• 제목/요약/키워드: Mechanical Structure

검색결과 8,141건 처리시간 0.039초

기관배기 밸브용 강 ( SCr4-21-4N , SUH3-21-4N ) 의 마찰압접과 열처리에 관한 실험적 연구 (An Experimental Study on Friction Welding and Heat Treatment of Engine Exhaust Valve Steels ( SCr4-21-4 N , SUH3-21-4-N)

  • 오세규
    • 수산해양기술연구
    • /
    • 제14권2호
    • /
    • pp.79-87
    • /
    • 1978
  • 기관밸브용접 SCr4-21-4N 및 SUH3-21-4N을 연구선정된 최적마찰압접조건 하에서 마찰압접을 하고 이때 생기는 압접부의 잔류응력 및 경도의 peak 등 압접결함의 제거 및 압접성능개선을 위한 열처리에 관하여 실험연구한 결과 다음과 같은 결론을 얻었다. (1) 배기 valve용강 SCr4-21-4N 및 SUH3-21-4N의 마찰압접을 위한 최적조건으로서 회전수 3,000rpm, 마찰가열압 p 하(1)=8 kg/mm 상(2), upset 압 p 하(2)=20 kg/mm 상(2), 압접가열시간 t 하(1)=3초, upset 시간 2.5초를 선정한 것이 매우 타당함이 실험적으로 입증되었다. (2) 이종재질 SUH3-SUH31, SCr4-SUH31, SCr4-SUH3, SUH3-CRK22, SCr4-21-4N 및 SUH3-21-4N의 마찰압접에 관한 저자의 종래 연구와 본연구 결과는 압접부의 압접 특성이 서로 매우 일치하였다. (3) SCr4-21-4N 및 SUH3-21-4N의 마찰압접부의 잔류응력 및 전도의 peak를 제거하기 위한 최적열처리조건은 $600^{\circ}C$$\times$30min.$\times$room air cooling의 normalizing임이 확인되었다. (4) 이때 열처리 후에는, 열처리전의 인장강도의 약 20%가 감소했으나, 파단 위치는 열영향부로부터 모재 SCr4 및 SUH3 측으로 이동하였다. (5) 상기 최적조건 하에서 마찰압접되고 열처리된 압접부의 현미경 조직검사 결과, 압접부가 매우 좁고 압접결함이 없으며, 치밀하고 조밀한 조직의 우수한 압접이었음이 확인되었다. (6) 상기 최적조건은, 기관 valve 생산을 위한 타이종재질의 마찰압접조건으로도 응용될 수 있을 것이다.

  • PDF

측두하악장애 환자에서 하악과두의 퇴행성 변화의 발생 양상에 대한 연구 (The Occurrence of Degenerative Change in the Mandibular Condyles of Korean Patients with Temporomandibular Disorders)

