• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.48-54
• /
• 1995

선박용 추진기의 단독시험을 위한 소형시험기를 설계제작하고 모형선 예인수조에서 검증시험을 실시하였다. 제작된 시험기는 전동기의 반동력을 스트레인 게이지를 이용하여 직접 계측함으로써 재래의 시험기에서 사용하고 있는 마모성 슬립링을(Slip Ring) 제거하였다. 또한 기기의 구조 부재를 검력계의 검출부로 사용함으로써 소형의 모형선에 탑재될 수 있도록 경량화 및 소형화를 이룩하였다. 개발된 이 제품은 회류수조 등에서 효과적으로 사용될 수 있을 뿐만 아니라 선형시험수조 및 캐비테이션 터널에서 사용될 각종 시험 기기 설계의 기초기술을 포괄하는 것으로 평가된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1346-1353
• /
• 1993

Recently , it has been popular for family use to sell a watermelon by the piece such as a half or a quarter. Therefore, it has been necessary to detect and sort out hollow or overripened watermelons before they are shipped. Previously, inspection and rejection of hollow or overripened watermelons were carried out by skilled inspectors with their experience and intuition based on the traditional slapping method. In recent years many inspectors have became older and are going to retire. Thus automatic quality measuring devices have to be developed. There are many reports on the measurement of internal quality for watermelons with non-destructive methods. However, there is no online device to detect and measure both hollow and ripeness of watermelons until now. We have developed the model MWA-9002 online device to detect hollow and measuring the ripeness of watermelons by acoustic impulse. The developed of this devices has enables accurate distinction and rejection at the same level of the skilled inspectors, and also has saved labor. Nowadays nine automatic watermelon sorting and packing facilities applied this device have installed in Japan.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1027-1035
• /
• 2014

휴대용 기기에서 가장 중요한 설계 요소는 소비 전력이다. 본 논문에서는 휴대용 온습도 측정기 설계 초기에 전력 소비 모델을 제시하고, 제시된 모델에 입각해 휴대용 온습도 측정기의 소비 전력을 설계한다. 이렇게 설계된 휴대용 온습도 측정기의 소비 전력을 사전 검증함으로써 제품 구현 전에 설계 검증을 완료하기 위한 전력 소비 설계 모델링 방안을 제시하고자 한다. 한편, 대기 모드에서 소비 전류를 효과적으로 감소시키기 위한 전력 소비 설계 개선 방안도 제시한다. 휴대용 온습도 측정기 구현을 통해 전력 소비 모델링에 입각한 설계 방법론의 타당성을 확인할 것이다.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.222-233
• /
• 2010

Developed in this research is a TP (tangible prototyping) system, which consists of two modules; (1) a virtual reality model to evaluate the functions and appearance of the product, and (2) a haptic device to emulate tactile and kinesthetic properties of mechanical dial knobs. As an example, a washing machine is modeled using a commercial CAD system and transformed in VRML and X3D formats. Some dynamic behaviors and kinematic characteristics are programmed using X3D script and Java. Various haptic behaviors of the dial are generated by modulating torque profile according to the rotation angle. A torque profile measuring system is developed to evaluate the behaviors of the haptic dial physically. Haptic sensibility evaluations are accomplished using the TP by semantic differential method.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1046-1053
• /
• 2017

We propose a design method of high accuracy power measuring device and the method of securing the reliability of the measured data. As a design method for the development of the high accuracy power measuring device, the circuit was made by reflecting the high accuracy power measuring ICs and the CT (Current Transformer). To ensure the reliability of the power meter, we requested to the watt-hour meter certified testing organization to measure the error rate, and the error rate of active power based on the "Wattmeter Technical Standard(Revision notify 2014-283)" was measure, and the error rate was confirmed to be less than 0.1%.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.3-7
• /
• 2000

The authors have realized reconstruction of 3D shape using contacting method with pins and TCP/IP communication. In this paper, the working principal of the mechanism is proposed and tested. A special sensor system is designed as 148 matrix form to measure 3D shape. When contact occurs between pin and the plate of the sensor matrix, the position information of pins is sent to computer and raised height data of the pin is obtained by counter which accumlates encoder signal. So, all datum which contain 3-dimensional coordinate, is transferred using TCP/IP communication. Finally, 3D shape is reconstructured by Web browser of remote computer. The measuring result shows that the proposed mechanism is reliable and promising as a remote measuring device through Internet.

