The purpose of this study was to identify the effects of mechanical traction applied to the knee joint on pain, knee range of motion (ROM), timed up and go (TUG) and Western Ontario and MacMaster Universities Osteoarthritis (WOMAC) in patients with knee osteoarthritis (KOA) of Kellgren-Lawrence radiological rating scale II or III. Twenty three patients participated in the experiment for a period of four weeks. After baseline assessment, the patients with KOA were randomized into two groups: the traction group ($n_1=12$), which received traction with general physical therapy; and the control group ($n_2=11$), which received general physical therapy only on unilateral knee joints. Patients received interventions once a day, three times a week, for four weeks. Wilcoxon signed-rank test was used to analyze the change of dependent variances within the group during pre and post intervention. Mann-Whitney U test was used to analyze the change of dependent variances as TUG and passive ROM between the two groups. Analysis of covariance was used to analyze the change of dependent variances as numeric pain rating scale (NPRS) and WOMAC score between the two groups. In Wilcoxon signed-rank test, the traction group improved significantly with regard to NPRS (p<.01), passive knee flexion ROM (p<.01), passive knee extension (p<.05), TUG (p<.01) and WOMAC scores (p<.01) after intervention for four weeks, but not for the control group. In the Mann-Whitney U test and analysis of covariance, no significant difference was seen among all the dependent variances after intervention for four weeks between the two groups. These outcomes suggest that further studies should be carried out to determine the effects of mechanical traction prior to using it for the treatment of patients with knee osteoarthritis.
Journal of the Korean Society of Physical Medicine
/
v.10
no.2
/
pp.35-45
/
2015
PURPOSE: The aim of this study is to investigate how upper thoracic manipulation and cervical stability training affects cervical range of motion and neck disability index of patients with chronic mechanical neck pain. METHODS: 30 patients with chronic mechanical neck pain, and randomly divided into the upper thoracic manipulation and the cervical stability training group. Upper thoracic manipulation group was conducted to the upper thoracic manipulation, and cervical stability training was conducted to the cervical stability training. Intervention period was 6 weeks, and 3 sessions, each of which was run for 5~10 minutes. The subjects were measured neck range of motion before and after intervention by electro-goniometer. Neck disability index was used to measure neck disability index Korean version. RESULTS: Comparison within groups, there were significant difference in neck range of motion before and after intervention, and Neck disability index significantly reduced in the cervical stability training group. The comparison between groups, there were no significant difference in neck range of motion and neck disability index. CONCLUSION: Upper thoracic manipulation and cervical stability training to the patients with chronic neck pain was helpful to improve neck range of motion and cervical stability training was helpful to improve neck disability index.
Kim, Dae Young;Yi, Hak;Lee, Sang Ryong;Kim, Bubryur;Lee, Dong-Eun
International conference on construction engineering and project management
/
2022.06a
/
pp.465-472
/
2022
Manual material handling is the one of the leading causes for musculoskeletal disorders (MSDs) and lower back discomfort. According to a study, construction formworkers suffer greater rates of muscular injuries and related illness due to manual activities. However, there is still a paucity of information on MSD, preventive posture issues, and corresponding solutions for construction aluminum formworkers. As a result, MSD and disregard of worker health and safety continue to exist at construction sites. Although preventive measures and strategies have been studied in previous research, we believe it is imperative to shed light on this problem through this study. This study aims to 1) implement a simple and cost-effective elevated bench to reduce MSDs, and 2) determine the rapid upper limbs assessment (RULA) and Ovako working posture analyzing system (OWAS) action catagory of workers in different postures to assess their MSD conditions and obtain an optimal position and posture using the Jack human modeling software and simulation tool. The study findings reveal a considerable reduction in MSD discomfort and which posture is acceptable in post-intervention instances.Thus results provide inexpensive and simple ergonomic interventions with favorable RULA and OWAS ratings that can be applied at construction sites. This study demonstrates workstation ergonomic intervention cases that can aid in understanding the urgency of applying existing research strategies into practice.
Objective: The purpose of this study was to identify whether cutaneous sensory (CS) changes induced by mechanical intervention (MI) increases the trigger point threshold of the same spinal segment as well as to investigate the relationship between the amounts of change in CS pressure pain thresholds (PPT). Design: Randomized controlled trial. Methods: Thirty-nine persons with myofacial pain (MFP) were recruited in this experiment. The subjects consisted of 20 men and 19 women (age 20-39). MI was applied on the subjects using the Graston technique for 5 minutes to induce CS changes. The CS changes were measured with sensory tests by using the Von Frey Filament, and PPT changes were estimated by using the pressure threshold meter. For the observation of sensory and PPT changes with time, the test was conducted for 15 minutes including a pre, post, and after intervention session. Results: CS threshold increased significantly when MI was applied (p<0.001). On the same spinal segment, changes in the right infraspinatus PPT was observed (p<0.001) but the PPT changes in other muscles were not significantly different. Furthermore, the control group CS and PPT were not significantly different. In addition, regression analysis showed that the CS changes have a larger impact on PPT in the same spinal segment (p<0.001). Conclusions: CS changes induced by MI make to change PPT on the same spinal segment. In other words, it is possible to identify PPT changes following CS changes except for the muscle which belongs to a different spinal segment. Therefore, application of MI is necessary for the CS changes in the same spinal segment. Furthermore, it can be useful in the clinical fields as a method of providing pain control and increasing the PPT.
