• Korea Trade Review
• /
• v.45 no.1
• /
• pp.47-64
• /
• 2020

For the past few years, the Korean government has been consistently expanding its national research & development budget to accelerate economic growth through technology innovation and the enhancement of international competitiveness in global markets. The objective of this paper is to define the concept and analyze the current status of national R&D programs by measuring R&D efficiencies. We determine R&D efficiency by reflecting inputs and outcomes of the five main agricultural R&D programs between 2010 to 2015, and by categorizing and regrouping figures that may affect R&D performance. Among 1,128 targeted projects, 832 projects with patents and thesis were selected for analysis in terms of measuring technology efficiency, pure technology efficiency, and efficiency of scale. Also, the Kruskal-Wallis test was also utilized as well. As a result of empirical analysis, figures that affected the efficiency level of national R&D programs included differences in research resources, research management levels and skills, and research field. This study can be utilized as a reference for re-establishing national agricultural R&D policies, such as enhancement of national technology competitiveness in the global market environment, improving and adapting to new agricultural conditions, market expansion, national agricultural R&D efficiency, aging rural population, agricultural management cost increase, and climate change mitigation.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.4
• /
• pp.55-59
• /
• 2016

In this paper, we propose a system for monitoring and controlling the level of the rainwater tank by installing an underground storage tank as one of ways to increase the utilization rate to solve the water shortage and imbalance. For this purpose, a microprocessor of ATMEL's Atmega 128 is used for the control module, and the sensor capable of measuring the water level uses a float type level sensor which is a kind of tactile sensor. In particular, the level sensor outputs the output in a industry standard dimension, so that the compatibility is improved so as to replace the existing sensor.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2847-2851
• /
• 2020

A simple water level measurement method based on wavelength division multiplexing (WDM) is proposed and demonstrated. The measurement principle is based on the change of Fresnel reflection occurring at the end facet of the optical fiber tip (OFT). To increase the spatial resolution of water level sensing, a broadband light source (BLS) and an arrayed waveguide grating (AWG) are employed. The OFTs are multiplexed with the dedicated wavelength channels of AWG. By measuring all of the reflection powers reflected at the OFTs with a proposed on-site reflectometer, the water level can be monitored continuously for a fast emergency response. Moreover, it can be implemented easily with the commercially available optical components and devices with the simple configuration.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.6
• /
• pp.69-77
• /
• 2019

Among the many factors that threaten the improvement of public health and quality of life, the proportion of fine dust is not so small, and the kinds and causes of the dust are also diversified. However, the domestic measuring instrument is in the initial stage and the certification system is insignificant. Recognizing the threat of fine dust for a long time, the United States has established a protocol of measurement standards and measurement methods and applied the developed fine dust measuring device authentication system. Through this system, the United States is leading the world's fine dust industry, technology and market. The EPA, FRM and FEM of the fine dust-related protocol were analyzed to reduce the harmful effects of repeated fine dust every year. In addition, light scattering method and spectroscopy method which can measure in real time by measuring method were examined, and the types and characteristics of fine dust measuring instrument of international certification level were analyzed. Finally, development and service plan of the domestic fine dust measuring instrument are presented.

• Journal of Information Technology Applications and Management
• /
• v.31 no.2
• /
• pp.15-34
• /
• 2024

This study aims to analyze the effect of absorptive capacity on technology collaboration performance and the moderating effect of innovation intermediaries. We set absorptive capacity (potential, realized) as independent variables and technology collaboration performance (relative technology level, development period, cost savings, new product development, collaboration satisfaction) as dependent variables, with innovation intermediaries as a moderating variable. We conducted a survey of 145 ICT companies that experienced technology collaboration and analyzed the data using 101 valid responses. The results show that potential absorptive capacity has a significant effect on new product development and collaboration satisfaction, while realized absorptive capacity has a significant effect on relative technology level, cost savings, and new product development. Furthermore, innovation intermediaries have a moderating effect between realized absorptive capacity and new product development. The contribution of this study to academia and industry is that it highlights absorptive capacity as a key factor influencing technology collaboration performance. The limitations of this study include the lack of accurate measurement of absorptive capacity and innovation intermediaries, as well as a lack of control over external factors. These limitations should be addressed through more in-depth research by systematically defining and measuring them in future follow-up studies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.91-98
• /
• 2012

This study is aimed to utilize a basic data for setting up an allowable air noise with IMO standard in accommodation and working areas of 24m longer fishing vessels. The air noise in accommodation and working areas of 300 tons class squid-jigger were evaluated and the levels were compared to the allowable levels of IMO. The results indicated that the maximum range of noise levels was estimated to be between 54.8dB (A) and 83.2dB, and the correlation between the distance from the main engine to measuring point and the maximum noise level of each point was shown to be y=-13.8log (r)+92.91 ($r^2=0.821$). In addition, except the case of making an accommodation area near to the engine room in 24m longer jigging vessels, it was evaluated that the accommodation noise regulation of 1,600 tons international voyage vessels with 60dB (A) or an improved noise level with 65dB (A) could be properly applied.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.16 no.2
• /
• pp.69-76
• /
• 1980

