• The Journal of Engineering Geology
• /
• v.14 no.2
• /
• pp.179-187
• /
• 2004

This study conducted a laboratory work to determine the change of dielectric constant of saturated soil porous media, which is injecting EML to use Frequency Domain Reflectometry(FDR) system and length 7cm-length measurement sensor. It is purpose of study that estimate a movement path through pore of soil for an ethanol mixing liquid(EML) which have the same specific gravity of water at $20{\;}^{\circ}C$, and determine to a dielectric measuring range for the measurement sensor. As an outflow point of saturated soil column upper part recedes from an EML inject point in EML diffusion test, the diffusion extent of EML through pore of saturated soil was expanded. And results of ail EML flow experiment were measured the change of dielectric constant at all measurement sensors which are placed to constant interval at the same travel time for saturated soil column. Therefore, the displace process of water that exist in pore of saturated soil by EML injection is enough available and confirm together mobility through pores.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.3
• /
• pp.97-102
• /
• 2005

This research was a fundamental study for the low temperature sintering of PZTN by glass phase transient processing. To lower the sintering temperature, the glass phase Processing was used. Also to improve the electrical properties, the transient processing was utilized. After characterization, the various analytic techniques, such as Archimedes method for the measuring densification, x-ray diffraction patterns for the quantitative analysis of crystalline phases were utilized. Also the dielectric constant, dissipation factor, and piezoelectric coefficients were measured to evaluate the PZTN sintered at the $950^{\circ}C$ and $1050^{\circ}C$. This was confirmed that the sintering temperature of PZTN was reduced by $950^{\circ}C$ and the electrical properties were improved by the transition processing. Therefore, the glass phase transient processing can be applicable to low the sintering temperature with the dielectric and piezoelectric properties.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.219-223
• /
• 2001

The on-line cure monitoring during the cure process of composite materials is important for better quality and productivity. The dielectric sensor for cure monitoring consists of base film and electrodes. Because the characteristic of dielectric sensor for the on-line cure monitoring is dependent on the base material, width and number of electrode, etc, the dielectric sensor should be standardized. And the selection of base film material of sensor is very important. In order to prevent the measuring errors generated from the increase of environmental temperature, the base film material should have stable dielectric constant with respect to environmental temperature. In this study, the newly developed dielectric sensor for cure monitoring was designed and the dissipation factor which is function of degree of cure was measured using the sensor. The relationship between the dissipation factor and degree of cure with respect to environmental temperature was investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.470-473
• /
• 2001

In this study, 70/30 mol% P(VDF-TrFE) copolymer thin films were prepared by physical vapor deposition, and dielectric properties with frequency were investigated. From results of TA(Thermal Analysis), the Curie transition temperature and melting temperature were observed at 118.8$^{\circ}C$ and 146$^{\circ}C$, respectively. Therefore, while thin films were prepared, the substrate temperature was varied from 30$^{\circ}C$ to 90$^{\circ}C$. The dielectric constant decreased with increasing frequency. At measuring frequency of 1kHz, the relative dielectric constant increased from 3.643 to 23.998 with increasing substrate temperature from 30$^{\circ}C$ to 90$^{\circ}C$. As a result of dielectric loss factor, ${\alpha}$-relaxation and ${\beta}$-relaxation were observed near at 100Hz and 1MHz, respectively. And the magnitude of ${\alpha}$-relaxation decreased and that of ${\beta}$-relaxation increased with increasing substrate temperature.

• Journal of electromagnetic engineering and science
• /
• v.7 no.2
• /
• pp.53-58
• /
• 2007

A general method to formulate the tissue-equivalent liquids for SAR measurement is proposed to make sucrose-free brain tissue applicable at 835 MHz as an example We suggest the tissue composition can be determined by measuring the dielectric constants and conductivities with the DI water and salt addition variation to the pre-manufactured auxiliary liquid of DGBE and TritonX-100 The manufactured liquid satisfies the specified electrical parameters of international standard at 835 MHz.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.40-44
• /
• 1997

This paper presents the results of studies made for measuring the relative complex permittivity of PCB sheet material in he frequency a range of 100MHz∼1GHz using vector network analyzer. A measurement cell was developed for this purpose using broad-band impedance method and the dielectric constant and loss tangent of two PCBV sheet materials, glass-epoxy and teflon, were measured. The effect of copper cladding was studied.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.4
• /
• pp.277-281
• /
• 2017

Ferroelectric ceramics are broadly used for various industrial applications. In this research, the lead-free ferroelectric ceramics of $(K_{0.5}Na_{0.5})NbO_3$ was fabricated by using the solid state synthesis. The $(K_{0.5}Na_{0.5})NbO_3$ pellets were sintered at 1200, 1150 and $1100^{\circ}C$ for 4 hours in air atmosphere. Field-emission scanning electron microscopy (FE-SEM) characterization of the sintered KNN ceramics revealed surface morphology and grain size. And we used the X-ray diffraction (XRD) for measuring the sample crystal phase. Temperature dependence of the dielectric constant was measured by using an LCR meter. The sintered at $1150^{\circ}C$ for 4 hours sample has a highest dielectric constant 6011 at Curie temperature ($T_C$) and dense structure with $2.33{\mu}m$ grain size.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.739-751
• /
• 2021

The thawing process is usually essential for imported pork because this product is typically distributed frozen. Consumers prefer fresh pork because discoloration, nutrient spills, and microbial contamination are high during the thawing process. The illegal act of selling frozen pork by disguising it as fresh pork through various methods can occur for the benefit of the difference in the sales price. However, there is some difficulty in securing systematic and objective data, as sensory tests are generally performed on imported pork. In the experiment conducted here, the electrical conductivity and dielectric properties of pork neck and pork belly products were measured. The amounts of change before and after freezing were compared through a statistical analysis, and a new method for determining frozen meat was proposed based on the analysis results. The weight was reduced compared to that before freezing due to the outflow of drips from the thawing process, but there was no difference in the drip loss level due to the thawing method. Vacuum packaging was found to lead to more drip loss than regular packaging, but the difference was not statistically significant. Frozen pork neck meat can be determined by measuring the electrical conductivity in the lean parts and the dielectric characteristic in the fatty parts. Frozen pork belly is determined by measuring the dielectric constant of the part closest to the outer fat layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1001-1004
• /
• 2001

The (Sr$_{l-x}$Ca$_{x}$)TiO$_3$(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/SiO$_2$/Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained by substitution of Ca at 15[mol%]. The dielectric constant was increased -with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mol%]. The dielectric constant changes almost linearly in temperature ranges of -80~+90[$^{\circ}C$]. The temperature properties of the dielectric loss have a stable value within 0.02 independent of the substitutional contents of Ca. The current-voltage characteristics of SCT15 thin films showed the increasing leakage current as the measuring temperature increases.ses.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.10-15
• /
• 1990

Theory and experimental results of measuring the microwave dielectric characteristics of low-loss materials by using dielectric rod resonator method are presented. The $TE_{011}$ mode resonance frequency was adapted to minimize the effect of the air gap between the rod and the conducting plates. The dielectric properties were computed from the resonance frequency, sample geometry and 3 dB bandwidth. The error of measurements was within ${\pm}3{\%}$ for dielectric constant and was within ${\pm}12{\%}$ for dielectric loss.