• Journal of Periodontal and Implant Science
• /
• v.24 no.3
• /
• pp.529-540
• /
• 1994

Rapidly progressive periodontitis is known to be usually associated with systemic problems and improved with antibiotic therapy. Recent experiments in which bioresorbable polycaprolactone was polymerized with minocycline has shown that the system released effective antibiotic concentration during the 7 days' period. This clinical trial was to compare the efficacy of a minocycline film(poly-caprolactone+polyglycol+10% minocycline) insertion plus supragingival scaling(MS) or subgingival scaling & root planing(MSRP) with the scaling(S) or subgingival scaling & root planing alone(SRP), at improving the periodontal condition in RPP. Fifteen patients were examined for plaque accumulation, gingival inflammation, probing depth and attachment loss at baseline, then 1, 2, 4 and 8 weeks after 4 treatment regimens were randomly undergone in 4 comparable sites(PD>5mm, LA>3mm) in each subject. Results revealed statistically significant treatement effect with a reduction in a probing depth in SRP(2.0mm), MS(1.8mm), and MSRP(2.1mm). There was no significant reduction in the supragingival scaling alone group(0.6mm). Similarly, attachment levels were significantly improved in the SRP(1.5mm), MS(2.0mm) and MSRP(2.0mm) groups. Net % BOP reduction at 8 week compared to baseline was 6.7% (S), 26.7% (MS), 26.7% (SRP), and 33.3% (MSRP). MSRP produced the greatest improvement in BOP at 8 week. This data suggests that a subgingival minocycline delivery system as a adjunct to scaling alone or scaling & root planing may produce significant clinical benefits over scaling alone in rapidly progressive periodontitis patients.

• Composites Research
• /
• v.17 no.6
• /
• pp.22-27
• /
• 2004

The objective of this work is to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that is asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials are selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSSFIP elements inserted into structural layers were designed fur satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was $16{\;}{\tiems}{\;}8$ array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75 (1.875kN) load level, Experimental results were compared with single load level fatigue life prediction equations (SFLPE) and in good agreement with SFLPE. SAS concept is the first serious attempt at integration fur both antenna and composite engineers and promises innovative future communication technology.

• Biomedical Science Letters
• /
• v.10 no.4
• /
• pp.459-465
• /
• 2004

The use of hemofiltration has been proposed to reduce excessive body fluid and inflammatory mediators produced during cardiac surgery with cardiopulmonary bypass (CPB) in infants and children. This study was undertaken to evaluate the efficacy of hemofiltration in adult cardiac surgery using (CPB). Twenty adult patients scheduled for elective cardiac surgery were randomly assigned to control group without hemofiltration (n=10) or hemofilter group with hemofiltration during CPB (n=lO). CBC and serum levels of interleukin-6 (IL-6), D-dimer, endothelin-l (ET-1), and cortisol were measured at before the initiation and immediately after the termination of CPB (Pre-CPB and End-CPB, respectively). Clinical data were assessed at postoperative period. In hemofilter group hematocrit was significantly higher (30.04±2.63％ vs 23.30±2.71％, P=0.0014) whereas total leukocyte count was lower than in control group (7.71±1.78×10³/㎣ vs 16.01 ±3.12x10³/㎣, P=0.021) at End-CPB. Increased rate of IL-6 (311.56±97.31％ vs 825.45±102.56％, P=0.012) and D-dimer levels (154.55±89.04％ vs 308.33±157.64％, P=0.026) at End-CPB were significantly less in hemofilter group than in control group. Postoperative blood transfusion in hemofilter group was low compared with that of control group (741.00±38.07 ml vs 1,137.50±169.82 ml, P=0.037). There were no significant differences between two groups in platelet count, ET -1, cortisol, pulmonary index, mechanical ventilation, postoperative blood loss, ICU-stay and hospitalization. Hemofiltration technique applied in the present study provided partly beneficial effect in adult cardiac surgery.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.211-216
• /
• 2008

