Browse > Article
http://dx.doi.org/10.9725/kts.2018.34.3.107

Performance Predictions of Gas Foil Journal Bearing with Shim Foils  

Hwang, Sung Ho (Graduate School, Dept. of Mechanics and Design, Kookmin University)
Moon, Chang Gook (Graduate School, Dept. of Mechanics and Design, Kookmin University)
Lee, Jong Sung (Global Advanced Tech center, Advanced Component Team, Hanon System)
Kim, Tae Ho (School of Mechanical Engineering, Kookmin University)
Publication Information
Tribology and Lubricants / v.34, no.3, 2018 , pp. 107-114 More about this Journal
Abstract
This paper presents a computational model of a gas foil journal bearing with shim foils between the top foil and bumps, and predicts its static and dynamic performance. The analysis takes the previously developed simple elastic foundation model for the top foil-bump structure and advances it by adding foil models for the "shim foil" and "outer top foil." The outer top foil is installed between the (inner) top foil and bumps, and the shim foil is installed between the inner top foil and outer top foil. Both the inner and outer top foils have an arc length of $360^{\circ}$, but the arc length of the shim foil is shorter, which causes a ramp near its leading edge in the bearing clearance profile. The Reynolds equation for isothermal and isoviscous ideal gas solves the hydrodynamic pressure that develops within the bearing clearance with preloads due to the ramp. The centerline pressure and film thickness predictions show that the shim foil mitigates the peak pressure occurring at the loading direction, and broadens the positive pressure as well as minimum film thickness zones except for the shortest shim foil arc length of $180^{\circ}$. In general, the shim foil decreases the journal eccentricity, and increases the power loss, direct stiffness, and damping coefficients. As the shim foil arc length increases, the journal eccentricity decreases while the attitude angle, minimum film thickness, and direct stiffness/damping coefficients in the horizontal direction increase.
Keywords
bmp foil; dnamic performance; gas foil journal bearing; shim foil; satic performance;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Agrawal, G. L., "Foil Air/Gas Bearing technology: An overview", ASME paper No. 97-GT-347, 1997.
2 Heshmat, H., Walowit, J. A., Pinkus, O., "Analysis of gas-lubricated foil journal bearings," ASME J. Lubr. Technol., Vol. 105, pp. 647-655, 1983.   DOI
3 Peng, J.-P., Carpino, M., "Calculation of stiffness and damping coefficients for elastically supported gas foil bearings", ASME J. Tribol., Vol. 115, No. 1, pp. 20-27, 1993.   DOI
4 Kim, T. H., San Andres, L., "Heavily loaded gas foil bearings: A model anchored to test data", ASME J. Eng. Gas Turbines Power, Vol. 130, No. 1, pp. 012504, 2008.   DOI
5 Heshmat, H., "Advancements in the performance of aerodynamic foil journal bearings: High speed and load capability", ASME J. Tribol., Vol. 116, No. 2, pp. 287-294, 1994.   DOI
6 Kim, T. H., San Andres, L., "Analysis of advanced gas foil bearing with piecewise linear elastic supports", Tribol. Int., Vol. 40, No. 8, pp. 1239-1245, 2007.   DOI
7 Kim, Y. C., Lee, D. H., Kim, K. W., "Performance test of double-bumped air foil bearings", J. Korean Soc. Tribol. Lubr. Eng., Vol. 25, No. 2, pp. 108-113, 2009.
8 Lee, Y. B., Kim, T. H., Kim. C. H., Lee, N. S., Choi, D. H., "Dynamic characteristics of a flexible rotor system supported by a Viscoelastic Foil Bearing (VEFB)", Tribol. int., Vol. 37, No. 9, pp. 679-687, 2004.   DOI
9 Kim, T. H., San Andres, L., "Effects of a mechanical preload on the dynamic force response of gas foil bearings: Measurements and model predictions", ASME J. Tribol., Vol. 52, No. 4, pp. 569-580, 2009.
10 Sim, K. H., Lee, Y. B., Kim, T. H., Lee, J. W., "Rotordynamic performance of shimmed gas foil bearings for Oil-Free turbochargers", ASME J. Tribol., Vol. 134, No. 3, 2012.
11 Kim, T. H., Park, M. S., Lee, T. W., "Design optimization of gas foil thrust bearings for maximum load capacity", ASME J. Tribol., Vol. 139, No. 3, p. 031705, 2017.   DOI
12 Lim, J., "Air foil journal bearing having an improved top foil structure", KR Patent 101785291B1, 2017.
13 San Andres, L., Kim, T. H., "Analysis of gas foil bearings integrating FE top foil model", Tribol. Int., Vol. 42, pp. 111-120, 2009.   DOI