This paper describes the measurement of the underwater noises produced by the engine vibration around the engine room of stern trawler MIS Sae-Ba-Da(2275GT, 3,600 PS) and pole kner M/S Kwan-Ak-San (243 GT, 1000 PS) while the ship is stopping. The underwater noise pressure level was measured with the underwater level meter of which measuring range is 100 to 200 dB(re bLPa). A and B denotes the maximum pressure level measured at right beneath the bottom of the engine room, while the main engine of the Sae-Ba-Da revoluted at 750 and 500 rpm, respectively. C denotes that of the main engine of the Kwan-Ak-San revoluted at 350 rpm, and D that of the generator of the Sae-Ba-Da revoluted at 720 rpm. Thus A, B, C and D were set for the standard sound source for the experiment. The results obtained are as follows: 1. The noise Pressure level at A, B, C and D were 170.5,165,153 and 158dB, respectively. 2. When the check points distanted vertically 1, 10, 20, 30, 40, 50m from the sound source, the underwater noise presure levels were 170.5, 155, 148, 144 and 138 dB and the directional angle was 116\ulcorner in case of A. 3. The sound level attenuated at the rate of 20dB per 10" meters of the horizontal distance from the sound sources. 4. The frequency distribution of the noise was 100Hz to 10KHz and predominant frequency was 700 to 800Hzminant frequency was 700 to 800Hz

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.113-120
• /
• 2010

This research is to evaluate the arousal level by using cardiovascular response. PPG was used in this study as one of the method of measuring it rather than ECG (Electrocardiography) for the purpose of solving ergonomic problem of sensing. The participants were in the age group of 20 (mean=24, standard deviation=1.25): five men and five women. Each experiment composed with four identical sets. First, a black screen was displayed for 30 second rest. Then, the prepared 6 pair images were randomly presented for 10 second stimulation and for 30 second non-stimulation. PPG was measured on the earlobes of experimenters at 200Hz sampling frequency. PPG amplitude, PPI(Pulse to Pulse Interval), and PRV(Pulse Rate Variability) were analyzed according to arousal level. T-test was performed to compare between the PPG variables of rest and relaxation, rest and arousal, and relaxation and arousal. Relative to the rest state, PPG amplitude decreased in relaxed state and increased in aroused state. Relative to the rest state, PPI decreased in both emotional states. However, more significant decline was observed in aroused state. PRV's LF and HF were used in the form of LF/HF to compare between the relaxed and the aroused state. Therefore, PPG signal showed significant differences between relaxed and aroused state. In conclusion, evaluation of human arousal level used in the PPG analysis demonstrated that PPG has better usability and comforter measurement than ECG and is clearly an alternative method of measuring arousal level.

• Journal of Institute of Convergence Technology
• /
• v.5 no.1
• /
• pp.13-17
• /
• 2015

In wafer level molding progress, the thermal releasing failure phenomenon is shown up as the important problem. This phenomenon can cause the problem including the warpage, crack of the molded wafer. The thermal releasing failure is due to the insufficiency of adhesion strength degradation of the molding tape. To solve this problem, we studied experimental method increasing the release property of the molding tape through the plasma surface treatment on the wafer substrate. In this research, the vacuum plasma treatment system is used for release property improvement of the molding tape and controls the operating condition of the hydrophilic($O_2$, 100kW, 10min) and hydrophobic($C_2F_6$, 200kW, 10min). In order to perform the peeling test for measuring the releasing force precisely, we remodel the micro scale material property evaluation system developed by Korea institute of industrial technology. In case of hydrophilic surface treatment on the wafer substrate, we can figure out the releasing property of molding tape increase. In order to grasp the effect that it reaches to the release property increase when repeating the hydrophilic treatment, we make an experiment with twice treatment and get the result to increase about 12%. We find out the hydrophilic surface treatment method using plasma can improve releasing property of molding tape in the wafer level molding process.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.27-35
• /
• 2005

Non-point source pollution, which is found in soil, urban area, and agricultural area, is difficult to have its amount to be estimated. Moreover, it is hard to come up with a counterplan to cope with this pollutant. Hence, the watershed of Mandae-cheon located at the upstream of Soyang Lake was chosen as our site of study. We analyzed the relationship between precipitation level of each month and pollution load in the watershed by using statistical methods: measuring BOD, T-N and T-P - which are the causes of eutrophication - in the water; and analyzing the changes in water quality caused by precipitation level of nth.