In this study, we have developed a program which can calculate phase and group velocities, attenuation and wave structures of each mode in multi-layered plates. The wave structures of each mode are obtained, varying material properties and number of layers. The key in the success of guided wave NDE is how to optimize the mode selection scheme by minimizing energy loss when a structure is in contact with liquid. In this study, the normalized out-of-plane displacements at the surface of a free plate are used to predict the variation of modal attenuation and verily the correlation between attenuation and wave structure. It turns out that the guided wave attenuation can be efficiently obtain from the out-of-plane displacement variation of a free wave guide alleviating such mathematical difficulties in extracting complex roots for the eigenvalue problem of a liquid loaded wave guide. Through this study, the concert to optimize guided wave mode selection is accomplished to enhance sensitivity and efficiency in nondestructive evaluation for multi-layered structures.

• Steel and Composite Structures
• /
• v.33 no.6
• /
• pp.849-864
• /
• 2019

One way to achieve sustainable construction is to reduce concrete consumption by use of more sustainable and higher strength concrete. Modern building codes do not cover the use of ultra-high strength concrete (UHSC) in the design of composite structures. Against such background, this paper investigates experimentally the mechanical properties of steel fibre-reinforced UHSC and then the structural behaviors of UHSC encased steel (CES) members under both concentric and eccentric compressions as well as pure bending. The effects of steel-fibre dosage and spacing of stirrups were studied, and the applicability of Eurocode 4 design approach was checked. The test results revealed that the strength of steel stirrups could not be fully utilized to provide confinement to the UHSC. The bond strength between UHSC and steel section was improved by adding the steel fibres into the UHSC. Reducing the spacing of stirrups or increasing the dosage of steel fibres was beneficial to prevent premature spalling of the concrete cover thus mobilize the steel section strength to achieve higher compressive capacity. Closer spacing of stirrups and adding 0.5% steel fibres in UHSC enhanced the post-peak ductility of CES columns. It is concluded that the code-specified reduction factors applied to the concrete strength and moment resistance can account for the loss of load capacity due to the premature spalling of concrete cover and partial yielding of the encased steel section.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.157-160
• /
• 2002

This study was carried out to the harvesting efficiency of equipment used fer harvesting of rhizomes of Saururus chinensis Bail. Labor-saving efficiency showed 60-67% enhancement by using tillage operations with power tiller, digger attached to power tiller, and digger attached to tractor compared with manual harvest. Loss percentage of rhizomes by harvesting equipments was 2.2-8.8% lower than by manual harvest. Fresh rhizome yield and income index were increased 3-10% and 13-27% respectively by harvesting equipments, showing the highest yield and index in digger attached to tractor, Thus, digger attached to tractor showed the most effective harvest equipment for Saururus chinensis rhizome.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.336-336
• /
• 2017

High mortality and slow growth of seedling generally occurred in tray due to cold, foggy weather and severe seedling blight. Mechanical transplanting is hampered, farmers having economic loss. A sustainable method for raising mat type seedling is necessary. Experiments were conducted on disease control and seedling growth in dry seasons. Fungicides treated/untreated seeds were sown 120-130g in each tray containing pulverized fine grain loam/sandy loam soils. Seed covered with a thin layer of soil and irrigated. It was polythene covered (PC) for 72h and then every night along with 2/3 sprinkler irrigation (SI) per day. Untreated seedlings infected 53-93%. Pyraclostrobin, Azoxystrobin and Azoxystrobin+Difeconazole treated seeds/sprayed (72h) seedlings had no disease. Seedling height was 11.7-13.2 cm with compact and thick root mat at 25 days. Seeds treated at 0.2-0.3% (18-20h) showed no disease but severely in untreated seeds in all locations. Seedling height (13.8 cm), leaf age (3.7) and root number (8.5) were better when NPK were applied at 3-4-3 g/tray. Spraying of urea (1%) in addition with MOP, theovit and $ZnSo_4$ at 0.6-0.6-0.2% on 7 and $15^{th}$ days was also effective. PC showed significant growth (29.1-34.5%). Root mat was not good in flooded irrigation (FI). Disease was higher in SI (66.7-97.3%) than FI (0.7-3.7%) in untreated seeds regardless of polythene use. The protocol would be effective for raising mat type seedling in cold environment.

