• Transactions of the Korean Society of Machine Tool Engineers
• /
• 제17권1호
• /
• pp.106-112
• /
• 2008

In this paper, It does the profile measurement of the cam of diesel engine SOHC of the actual object. It uses the measurement of run-out method. This method is that the surface of the object is measured by the sensor when the object rotate, and calculated and displayed by the computer the signal which acquired by sensor. When we acquire the signals, we have two error because of motion and contacting between cam and probe. In this paper, we compensate the motion error while simply liner equation. And we have a solution that we change the figure of probe when we have a contacting error. We compared the data measuring on developed automatic cam profile measuring system with the data measured on CMM.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.372-374
• /
• 2002

In this paper, we studied for performance of traction and braking for on-line test and evaluation of korean high speed rail vehicle. It is composed of 6 DAMs(Data Acquisition Modules), 2 monitoring modules and 1 main computer. The software should set and control the hardware of the measuring system, perform the analysis and calculation of measuring data and interface between users and the measuring system. As a result, It has been shown a good performance of traction and braking for test vehicle.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제7권3호
• /
• pp.51-51
• /
• 1998

It is very important to test linear cycle positioning accuracy of Machining centers as it affect all other machines machined by them in industries. For example, if the linear positioning accuracy of each axes directions is bad, the size of works will be wrong and the change-ability will be bad in the assembly of machine parts. In this paper, measuring systems are organized to measure linear displacements of table or spindle of machine center using laser interferometer, magnescale and tick pulses comming out from computer in order to get data at constant time intervals from the sensors. And each set of data gotten from test is expressed to a plots by computer treatment and the results of linear positioning error motion is estimated to numerics by statistical treatments.

• Journal of the Korean Society for Precision Engineering
• /
• 제22권10호
• /
• pp.107-113
• /
• 2005

This paper presents a method to reduce errors in registration, which is used in transformation coordinate system of the multiple measuring data. In general, the ICP algorithms and feature-based approaches are used for registration. In order to measure wrap-around object, it is necessary to change the scanning direction or set-up of the object. A fixture is made to reduce registration errors caused by inaccurate center point of tooling balls, providing the more accurate registration method. And, the motorized fixture controls rotation and tilting to get precise the measuring data and registration. The proposed motorized fixture and registration method have advantages in accurate registration and precise measurement, compared with the conventional methods.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.821-822
• /
• 2006

Ubiquitous healthcare monitoring and measuring system based on wireless sensor network was implemented and tested. The system can measure the ECG and body temperature of patients or elderly persons and transfer the data wirelessly in ad-hoc network to remote base-station connected to doctor's PDA/PC or hospital server, using wireless sensor motes. The data obtained can be analyzed by doctors and care providers to monitor a health status of patient in real time environment. To prove the capabilities of the wireless sensor network platform for ubiquitous healthcare applications, the performance of our monitoring and measuring system was tested with positive results.

• Journal of Institute of Control, Robotics and Systems
• /
• 제9권9호
• /
• pp.714-719
• /
• 2003

We propose a measuring method of large object using the pattern matching. It is hard and expensive to get the complete 3D data when the object is large and exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method such as point pattern matching method and transform matrix algorithm. The laser slit beam and CCD camera are applied for the experimental measurement. Visual C＋＋ on Windows 98 is implemented in processing the algorithm.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• 제50권3호
• /
• pp.130-135
• /
• 2001

In this paper, the distribution characteristics of salt contaminants with the distance from sea in East coast, from Sokcho to Pusan of Korea peninsula were investigated to evaluate the design standard of KEPCO. To get the equivalent salt deposit density(ESDD), conventional brush wiping method was used. As the measuring period is comparatively short, and the measuring interval is long to check the maximum value, acquired ESDD data is very lower than the recommended value in the standard. The measured data didn't follow normal distribution, so it should take the statistical treatment. Through normalizing method, we could get a reliable probability data. In the past investigation, the accumulation characteristics of Japan is consulted to set the criterion, but the climatic condition of Korea is different to Japan. With the comparison of precipitation data and some measured data for long tern accumulation, we could set appropriate accumulation factor.

• Proceedings of the Korea Contents Association Conference
• /
• 한국콘텐츠학회 2016년도 춘계 종합학술대회 논문집
• /
• pp.255-256
• /
• 2016

In this paper, we analyze the operations and/or status of our structure which builds the management structure measuring integrated monitoring system based on linked open data in a short term or long term bases. We have applied a novel analyzing method of linked open data to expect what movements can be occurred in the structure, and we improve the monitoring system using an integrated design to solve the drawbacks of conventional types of monitoring. And collecting data through cloud and their reliability can be proved by evaluation of soundness of data amount and their confidence.

• Journal of the Semiconductor & Display Technology
• /
• 제19권2호
• /
• pp.51-54
• /
• 2020

To develop gas-distinguishing sensor system, it is highly required to integrate multiple sensors for effective detection of a single targeted gas or mixture of gases. In addition, it is important to collect the reliable data from individual sensors into one integrated measuring device. Collecting the data of toxic gases on the spot should be done without inhalation. We suggest simple wirelessly running system for data collection that guarantees both reliability of data sources and safety. Here, we made a multi-gas measuring instrument(device) combined with Bluetooth module which provides a safe and precise big data accumulation system.

• International journal of advanced smart convergence
• /
• 제13권1호
• /
• pp.12-22
• /
• 2024

Software applications have a huge and inseparable impact on our lives. The complexity of the applications increases rapidly to support high performance and multifunction. Accordingly, the cost model for applications is increasingly important. Line of Code (LOC) and Man-Month (M/M) as the cost model measure the quantitative sides of the applications. Unlike them, Function Point (FP) measures the functionalities of the application. FP is efficient for estimating qualitative characteristics, but it is restricted to measuring the cost of an application using the wireless data broadcast which can support any number of clients. In this paper, we propose, a Function Point model for Information services using wireles data Broadcast (FPIB) to measure the development cost of an application that serves using the wireless data broadcast environment. FPIB adopts critical parameters of the wireless broadcast environment and the complexity of them to measure effectively the cost developing the application. Through the evaluation comparing the proposed FPIB with FP, we reveal the effectiveness of the proposed FPIB.