BESO). In design of a structure, uncertain conditions such as material property, operational load and dimensional variation should be considered. Deterministic topology optimization (DTO) is performed without considering the uncertainties related to the design variables. However, the RBTO can consider the uncertainty variables because it can deal with the probabilistic constraints. The reliability index approach (RIA) and the performance measure approach (PMA) are adopted to evaluate the probabilistic constraints in this study. In order to apply the BESO to the RBTO, sensitivity number for each element is defined as the change in the reliability index of the structure due to removal of each element. Smoothing scheme is also used to eliminate checkerboard patterns in topology optimization. The limit state indicates the margin of safety between the resistance (constraints) and the load of structures. The limit State function expresses to evaluate reliability index from finite element analysis. Numerical examples are presented to compare each optimal topology obtained from RBTO and DTO each other. It is verified that the RBTO based on BESO can be effectively performed from the results.

• 센서학회지
• /
• 제32권1호
• /
• pp.44-50
• /
• 2023

In this study, a polydimethylsiloxane (PDMS)-based drag force-type flowmeter was fabricated using a graphite-carbon nanotube (CNT) composite as a piezoresistive material and evaluated. The device was in the form of a cantilever, which was composed of the soft material, PDMS, and fabricated using a mold manufactured by a three-dimensional printer. The cost-effective graphite was mixed with CNTs to serve as a piezoresistive material. The optimal mixing ratio was investigated, and the piezoresistive material formed using a graphite:PDMS:CNT ratio of 1.5:1:0.01 was adopted, which showed a stable output and a high sensitivity. Various forward and backward air flows in the range of 0-10 m/s were measured using the fabricated flowmeter, and both tensile and compression characteristics were evaluated. The measured results showed a stable output, with the resistance change gradually increasing with the air flow rate. Repeatability characteristics were also tested at a repeated air flow of 10 m/s, and the flowmeter responded to the applied air flow well. Consequently, the fabricated device has a high sensitivity and can be used as a flowmeter.