• Journal of Sensor Science and Technology
• /
• v.19 no.2
• /
• pp.155-159
• /
• 2010

0.96$(Na_{0.5}K_{0.5})NbO_3$-0.04$(Ba_{(1-x)}Sr_x)TiO_3$ lead free piezoelectric ceramics were synthesized to enhance the piezoelectric properties of (Na,K)$NbO_3$. The systhesis and sintering method were the conventional solid state reaction method and general sintering method in air atmosphere. The polymorphic phase transition(PPT) was observed at all composition(0 $\leq$ x $\leq$ 0.05) when $(Ba_{(1-x)}Sr_x)TiO_3$ were added in the $(Na_{0.5}K_{0.5})NbO_3$. As Sr concentration was increased, grain size, dielectric loss(tan$\delta$) and mechanical quality factor($Q_m$) were decreased and piezoelectric constant($d_{33}$) and electromechanical coupling factor($k_p$) were increased within a limited value. The optimized piezoelectric and properties, $d_{33}$, $k_p$, $Q_m$, and tand, of 0.96$(Na_{0.5}K_{0.5})NbO_3$-0.04$(Ba_{(1-x)}Sr_x)TiO_3$ were 139 pC/N, 0.31 %, 95, 0.04 at the composition of x=0.04.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.637-642
• /
• 2012

Background Fingertip injuries involving subtotal or total loss of the digital pulp are common types of hand injuries and require reconstruction that is able to provide stable padding and sensory recovery. There are various techniques used for reconstruction of fingertip injuries, but the most effective method is functionally and aesthetically controversial. Despite some disadvantages, cross-finger pulp flap is a relatively simple procedure without significant complications or requiring special techniques. Methods This study included 90 patients with fingertip defects who underwent cross-finger pulp flap between September 1998 and March 2010. In 69 cases, neurorrhaphy was performed between the pulp branch from the proper digital nerve and the recipient's sensory nerve for good sensibility of the injured fingertip. In order to evaluate the outcome of our surgical method, we observed two-point discrimination in the early (3 months) and late (12 to 40 months) postoperative periods. Results Most of the cases had cosmetically and functionally acceptable outcomes. The average defect size was $1.7{\times}1.5$ cm. Sensory return began 3 months after flap application. The two-point discrimination was measured at 4.6 mm (range, 3 to 6 mm) in our method and 7.2 mm (range, 4 to 9 mm) in non-innervated cross-finger pulp flaps. Conclusions The innervated cross-finger pulp flap is a safe and reliable procedure for lateral oblique, volar oblique, and transverse fingertip amputations. Our procedure is simple to perform under local anesthesia, and is able to provide both mechanical stability and sensory recovery. We recommend this method for reconstruction of fingertip injuries.

• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.107-114
• /
• 2018

This paper presents a computational model of a gas foil journal bearing with shim foils between the top foil and bumps, and predicts its static and dynamic performance. The analysis takes the previously developed simple elastic foundation model for the top foil-bump structure and advances it by adding foil models for the "shim foil" and "outer top foil." The outer top foil is installed between the (inner) top foil and bumps, and the shim foil is installed between the inner top foil and outer top foil. Both the inner and outer top foils have an arc length of $360^{\circ}$, but the arc length of the shim foil is shorter, which causes a ramp near its leading edge in the bearing clearance profile. The Reynolds equation for isothermal and isoviscous ideal gas solves the hydrodynamic pressure that develops within the bearing clearance with preloads due to the ramp. The centerline pressure and film thickness predictions show that the shim foil mitigates the peak pressure occurring at the loading direction, and broadens the positive pressure as well as minimum film thickness zones except for the shortest shim foil arc length of $180^{\circ}$. In general, the shim foil decreases the journal eccentricity, and increases the power loss, direct stiffness, and damping coefficients. As the shim foil arc length increases, the journal eccentricity decreases while the attitude angle, minimum film thickness, and direct stiffness/damping coefficients in the horizontal direction increase.