• 한국안전학회지
• /
• 제9권1호
• /
• pp.19-27
• /
• 1994

A laser-based in-process measurement system for the evaluation of surface roughness In turning Is reported. The proposed measuring system makes it possible to detect the surface roughness not only circumferential path but also along the feed direction even during machining. Also, it permits the real-time measurement of surface roughness In dynamic condition.

• 한국음향학회지
• /
• 제13권3호
• /
• pp.41-50
• /
• 1994

이 연구에서는 3차원 음향 인텐시티를 동시에 측정할 수 있는 프로브를 이용하여 음향 인텐시티를 측정할 때 필연적으로 발생하는 오차를 컴퓨터의 수치계산으로 검토하였다. 이 3차원 음향 인텐시티 프로브는 Suzuki등에 의해 제안된 4개의 마이크로폰으로 구성된 것이고, 수치계산에서는 이상적인 점음원과 유한 크기를 가지는 면음원에 대해서 프로브의 각 축방향 및 임의의 방향에 대한 측정오차를 근거리 음장에서 분석하였다. 그 결과, 점음원의 경우 측정거리가 프로브를 구성하는 마이크로폰 사이의 간격보다 약 2.5배 이상 떨어진 거리에서 오차 1dB 이하의 정밀한 측정을 할 수 있었고, 유한 크기의 면음원의 경우, 면음원의 한 변의 길이가 0.02m이상일 때 근거리 음장의 측정오차가 크게 감소하기 시작하여, 한 변의 길이가 0.2m일 때 측정거리가 마이크로폰 사이의 간격보다 0.67배로 근접하여 측정하여도 1dB 이하의 정밀한 측정이 가능한 것으로 평가되어 이 프로브의 근거리 음장 측정의 유효성이 확인되었다.

• 소성∙가공
• /
• 제27권5호
• /
• pp.301-313
• /
• 2018

In this paper, tensile test was performed on pure titanium sheet (CP Ti sheet) with HCP structure in each direction to evaluate mechanical and surface properties and analyze microstructural changes during plastic deformation. We also evaluated forming limits of Ti direction in dome-type punch stretching test using a non-contact three-dimensional optical measurement system. As a result, it was revealed the pure titanium sheet has strong anisotropic property in yield stress, stress-strain curve and anisotropy coefficient according to direction. It was revealed that twinning occurred when the pure titanium sheet was plastic deformed, and tendency depends differently on direction and deformation mode. Moreover, this seems to affect the physical properties and deformation of the material. In addition, it was revealed the pure titanium sheet had different surface roughness changes in 0 degree direction and 90 degree direction due to large difference of anisotropy, and this affects the forming limit. It was revealed the forming limit of each direction obtained through the punch stretching test gave higher value in 90 degree direction compared with forming limit in 0 degree direction.

• 소성∙가공
• /
• 제28권3호
• /
• pp.154-158
• /
• 2019

The hole expansion tests using conical punch, flat punch or hemispherical punch are widely used for stretch flangeability verification of HSS. In this study, we investigate the strain distribution on the shear edges of the hole expansion test using grid marking and a projector. A small crack at the edge is distributed, resulting in a large gap between the HER and the crack strain. The strain distribution at the edges is irregular due to anisotropy of sheet metal. While an edge perpendicular to the rolling direction indicate a lower strain level compared to an edge parallel to the rolling direction, edge cracks occur at the edge perpendicular to the rolling direction. To predict the manifestation of edge cracks in FE analysis, the result of the hole expansion test with a crack strain measurement may well be a better tool than FLD. In this case, the level of strain and the direction of the edge relative to the rolling direction should be well considered.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.29-50
• /
• 1998

The purpose of this study is to critically review the previous research on the measurement of service quality, and to present future research directions on hotel service quality measurement as follows: 1. As Carman(1990) shows in his study, items of quality measurement should be developed to be fit for the measurement of hotel service quality. 2. To evaluate the service quality of a hotel, measuring three divisions(Room, F&B and Others) separately, then combining them would be the best model. 3. Researches to identify the various dimensions of hotel service quality are needed. 4. In measuring hotel service quality, guests should be classified according to various criteria. 5. To measure the hotel service quality, SERVPERF model might be more a, pp.opriate due to the small number of items to be answered. 6. In hotel industry, researches to identify causal pths between customer satisfaction and service quality are needed. 7. We need to develop alternative scales for the measurement of hotel service quality.