  • 조정환;박민우;김영구;이정윤
    • Journal of Oral Medicine and Pain
    • /
    • 제36권1호
    • /
    • pp.53-63
    • /
    • 2011
  • 골관절염은 관절의 연조직, 관절연골 및 연골하 골조직의 합성과 분해 사이의 불균형으로 인한 조직의 변성을 야기하는 관절의 질환이다. 일반적으로 골관절염은 연령에 따라 급격히 증가하고, 여성에서 호발하는 특징을 보이는 것으로 알려져 있지만, 측두하악관절에서의 골관절염의 유병률에 관한 연구는 측두하악관절의 독특한 특성에도 불구하고 정확한 연구가 부족한 실정이다. 본 연구에서는 측두하악관절에서 발생하는 골관절염의 실제 성별, 연령별 분포 및 임상적 특징을 알아봄으로 써 병인의 이해에 필요한 기초 자료를 제시하고자 한다. 본 연구에서는 2007년 1월부터 12월까지 1년 동안 서울대학교 치과병원에 측두하악장애를 주소로 처음 내원한 4327명의 환자를 대상으로 하였다. 측두하악장애의 진단을 위해 촬영된 orthopantomogram, TMJ tomogram, transcranial radiograph를 이용하여 측두하악관절의 퇴행성 변화를 조사하였으며, 성별, 연령, 골변화 양상에 따른 분포를 분석하여 다음과 같은 결과를 얻었다. 1. 측두하악장애 증상을 호소하는 환자 4327명 중 883명 (20.4%)에서 퇴행성 변화가 관찰되었고, 남성에서는 177명 (12.6%), 여성에서는 706명 (24.1%)에서 관찰되어 여자에서 호발하는 것으로 관찰되었으며, 이러한 여성 우위의 호발 양상은 모든 연령대에서 관찰되었다. 2. 측두하악장애 증상을 호소하는 환자 중 하악과두의 퇴행성 변화를 보이는 환자의 비율은 연령대가 증가함에 따라 완만하게 증가하였고, 연령별로 구분하여 볼 때에는 여성에서는 연령대별 발생비율의 증가가 통계적으로 유의하였으나 (P < 0.001), 남성에서는 통계적으로 유의하지 않았다. 3. 퇴행성 변화 환자군에서 나타나는 퇴행성 변화의 유형 중, 발생빈도가 가장 높은 형태는 sclerosis였고 (84.6%), 발생 환자 의 평균연령이 가장 높은 형태는 osteophyte였다 (44.8세). 4. 퇴행성 변화의 좌, 우 발생 분포를 보면 좌측에서 호발하였고, 남성 내에서는 좌측, 여성 내에서는 양측에서 모두 발생한 비율이 가장 높았으나, 전체적인 좌, 우 발생 양상은 남녀간에 통계적으로 유의한 차이를 보이지 않았다. 결론적으로, 측두하악장애 환자에서 나타나는 측두하악관절의 퇴행성 변화는 여성에서 호발하고 연령이 증가함에 따라 완만한 증가를 보이며 젊은 연령층의 환자에서도 높은 비율로 발생함을 알 수 있다. 측두하악장애가 젊은 연령층에서 호발한다는 이전의 보고들을 토대로 볼 때 측두하악관절의 퇴행성 변화는 타관절에서 발생하는 퇴행성 변화와는 다른 역학적 특징을 가지고 있을 가능성이 크며, 이러한 사실은 측두하악관절에서 발생하는 퇴행성 변화의 병인을 이해하고 그 치료법을 개발하는데 있어서 매우 중요한 의미를 가진다.

우리나라 남부지역(南部地域) 화강암질(花崗巖質) 삼림토양(森林土壤)의 SEM과 TEM에 의한 관찰(觀察) (Submicroscopy of Forest Soils (kandiustults) Derived from Granite in Southern Part of Korea)

  • 조희두;안기완
    • 한국산림과학회지
    • /
    • 제90권5호
    • /
    • pp.608-618
    • /
    • 2001
  • SEM이나 TEM에 의하여 토양의 풍화과정을 구명하는 것은 토양의 성질을 파악하는데 아주 중요하다. 본 연구에서 우리나라 남부지역 화강암질 삼림토양의 물리 화학적 성질과 초현미경적 특성을 파악하여 토양 형성 과정에서 여러 가지 정보를 제공해주고 있다. O층과 E층에서 삼림 소동물의 적극적인 활동을 증명 해주고 있는 동물 배설물인 fecal pellets의 외부형태를 상세히 관찰 할 수 있는데, 외부형태는 spherical, ellipsoidal, cylindrical, platy, threadlike의 5가지로 알려져 있는데(Mermut, 1985) 본 연구에서 doughnutlike 형태가 발견되었다. 토양 미세립자(微細粒子)는 투수(透水)에 의하여 상부 A층에서 용탈(溶脫)되어 B층이나 BC층에서 집적(集積)하는데 B층이나 BC층에서 Ped 표면에 집적(集積)되어 있는 cutan과 kaolinite가 퇴적(堆積)되어 있는 것을 관찰할 수 있고 cutan은 312cm나 되는 깊은 곳에서도 형성되고 있으며 이 cutan의 표면은 높은 배솔(倍率)로 관찰하여보니 fine silt, coarse clay, fine clay로 구성되고 있으며 rod-like halloysite를 관찰할 수 있다. Fine clay에서 TEM에 의해서 halloysite를 관찰할 수 있는데 halloysite는 장석(長石)에서 풍화 생성되는 것으로 널리 알려져 있으며 화강암에서 유래된 ferruginous chlorites에서도 생성되는 사실이 Cho와 Mermut(1992a, b)에 의하여 보고된바 있지만 Jackson(1962)에 의하여 kaolin의 풍화과정이 추론되고 Wada와 Kakuto(1983a, b)에 의하여 우리나라 Alfisols와 Ultisols에서 intergradient vermiculite-kaolin mineral의 생성과정이 추론된 바 있다. 따라서 본 연구에서도 많은 양의 halloysite가 ferruginous chlorite에서 풍화 생성됨을 확인할 수 있었다. 일차광물(一次鑛物)인 chlorites의 구성원소(構成元素)인 Fe가 풍화 과정에서 Iron oxides가 형성되어 토양을 붉은색을 띄게 하여 주는데 Bt층에서 ferruginous chlorites가 exfoliation이 생기며 1층(層)의 가장자리에 Iron oxides가 결품집합(結品集合)된 형태로 관찰(SEM)되었으며 fine clay에서 Hematite와 Goethite을 관찰(TEM)할 수 있다.

