• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.20-25
• /
• 2005

An x-ray PIV (Particle Image Velocimetry) technique was developed fur measuring quantitative information on flows inside opaque conduits and/or opaque-fluid flows. To check the performance of the x-ray PIV technique developed, it was applied to a liquid flow in an opaque Teflon tube. To acquire x-ray images suitable for PIV velocity field measurements, the refraction-based edge enhancement mechanism was employed with seeding detectable tracer particles. The amassed velocity field data obtained were in a reasonable agreement with the theoretical prediction. The x-ray PIV technique was also applied to get velocity fields of blood flow and to measure size and velocity of micro-bubbles simultaneously, and to visualize the water refilling process in bamboo leaves. The x-ray PIV was found to be a powerful transmission-type flow imaging technique fur measuring quantitative information of flows inside opaque objects and various opaque-fluid flows.

• Korea-Australia Rheology Journal
• /
• 제16권4호
• /
• pp.163-168
• /
• 2004

In this study, an ultrasonic technique was employed to obtain pressure-volume-temperature (PVT) rela­tionship of polymer melt by measuring ultrasonic velocities under various temperatures and pressures. The proposed technique was applied to on-line monitoring of injection molding process as an attempt to predict quality of molded parts. From the comparison based on Tait equation, it was confirmed that the PVT behav­ior of a polymer is well described by the variation of ultrasonic velocities measured within the polymer medium. In addition, the changes in part weight and moduli were successfully predicted by combining the data collected from ultrasonic technique and artificial neural network algorithm. The results found from this study suggest that the proposed technique can be effectively utilized to monitor the evolution of solid­ification within the mold by measuring ultrasonic responses of various polymers during injection molding process. Such data are expected to provide a critical basis for the accurate prediction of final performance of molded parts.

• Composites Research
• /
• 제15권5호
• /
• pp.19-26
• /
• 2002

본 연구에서는 레이저 계측시스템을 이용하여 복합재료 구조물의 실제결함을 검출하였다. 다양한 하중을 적용하여 충격에 의한 복합재료 적층판의 층간분리, 하니컴 구조에서의 접착분리, 복합재료 적층판의 자유단 층간분리, 그리고 접착조인트 구조의 접착부위 접착부위와 같은 네 종류의 시험편을 제작하였고 ESPI와 전단 간섭계의 레이저 계측시스템으로부터 결함을 검출하였다. 열하중 방법을 통하여 시험편의 표면에 변형을 쉽게 일으켜 결함을 검출하였다. 실험결과 복합재료 구조물의 실제결함을 ESPI와 전단 간섭계로부터 쉽게 검출하였으며 더 나아가 ESPI와 전단 간섭계로부터 다양한 종류의 복합재료 구조물의 결함을 검출하는데 있어서 유용하게 이용될 것으로 사료된다.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1220-1228
• /
• 2003

The mirage technique is proved to be powerful in measuring the thermal diffusivity of materials. In particular, its contactless nature makes it suitable for delicate samples and microscale structures. In this study, thermal-wave-coupling method is developed in a general form for both thermally thin and thick samples. In the suggested measuring scheme, the probe beam can be positioned close to the pump beam and the absolute position need not be measured. Therefore the new scheme provides a relatively simple yet effective way to determine the thermal diffusivity of thermally thick samples. Thermal diffusivities of bulk samples like Ni and Al were measured and the characteristics of mirage signal for a thin film were observed by using the mirage experimental setup. The apparent thermal diffusivity was measured by varying such parameters as probe beam height, size of pump beam, power of pump beam, and surface condition of sample. From the practical standpoint, it is shown that the size of the pump beam is the most important factor for accurate thermaldiffusivity measurement. Experiments using thin-film samples show that the thermal diffusivity of a substrate covered with thin film can be measured by photothermal mirage signals.

• 한국측량학회지
• /
• 제26권4호
• /
• pp.323-331
• /
• 2008

수치사진측량은 사진상에 나타난 대상물의 2차원적 형상으로부터3차원적 기하형상을 측정하고 묘사하는 기술로서 여러 과학 분야에서 그 활용가능성이 증대되고 있다. 그럼에도 불구하고 정밀을 요하는 건설 기계분야에서 수치사진측량 방법 대신 값비싼 계측장비를 이용하는 경우가 많고, 마땅한 계측장비가 없어 시각적인 방법으로 분석하는 경우도 발생한다. 따라서 본 연구에서는 보강토 옹벽 실내모형 시험 장치의 모형옹벽 파괴전과 파괴 후에 대한 모형지반 변형량을 빠르게 측정하기 위해 이동식 표정판을 이용한 수치근접사진측량기법을 개발하였다. 그리고 그 측정 결과값들은 각측정기로 획득한 결과값과 비교하였다.

• 풍력에너지저널
• /
• 제9권4호
• /
• pp.9-15
• /
• 2018

In a previous study, a technique for measuring wind speed and direction by using a roll-rotating three-axis ultrasonic anemometer was proposed and verified by wind tunnel tests. In the tests, instead of a roll sensor, roll angle was trimmed to make no up flow in the transformed wind speeds. Verification was done in point of the residual error of the rotation effect treatment. In this study, roll angle was measured from the roll motor encoder and the transformed wind speed and direction on the test section axis were compared with the ones provided to the test section. As a result, up to yaw $20^{\circ}$ at a wind speed of 12 m/sec or over, the RMS error of wind speed was within the double of the ultrasonic anemometer error. But at yaw $30^{\circ}$, it was over the double of the ultrasonic anemometer error. Regardless of wind speed, at yaw $20^{\circ}$ and $30^{\circ}$, the direction error was within the double of the ultrasonic anemometer error. But at yaw $10^{\circ}$ or less, it was within the error of the ultrasonic anemometer itself. This is a very favorable characteristic to be used for wind turbine yaw control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.156-156
• /
• 2000

In this paper, a new method for colour measuring is presented using fuzzy modeling technique. The fuzzy and polynomial inferences are used for obtaining RGB characteristic curve. The eight RGB real data from expert dye-stuff manufacturer, are simulated. The results show that the proposed method will is more excellent than other methods, in the colour measuring process of textile field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.61-63
• /
• 1998

A B-H curve measuring system for testing softmagnetic materials was constructed. This system can measure the B-H curve in the low frequency(0.1 - 1 Hz) range. The drift of the integrator can be moderately removed by software technique. The advantages of the developed system are easier to measure B-H curve compared with conventional measuring system and low cost.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.477-484
• /
• 1997

This paper describes the build-up force measuring system of 9.9 MN capacity which consists of nine force transducers of each having 1.1 MN capacity. We have specially designed a force transducer for a build-up force measuring system to reduce the uncertainty of a build-up system and to accomodate the new test procedure for a build-up system. It reveals that the relative uncertainty of the force measuring system is less than 1.5*10$^{-4}$ in the ran9e of 1-4.5 MN irrespective of loading direction. The force measuring system may be used to calibrate a 10 MN force standard machine to be used as a large force standard in Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1971-1975
• /
• 2003

This paper describes a technique, which analyzes the functional instability of the ankle using three-dimensional scanner. The technique is based on the structured light pattern projection method, which is performed by using one digital still camera and one LCD projector. This system can be easily realized with the low cost. The measuring result has high accuracy. The measuring error is about 0.2 mm or less. Using this technique the three-dimensional posture of the leg and foot of the target person are measured and analyzed.