• 한국정보통신학회논문지
• /
• 제20권3호
• /
• pp.639-646
• /
• 2016

본 연구에서는 특수한 상황(미끄러짐 발생 및 회전관성이 부하로 작용하는 경우)에서의 회전 엔코더 기반 측정방법의 단점을 극복하기 위하여 광 변위센서(ADNS-9500)를 사용한 비접촉식 변위 측정방법을 제안하였다. 정확한 변위 측정을 위해 데이터 수집 보드와 랩뷰를 활용하여 실험적으로 광 변위센서의 성능을 분석하였으며, 반복실험을 통해 실험조건(측정방향, 속도, 가속도, 높이, 표면 재질)에 따른 광 변위센서의 성능특성을 파악하였다. 성능실험 결과, 광 변위센서를 사용하여 정확하게 평면운동을 측정하기 위해서는 광 변위센서와 지면(대상 물체의 표면)과의 높이를 2.4 mm-3.2 mm로 일정하게 유지시켜야 하며, 각각의 축 방향, 속도, 표면 재질을 고려하여 민감도를 수정하여 변위 계산식에 적용해야 하는 것을 확인하였다.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제25권3호
• /
• pp.233-249
• /
• 2022

측정은 학교 수학과 실생활 양측에서 중요하게 역할한다. 측정에서 다루는 여러 속성 중 길이는 가장 먼저 학습하는 것으로 측정의 기초가 되며 시간은 고유의 방법으로 측정하는 가장 추상적인 속성이라는 특징을 가지고 있다. 본 연구는 초등 수학 교과서와 실생활에서 나타나는 표현을 분석하여 학교 수학에서 학습하는 길이와 시간이 실생활에서 표현되는 것과 어떠한 차이가 있는지 살펴보고 앞으로의 교수 학습 과정에 대한 시사점을 도출하고자 하였다. 분석 결과, 길이에 대한 개념은 실생활과 학교 수학에서 같은 의미로 사용되고 있으나 거리, 깊이, 높이 등의 용어가 정의되지 않은 채 혼용되고 있었으며 어림값의 표현이 단편적인 형태로 제시되었다. 또한, 시간을 측정하기 위하여 복잡한 체계를 이해해야 하고 시각과 시간을 표현할 때 '분, 초' 등의 단위가 동일하게 사용되는 등 학생들이 혼란을 느끼기 쉬운 부분이 존재하였다. 따라서 길이와 시간에 대한 표현의 차이를 인식하고 지도하여 학생들이 학교 수학과 실생활을 연결하고 측정 개념에 대하여 폭넓게 이해할 수 있도록 초등 수학 교과서 및 교수 학습 과정의 구성 방향을 고민할 필요가 있다.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1070-1077
• /
• 2011

This study intends to assess the defect in the weld zone of titanium grade 2 plate in terms of acoustical anisotropy based on the angle beam method. Depending on the rolling direction, the ratio of wave velocity was found to be 1.08 and the difference in the angle of refraction was more than seven degrees, confirming the presence of acoustical anisotropy. Thus for measuring the length of defect in the weld zone of the titanium plate (thickness of 10mm), the distance amplitude characteristics curves of titanium, TDACC-R and TDACC-T were constructed for the measurements in consideration of the acoustical anisotropy on CRT of the ultrasonic testing equipment. As a result, when the distance amplitude characteristics curve corresponds to the rolling direction, the length of defect was close to the actual measurement within 1mm and when different, the difference was found to be over 4mm. It was affirmed that the acoustical anisotropy should be taken into consideration when measuring the length of defects in the weld zone of the titanium plate with the presence of acoustical anisotropy.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권5호
• /
• pp.250-257
• /
• 2006

It is well known that Grain-oriented electrical steel sheets have two dimensional magnetic properties according to the direction of exciting field such as non-linear phase difference between magnetic flux density and magnetic field intensity vectors, different iron loss and permeability even when an alternating magnetic field is applied. The measurement and application of the two dimensional magnetic properties of the Grain-oriented electrical steel sheets, therefore, are very important for the design and precise performance analysis of electric machines made of them. As the direction of exciting field changes, in this paper, the two dimensional magnetic properties of a Grain-oriented electrical steel sheet, i.e., non-linear B-H curves, phase difference between B and H, and iron loss characteristics, are measured using SST(Single Sheet Tester) which has two axes excitation. The measured results are presented in two ways: using $(B,\theta_B)$ method and using hysteresis loops along rolling and transverse directions, respectively.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.66-72
• /
• 2010

Recently, the use of means of transportation of the lightweight aluminum to temper the trend is increasing. More efficient use of lightweight aluminum material to Friction stir welding has been widely attempted. Types of welding tools at the right screw to rotate anti-clockwise direction, when the tensile stress exerted on the location of the top plate to the left in the direction of the welding process to the installation was able to obtain high tensile strength. A5052 to the top of the left in the direction of the welding process to install and, when you installed the right under the A6061 was not easily come up to the top of the A5052. Conversely, at the bottom left to install on top of the A6061 and A5052 have been installed at the bottom of the upper area of the A6061 and A5052 intrude easily form the shape of the hill you can see that it was formed.