  • PDF

다공성 $ZrTiO_4$ 재료의 제조 및 특성 (Fabrication and characteristics of porous ceramics from $ZrTiO_4$ based ceramic material)

  • 허근;명성재;이용현;전명표;조정호;김병익;심광보
    • 한국결정성장학회지
    • /
    • 제18권1호
    • /
    • pp.5-9
    • /
    • 2008
  • 코디어라이트는 낮은 열팽창계수를 가지나, 디젤 배기가스 담체로써 사용하기에는 기계적 강도가 낮고, 황에 대한 내산성이 취약한 문제를 가지고 있다. 본 연구에서는 $SiO_2,\;Al_2O_3$, MoOx, $Cr_2O_3$$Nb_2O_5$가 첨가된 $ZrTiO_4$의 물성을 XRD, SEM, UTM 및 열팽창계수 측정 장치를 사용하여 측정하고 분석하였다. $ZrTiO_4$$TiO_2$$ZrO_2$를 출발원료로 볼빌에서 혼합한 후 $1240^{\circ}C$ 이상의 온도에서 3시간 하소함으로써 monoclinic 구조로 합성되었다. 꺽임강도 및 열팽창계수 측정용 시편은 $ZrTiO_4$와 첨가제를 혼합 성형하고, $1300^{\circ}C$에서 3 시간 소성함으로써 얻어졌다. 소결된 시편의 기공율은 첨가제의 함량이 5%로 증가함에 따라 첨가제의 종류에 관계없이 감소하였으나, 첨가제의 함량이 10% 로 증가하면 기공율은 포화되었다. 꺾임강도는 $Al_2O_3$를 5, 10 wt% 첨가 시 큰 폭으로 증가하였으나, 나머지 첨가제에 대해서는 꺾임강도가 감소하였다. $ZrTiO_4$의 열팽창계수 $(1000^{\circ}C)$$Nb_2O_5$를 제외하고는 첨가제가 증가할수록 계속적으로 감소하였으며, 특히, $SiO_2$가 첨가된 경우 가장 낮은 열팽창계수를 나타내었다.

우유 첨가에 따른 증편의 품질 선택 (Quality Characteristics of Jeung-Pyun Prepared with Milk)