• 한국입자에어로졸학회지
• /
• 제15권2호
• /
• pp.67-78
• /
• 2019

Since existing measurement sites are required to construct a high-cost PM measuring device and a measuring site of a large area, there is a limit to the construction of a high-resolution measurement network. Therefore, it is necessary to develop a low-cost, high-performance PM measuring device (as an alternative technology) that can increase the resolution of PM measurement, and it is necessary to establish a base to provide real-time PM information for whole people. Therefore, in this study, the alternative technique (light scattering method) for achieving the above object was examined, performance evaluation was carried out, and it was verified that the light scattering method was usable. Various PM measurement results were compared and analyzed to find PM monitoring points and resolutions we would like to propose.

• 대한한의진단학회지
• /
• 제15권2호
• /
• pp.203-214
• /
• 2011

Objectives: The objective of the current study is to determine whether an ultrasound device system is adequate for measuring distance from the abdominal surface of Sangwan (CV13) to peritoneum in front of anterior surface of liver. Methods: We recruited 3 healthy young male subjects and 2 sonographers. The each sonographer measured vertical shortest distance from the abdominal surface of Sangwan (CV13) to peritoneum in front of anterior surface of liver with a ultrasound device with three methods of 3.5 MHz convex probe and gel, 9 MHz linear probe and gel, and 9 MHz linear probe and solid gel pad, three times in random order. Because the total variation could be divided into repeatability, reproducibility and subject-to-subject variation in Gage R&R method, we compared the sources of variation associated with the measurement system with an analysis of variance model. Results & Conclusions: Number of distinct categories is calculated on the basis of standard deviation of subject-to-subject divided by standard deviation of total Gage R&R. If the number of categories is five or more, the measurement system may be acceptable for the analysis of the process. The number of distinct categories of the ultrasound device system for measuring distance from the abdominal surface of Sangwan (CV13) to peritoneum in front of anterior surface of liver were 9.20 (9 MHz linear probe and gel), 14.70 (9 MHz linear probe and solid gel pad). So we concluded that repeatabilities and reproducibilities of the ultrasound device system for measuring distance from the abdominal surface of Sangwan (CV13) to peritoneum in front of anterior surface of liver with the methods of 9 MHz linear probe and gel, and 9 MHz linear probe and solid gel pad were acceptable.

• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.217-223
• /
• 2007

This paper introduces an active sensing node using radio-frequency (RF) telemetry. This device has brought the traditional impedance-based structural health monitoring (SHM) technique to a new paradigm. The RF active sensing node consists of a miniaturized impedance measuring device (AD5933), a microcontroller (ATmega128L), and a radio frequency (RF) transmitter (XBee). A macro-fiber composite (MFC) patch interrogates a host structure by using a self-sensing technique of the miniaturized impedance measuring device. All the process including structural interrogation, data acquisition, signal processing, and damage diagnostic is being performed at the sensor location by the microcontroller. The RF transmitter is used to communicate the current status of the host structure. The feasibility of the proposed SHM strategy is verified through an experimental study inspecting loose bolts in a bolt-jointed aluminum structure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1609-1612
• /
• 2008

RQ(Respiratory Quotient) value is obtained from the ratio of the consumed oxygen and the produced carbon dioxide during the patient's respiration. To investigate the efficacy of insulin and diagnosis the metabolic disorder in short time, the RQ value can be used as important parameter. The measurement of oxygen and carbon dioxide amounts is needed large chamber and complex sensors. But If the atmospheric oxygen and carbon dioxide concentrations do not change, the expiratory oxygen and carbon dioxide can be used to obtain RQ value. A convenient RQ measuring device has been developed by using two sensors for O2 and CO2. The estimation of RQ devices confirms that the RQ device can obtain accurate data by eliminating uncertain factor such as delay time and remaining gases.