Kim, Won-Jae;Nam, Tae-Hyun;Kim, Kyu-Soo;Chae, E-Up
The Korean Journal of Physiology
/
v.10
no.1
/
pp.49-54
/
1976
The change of heart rates during Flack Test was observed in the pregnant women, $24{\sim}48$weeks, of gestational age, to analyze mechanical and neural regulatory factors in responses to the positive lung inflation. The results obtained were summarized as followings: 1) Endurance tine of Flack Test was 37.6 sec, in the nonpregnant women, and 25.1 sec. in the pregnant women. 2) When Flack Test was employed, heart rate was decreased in early stage of Flack Test in the pregnant women, while heart rate was increased in the nonpregnant women. 3) In the pregnant women bradycardia due to abdominal mechanical intervention in early stage of Flack Test was prominent, while tachycardia was found in the nonpregnant women. 4) During Flack Test, tachycardia due to sympathetic central reflex activation was observed immediately after bradycardia in early stage of Flack Test. 5) It may be noted that Flack Test employed in the present study is a useful model to evaluate and analyze the neural and mechanical abdominal intervention factor in response to the positive inflation of lung in pregnant women.
Purpose: The purpose of this study was to examine the effect of oral hygiene for ventilator-associated pneumonia (VAP) incidence. Methods: This study was used a nonequivalent control group posttest design. This study was performed in two groups, experimental group and control group. The experimental group (36 patients) had performed oral care for 6 times a day. The control group (39 patients) had followed and 3 times oral care a day. Participants were patients of 20 years of age or older on mechanical ventilation more than 48 hours from July 5 to October 31 in 2007 at the medical and surgical ICU of C university hospital. Results: VAP occurred in 5 cases in the control group, while only 1 case occurred in the experimental group. Incidence for 1000 ventilator day was 12.59 in the control group and 2.18 in the experimental group. Conclusion: Nursing intervention of 6 times oral care a day proved to decrease incidence of VAP. A guideline should be made using the above nursing intervention for the critical ill patients receiving mechanical ventilation.
The purpose of this study was to determine the effect of mechanical horseback riding training on trunk control, balance function in stroke patients. 15 stroke patients were recruited for this study. The subjects were randomly assigned to two groups: experimental(n=7) and control(n=8). All subjects received a routine physical therapy. The mechanical horseback riding training was for 30 min in the case of the EG subjects. This study was carried out approximately 8 weeks from March 4 to May 3. The assessment tools of this study involved the trunk control test, postural assessment scale for stroke, Berg balance scale and timed up and go test. The measurements were recorded before the intervention and after the intervention. In the cases of the EG subjects and CG subjects, the variables measured after the intervention significantly differed from trunk control test, postural assessment scale for stroke, Berg balance scale and timed up and go test before the intervention (p<.05). Also, there were significant differences in trunk control test, postural assessment scale for stroke, Berg balance scale and timed up and go test at post test between the 2 groups (p<.05). The findings indicate that mechanical horseback riding training exerts a positive effect on trunk control, balance function in stroke patients. Further studies are required to generalize the result of this study.
Journal of the Korean Society of Physical Medicine
/
v.10
no.4
/
pp.69-80
/
2015
PURPOSE: The purpose of the present study was to apply joint mobilization in a sitting position and in a prone position to patients with acute mechanical neck pain and compare the immediate treatment effects in these two positions. METHODS: After the baseline was assessed, 46 patients were randomly assigned to two groups: experimental group I ($n_1=23$) for joint mobilization in the sitting position and experimental group II ($n_2=23$) for joint mobilization in the prone position at the symptomatic cervical level. The patients in both groups received treatment by unilateral posterior-anterior gliding for 30 seconds per trial, 10 trials per session, for a total of 5 minutes, and two trials of 10 active extending motions with distraction per trial. RESULTS: In the Wilcoxon signed-rank test, all the pain and physical function variables were significantly improved after intervention in both groups (p<.05). In the Mann-Whitney U test, which compared the differences before and after the intervention between the two groups, experimental group I showed significant improvement over experimental group II in resting pain (p<.01), satisfaction with the treatment (p=.01), left rotation (p<.01) and CCFE (p<.01). In the analysis of covariance results, experimental group I showed significant improvement over experimental group II in the most painful motion pain (p<.01) and the most painful quadrant motion pain (p<.01). CONCLUSION: These outcomes suggest that joint mobilization should be applied in sitting positions for patients with acute mechanical neck pain that feel pain during sustained positions, extension or rotation.
The automotive market has recently been investing much time and costs in improving existing technologies such as ABS (Anti-lock Braking System) and TCS (Traction Control System) and developing new technologies. Additionally, various methods have been applied and developed to reduce this. Among them, the development method using the simulation has been mainly used and developed. In this paper, we have studied a method to develop SILS (Software In the Loop Simulation) for TCS which can test various environment variables under the same conditions. We modeled hardware (vehicle engine and ABS module) and software (control logic) of TCS using MATLAB/Simulink and Carsim. Simulation was performed on the climate, road surface, driving course, etc. to verify the TCS logic. By using SILS to develop TCS control logic and controller, it is possible to verify before production and reduce the development period, manpower and investment costs.
The increasing requirement for consistency and quality in the automotive industry started the development of a Machine Vision Inspection System (MVIS) for a car seat bottom cushion frame with the goal of providing a higher precision Inspection System with minimal components and less human intervention. The modifications made to an existing PC-based MVIS were shown to improve the accuracy and precision of the system. By using four monochrome cameras, the working distance was lowered and the image distortions were lessened without resorting to extensive image processing. The inspection scripts were evaluated if it could recognize good and bad products and were shown to be robust and able to reach an acceptable level of precision. It was also shown that the amount of human interaction was lessened.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.