  • 장정선;박영선
    • 동아시아식생활학회지
    • /
    • 제18권3호
    • /
    • pp.311-321
    • /
    • 2008
  • 본 연구는 증편의 활용도를 높이고 영양적인 측면에서 증편의 부족한 단백질을 보완하기 위하여 우유를 0, 5, 10, 15, 20 g 첨가하여 제조한 반죽 및 증편의 발효 과정에 따른 기 계적 특성, 관능적 특성을 검사하고 SEM을 사용하여 증편의 내부 구조를 관찰하였으며, 그 결과는 다음과 같다. 1. 색도 측정에 있어서 L값은 우유의 첨가량이 많아질수록 증가하여 20 g 첨가군이 65.43으로 가장 높게 나타났으며 유의적인 차이는 없었다. a값 역시 우유 20 g 첨가군이 가장 높게 나타났으며, b값은 우유 첨가군이 대조군에 비해 유의 적으로 높은 경향을 나타내었다(p<.001). 2. 우유 10, 15 g을 첨가군에 있어서 발효 8시간의 점도는 각각 5,726.67 cp, 6,600 cp로 첨가량이 많아질수록 높아지는 경향을 나타내었으며, 우유 첨가군이 대조군에 비해 유의적 으로 높았다(p<.00 1). 3. 경도는 첨가군에 있어서는 첩가량이 증가할수록 높게 나타났으며, 탄력성과 응집성은 대조군과 첨가군간의 유의 차가 없었으며, 검성과 부서짐성은 우유 5, 10 g 첨가군이 낮게 나타났다. 4. 우유를 첨가한 증편의 부피범위는 $236.67{\sim}255.00\;mL$이며, 대조군이 208.33 mL로 가장 낮았으며, 우유 첨가 10 g (255.00 mL)을 기점으로 감소하였다. 비체적의 경우도 부피와 비슷한 경향이었으며, 팽화도는 우유 $5{\sim}20\;g(128.28{\sim}133.12%)$ 첨가군이 대조군(122.65%)에 비해 높았으나 유의적인 차이는 없었다. 5. 관능검사 결과, 증편의 기공은 우유의 첨가량이 많아질 수록 크기가 작아지고 불균일한 것으로 평가되었으며, 20 g 첨가군이 가장 낮은 수치이었다. 증편 특유의 탁주향은 우유 첨가량이 많아칠수록 유의적으로 감소하여(p<.001) 20 g 첨 가군에서 가장 낮게 나타났다. 신맛은 첨가량이 많아질수록 높아져 15, 20 g 첨가군에서 높은 경향이었다. 부드러움에 있어서는 우유 무첨가군 시료가 첨가군 시료보다 다소 부드 럽다고 평가되었으며, 첨가군에서는 15, 20 g 첨가한 것이 동일하게 부드렵다고 응답하였다. 전체적인 바람직성에 있어서는 대조군, 우유 5, 10 g을 첨가한 군이 선호도가 일치한 것으로 나타났다. 6. 전체적인 기호도에 있어서 색이 흴수록, 단맛이 강하고 쫄깃할수록 더 선호했으며 신맛이 강할수록 전체적인 기호도는 좋지 않았다. 또한, 부드러우며 찰기가 클수록 전체적인 기호도가 높았다. 관능 특성치들간에는 졸깃할수록 탄력성이 크 고 촉촉하며, 부드러울수록 씹힘성이 좋은 것으로 측정되었다. 7. 전반적으로 우유 첨가량이 적은 것이 기공의 크기가 크고 첨가량이 많아질수록 기공의 크기가 작아지는 경향을 볼 수 있었다. 5 g 첨가군은 대조군에 비해서 기공이 커졌으며, 15, 20 g 첨가한 군은 대조군에 비해서 기공이 작아지고 불균일하였다. 전체적으로 우유 10 g 첨가 증편의 기공 크기와 균일한 정도가 잘 발달되어 있음을 관찰할 수 있었다. 이상의 결과를 종합하여 볼 때 기계적 특성과 내부 구조를 관찰함에 있어서 우유 10 g을 첨가한 증편의 경우가 경도, 기공의 균일함 등이 가장 바람직하게 평가되었다. 관능검사에서는 대조군과 우유 5, 10 g 첨가 증편의 기호도가 일치하였으나 건강에 대한 관심이 높아지고 있는 시점에서 볼 때 우유 10 g을 첨가하는 것이 바람직한 것으로 판단되었다. 또한, 우유의 첨가로 인하여 단백질 보완 효과도 있는 것으로 확인 되어 기능성 증편 제조의 활성화에 기여할 것으로 생각된다.

  • PDF

Recent research activities on hybrid rocket in Japan

  • Harunori, Nagata
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.1-2
    • /
    • 2011
  • Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

  • PDF

역할 창조를 위한 '몸틀(body schema)' 형성 연구 (A Study on Forming 'Body Schema' for Role Creating)

  • 송효숙
    • 한국연극학
    • /
    • 제52호
    • /
    • pp.319-357
    • /
    • 2014
  • Formation of 'body schema' is the start for actor to create role and becomes the root and the foundation of existing as a role on the stage. For this, an actor needs to form 'scheme of role' with escaping from own 'body schema.' 'Schema of role' is formed by acquiring through synthesizing daily basic actions, namely, walking, standing, sitting, hand stretching, bending, and touching. The body schema, which was made with simple and usual actions, has fundamental significance in a sense of becoming the body in which the past traces in a role are habituated while energy as a role flows. As for the process of forming body schema, an actor first needs to obtain the visualized materials like photo, magazine, picture and image available for seeing a role specifically and clearly based on what analyzed a character. An actor needs to have three-dimensional image available for always recalling it in the head during acting. To do this, image data available for fundamentally capturing routine actions along with body structure are still more useful. Next, the body schema is formed by interaction with environment. Thus, there is a need of passing through the two-time process of forming body schema. Firstly, the body schema is made on routine actions in a role as physical condition of a role in actor's own everyday life. Secondly, the body schema is made on routine actions available for moving efficiently and economically in line with the environment of performance. A theatrical stage is the temporal space of rhythm and rule different from routine space. What forms body schema immediately in the second phase without body schema in the first phase ultimately becomes what exists as actor's own body, not the body of a role. The body schema, which was formed as the second process, is what truly has identity as a role in the ontological aspect, comes to experience the oppositional force in muscle, a qualitative change in energy, and emotional agitation in the physical aspect, and experiences perception, thinking, volition, and even consciousness with the entire body in the cognitive dimension. Thus, the formation of body schema can be known to be just a method of changing even spiritual and emotional layer. Body schema cannot be made if there is no process of embodiment and habit. Embodiment and habit are not simply the repeated, empty and mechanical action in the body. But, habit itself has very important meanings for forming body schema for role creating. First, habit allows the body itself to learn and understand a meaning. Second, habit relies upon environment, thereby allowing an actor of making the habituated body schema to recognize environment. Third, habit makes the mind. The habituated body schema is just the mind and the ego of a person who possesses the body schema. Fourth, habit comes to experience the expansion in energy and the expansion in existence. It may be experienced through interrelation among actor's body, tool, and environment. Fifth, habit makes identity of the body. Hence, this just becomes what secures identity of a role. These implications of habit are the formation of body schema, which is maintained with the body of being remembered firmly through being closely connected with the process of neural adaptation. Finally, it sought for possibility of practice as one method of forming body schema for role creating through Deleuze's '-becoming' theory. As 'actual animal-becoming' is real '-becoming' of forming structural transformation in the physical dimension, it meets with what the formation of body schema pursues actuality and reality. This was explained with a concept as saying of 'all '-becoming' molecular' by Deleuze/Guattari. 'Animal of having imitated animal's characteristic- becoming' is formed by which the body schema relies upon environment. In this way, relationship among the body, tool and environment has influence even upon a change in consciousness, thinking, and emotion, thereby being able to be useful for forming body schema in a sense of possibly experiencing ultimately expansion in role, namely, expansion in existence.

요추부 협착에서의 피질골 궤도 나사못 고정의 초기 실패 사례에 대한 고찰 (Early Failure of Cortical-Bone Screw Fixation in the Lumbar Spinal Stenosis)

  • 권지원;김진규;하중원;문성환;이환모;박융
    • 대한정형외과학회지
    • /
    • 제55권5호
    • /
    • pp.405-410
    • /
    • 2020
  • 목적: 퇴행성 요추부 척추 질환에 대한 수술적 치료로 척추 경 나사못(pedicle screw) 삽입술이 전통적으로 사용되어왔다. 이에 대한 대안으로 제시된 피질골 궤도 나사못(cortical-bone trajectory screw)은 덜 침습적인 후방 요추부 고정이 가능한 점과 몇몇의 생체 역학 연구에서 보고한 우수한 기계적 안정성을 장점으로 가지고 있다. 본 연구의 목적은 후방 감압술 후 후방 고정술 및 유합을 시행한 환자에 있어 피질골 궤도 나사못 고정술의 초기 실패에 관한 사례의 임상적 및 방사선적 결과를 알아보고자 함에 있다. 대상 및 방법: 요추의 퇴행성 척추 협착 및 척추 전방 전위에 대한 전통적인 척추 경 나사못 고정을 대안하여 피질골 궤도 나사못을 사용하여 2013년부터 2018년까지 수술적 치료를 시행한 311명의 환자를 대상으로 하였다. 수술 후 조기 고정 실패는 수술 후 6개월째, 외래 추시에서 시행한 컴퓨터 단층촬영(computed tomography) 및 방사선 사진상 나사못의 이완, 이탈 및 파손과 같은 고정 실패가 일어날 시로 정의하였다. 결과: 조기 고정 실패는 311예 중 46예(14.8%), 나사못 이완이 46예(14.8%), 이탈이 12예(3.9%), 파손이 4예(1.3%)에서 발생하였다. 해당 고정 실패가 일어난 부위 분석 시, L1이 7예(15.2%), L2가 3예(6.5%), L3가 4예(8.7%), L4가 4예(8.7%), L5가 4예(8.7%), 그리고 S1이 24예(52.2%)였다. 주로 말단 피질골 궤도 나사못 중에서도 S1 나사못에서 이완, 이탈 및 파손과 같은 고정 실패가 주로 발생하였다. 결론: 피질골 궤도 나사못 고정은 기존의 척추 경 나사못 고정과 비교했을 때 동등한 임상 결과 또는 적은 합병증을 나타낼 수 있는 하나의 대안이 될 수 있으나 골다공증이 있거나 특히 L5-S1 유합부위에서 전방지지구조가 되지 않는 조건일 때, 이완, 이탈, 파손 등의 조기 고정 실패가 나타나는 결과가 있었다.

초등학교에서 속력 관련 단원의 교육과정 및 교과서 내용 구성에 관한 논의 (Composition of Curriculums and Textbooks for Speed-Related Units in Elementary School)

  • 전영석
    • 한국초등과학교육학회지:초등과학교육
    • /
    • 제41권4호
    • /
    • pp.658-672
    • /
    • 2022
  • 초등학교 과학에서 속력 관련 단원의 독특한 교수·학습 곤란은 주로 학생의 수학적 사고력 및 속력의 측정과 관련된 절차적 지식의 부족에 기인한 것으로, 교육과정 및 교과서는 이점을 고려하여 구성할 필요가 있다. 속력 단원의 교육과정 및 교과서 내용 구성과 관련된 시사점을 얻기 위하여 2007 개정 교육과정부터 2015 개정 교육과정까지 3개 교육과정 및 이에 따른 교과서의 속력 관련 단원의 구성 체계와 내용을 살펴보고, 선행 연구에 비추어 적절성을 분석하였다. 분석 결과를 통해 현재의 내용 구성은 이동 거리와 시간 및 속력 사이의 입체적인 관계를 파악하기 보다는 암기에 의한 기계적 알고리즘을 통해 물체의 속력만을 계산할 위험이 있어 이중 수직선과 같은 시각화 모형 및 간단한 수를 활용하여 속력의 의미를 단계적으로 학습할 수 있도록 재구성할 필요가 있다는 점을 밝혔다. 또한 조사를 통해 얻은 자료를 이용하여 물체의 운동을 해석하는 활동보다는 실제 운동하는 물체의 이동 거리와 걸린 시간을 직접 측정하여 그래프로 나타내고 분석하도록 함으로써 과정 기능 등 탐구 수행 능력을 향상시키는 것의 필요성에 대해 논의하였다. 마지막으로 적용 차시에서 현재의 교육과정과 교과서에서는 일상생활과의 연계를 강조하고 있지만 단원의 주된 학습 내용인 운동학과는 다소 다르게 동역학과 관련된 내용을 다루고 있어 학습한 내용을 익히고 활용할 수 있도록 속력과 관련된 사례를 중심으로 내용을 새롭게 구성할 필요가 있다는 점을 밝혔다. 새 교육과정 및 교과서에서는 학습하기 어렵고 지도하기 까다로운 내용을 제외하기 보다는 과학의 가치를 깨닫고 과학 학습을 향유할 수 있도록 핵심 주제를 체계적으로 깊이 학습할 기회를 제공할 것을 제안한다.

진공 텀블링을 이용한 해동 돈육의 이화학적 및 조직학적 특성 (Physicochemical and textural properties of thawed pork by vacuum tumbling)

  • 박수진;홍원호;오승민;조창희;천지연
    • 한국식품저장유통학회지
    • /
    • 제31권3호
    • /
    • pp.423-432
    • /
    • 2024
  • 본 연구에서는 육가공 산업의 필수 공정인 냉동육 해동 시 발생하는 식육의 품질 저하를 최소화하기 위하여 진공 텀블링 해동 방식을 적용하고자 산업용 국산 임펠러-진공 텀블러(DVT, 6 ton)를 고안하고 이를 이용하여 해동한 냉동 돈육의 품질 특성을 현재 상업적으로 이용하는 자연해동(NTA)과 수입산 진공 텀블링 해동(IVT) 특성과 비교 분석하였다. 냉동 돈육(앞다리)의 자연해동 시간은 4,200분인데 반하여 DVT 해동은 165분이 소요되어 냉동 돈육 해동시간이 약 25배 단축되었다. 해동 시 돈육의 드립감량은 자연해동 2.08%에 비하여 DVT 해동은 0.85%로 낮아져 높은 해동 수율(99.2%)을 얻을 수 있었다. 자연 해동육에서 대장균군이 0.10±0.17 log CFU/g 수준으로 검출된데 반하여 DVT 해동육의 pH는 5.92, 총균수 1.96±0.01 log CFU/g, 대장균군 불검출로 높은 신선도를 보였다. 또한, DVT 해동육의 지방산패도(TBARS) 0.31±0.01 MDA mg/kg와 단백질변패도(VBN) 5.67±1.98 mg%를 보여 자연해동 돈육(각각 0.42±0.01 MDA mg/kg와 6.86±0.00 mg%)에 비해 지방과 단백질 변패도를 유의적으로 낮출 수 있는 것으로 나타났다. DVT 해동육의 보수력은 97.50±0.90%로 자연해동육(95.24±0.03%)에 비해 유의적으로 높았다. 자연해동(NTA) 후 조리한 돈육은 경도 212.03±0.02 N과 씹힘성 885.36±0.80이 진공 텀블링(DVT, IVT) 해동육에 비하여 각각 6.1배와 4.7배 높게 나타나 진공 텀블링 해동이 부드러운 조직감을 갖는 식육을 생산할 수 있는 것으로 나타났다. 해동육과 이를 가열조리한 돈육의 미세구조(SEM)를 관찰한 결과, 진공 텀블링 해동(DVT, IVT) 시료에서 근원섬유의 손상이 적어 섬유배열과 간격이 촘촘한 구조를 나타냈다. 본 연구에서 국내 최초로 고안한 산업용 대용량 진공텀블러는 해동 시 근육 조직의 손상을 최소화하여 보수력을 높이고, 드립감량을 감소시켜 부드러운 조직감과 함께 생산 수율을 높일 수 있을 뿐만 아니라 미생물학적 및 이화학적 변패도를 최소화할 수 있어 고품질의 육제품 생산에 활용될 수 있을 것으로 보인다. 또한, 본 장치는 수입산 진공텀블러와 비교해 우수한 품질의 해동육을 생산할 수 있어 본 연구자료를 이용한 국산 기술 자립화, 제품 품질 개선 및 수율 향상 등 육가공 산업 발전에 기여할 수 있을 것이라 사료된다.