• 반도체디스플레이기술학회지
• /
• 제1권1호
• /
• pp.1-7
• /
• 2002

Modem technology depends on the reliability of extremely high precision equipments. In the production of semiconductor wafer, optical and electron microscopes, ion-beam, laser device must maintain their alignments within a sub-micrometer. This equipment requires a vibration free environment to provide its proper function. Therefore, this high technology equipments require very strict environmental vibration criteria because it is used as basic data for the design of building structure and structural dynamics of equipment. In this paper, the new approach is proposed to investigate the mismatch problem of time and frequency domain for vibration criteria of sensitive equipment. The proposed approach is based on a vibration measurement data and a relative transfer function which can be obtained by experiment or analysis.

• 복식문화연구
• /
• 제11권1호
• /
• pp.153-164
• /
• 2003

For this study, 148 female adults between the ages of 20 and 60 who satisfied the plus-size judgment criteria took part in this study. Criteria were Rohrer index is higher than 1.5, bust girth larger than 90cm, and RBW(relative body weight) index higher than 110. Using anthropometric measurement values, indirect measurement values, and index values, this study analyzed frequencies, Duncan multiple range, and ANOVA to obtain information on characteristics that determine a representative body shape, by age, 1'3r Plus-sized women. The results are as follows: Physical Characteristics of Pius-Sized Women by Their Age: Women in their 20s md 30s had broader shoulders with smaller waists, with large buttocks and thighs. Among women in their 50s and 60s, body fat level increased significantly in regions such as the chest and abdomen, which made their upper body heavier.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.968-974
• /
• 2004

Automakers have been forcing their suppliers to guarantee qualities of parts. Then, the suppliers have met the fundamental quality requirements such as dimensions and functions, but they could not sufficiently satisfy the automakers' noise requirements yet because automatic noise inspection systems were little successfully adopted In mass-production lines. This study tried to develop a system for automatically checking noise radiated from a rotating engine part and filtering parts emitting noise higher than criteria: the upper limits of a overall noise level or a noise spectrum. A commercial noise measurement system was used for measuring noise, and then the noise data was transmitted to a governing program through OLE(object, linking and embedding) functions. The governing program, belonging to a total noise inspection system managed the noise measurement and analysis. This system was successfully adapted for distinguishing bad parts according to the noise criteria.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.306-311
• /
• 2012

A reactor vessel internals comprehensive vibration assessment program (RVI CVAP) of an advanced power reactor 1400 (APR1400) is being performed as a non-prototype category-2 type of reactor based on the US Nuclear Regulatory Commission Regulatory Guide (NRC RG) 1.20. The aim of this paper is to present the results of structural response analysis and measuring locations of a upper guide structure (UGS) assembly of the APR1400 reactor. The analysis results of the UGS assembly results show that meet the specified integrity levels of the design acceptance criteria. Also, the measuring locations are set by the analysis results of the UGS assembly and selection criteria of measuring locations prior to this study. These analysis results and measuring locations will be used as fundamental materials to design a measurement system for the APR1400 RVI CVAP.

• 터널과지하공간
• /
• 제14권4호
• /
• pp.295-303
• /
• 2004

연약층과 견고한 암반층이 습곡형태로 혼재된 지질조건의 지하 심부 채굴 현장을 대상으로, 심부 급경사 연약층의 단계적 굴착 진행에 따른 갱도 및 주변 암반의 거동 양상을 전산해석과 현장계측을 통하여 비교 분석하였다. 전산해석에서는 Hoek ＆ Brown의 경험적 파괴기준 및 변형률연화모델을 적용한 탄소성 해석 기법을 이용하였다. 현장계측에서는 유압캡슐, 지중변위계, 내공변위계를 갱도 및 주변 암반에 설치하여 응력과 변위를 계측하였다. 경험적 파괴조건 및 변형률연화모델을 이용한 탄소성 해석은, 현장 지질조건 및 채굴과정의 복잡함에도 불구하고 현장계측결과와 유사한 양상을 보여주어 타당성을 검증할 수 있었다. 이러한 전산해석 및 현장계측의 비교를 통해 지하 굴착 갱도의 변형 거동 과정을 예측하고 이후의 굴착 및 지보보강 설계의 지침을 제공할 수 있을 것이다.

• Journal of the Korean Data and Information Science Society
• /
• 제26권3호
• /
• pp.773-779
• /
• 2015

We study a statistical analysis about the fifth wave data of the Korea National Health and Nutrition Examination Survey based on linear regression models with measurement errors. The data is obtained from a national population-based complex survey. To demonstrate the availability of measurement error models, two results between the general linear regression model and measurement error model are compared based on the model selection criteria which are Akaike information criterion and Bayesian information criterion. For our study, we use the simulation extrapolation algorithm for measurement error model and the jackknife method for the estimation of standard errors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.240-242
• /
• 1988

This paper proposes an improved ART (Algebraic Reconstruction technique) algorithm. This algorithm is an iterative one with iteration sequence criteria based on the discrepancy between measurement and pseudo-projection data. The simulation result using the proposed algorithm shows a significant improvement in convergency rate over the conventional ART algorithm.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.47-51
• /
• 2010

도로를 주행하는 차량들을 구분하는 차종자료는 도로 및 포장의 설계와 관리 등 여러 분야에서 기초자료로 활용되고 있다. 본 연구에서는 차종구분에 차량높이라는 분류기준을 적용하기 위해 주행하는 차량의 높이를 계측할 수 있는 방법을 고안하고 현장에 장비를 설치한 후 실험을 통해서 차량길이와 차량최고높이 자료를 획득하였다. 차량높이 측정과 동시에 동영상을 촬영하여 국토해양부 12종 차종분류에 의거하여 차종분류 기준값을 작성하였다. 영상을 통해 작성된 차종자료 기준값과 측정된 차량길이와 차량높이를 토대로 판별함수를 이용한 차종분류값을 서로 비교한 결과 88.6%의 차종정확도를 확인하였다. 이를 통해 차량높이라는 분류기준을 적용하여 차종분류에 활용할 수 있는 방안을 제시하였다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.111-115
• /
• 2001

A good business performance measurement system is an effective tool io sustained growth in profits. Although interest in creating performance measurement models is widespread, a well-designed system is rare. To be successful in today's competitive environment, a performance measurement system should incorporate strategic success factors and contain financial and non-financial measuring index to carry out strategic management. In the 1990s, Kaplan & Norton introduced a concept called the Balanced Scorecard. The Balanced Scorecard supplements traditional financial measures with criteria that measured performance from three additional perspectives - those perspectives of customers, internal business processes, and learning and growth. This paper presents five measuring index criteria for each perspective. To calculate the relative priority for These measuring index, we investigate weights investigated by interviews with management consultant. Then, AHP method is employed for calculating priority weight. Our evaluation model may be referred to as the Balanced Analytic Hierarchical Performance Model(BAHPM) in the sense that the analytic hierarchical scheme, along with the AHP, is applied. The BAHPM is the first kind of analytical model to cover a wide variety of measures. In comparison with previous evaluation models, our model shows strengths in structural flexibility, ease of incorporating feedback, group evaluation capacity, participation promotion, sensitivity analysis, and computational simplicity. A prototype based on the BAHPM can be applied to various industry sectors.

• 한국대기환경학회지
• /
• 제15권2호
• /
• pp.121-138
• /
• 1999

This study was carried out to evaluate the performance of a sampling and analytical methodology for the measurement of selected volatile organic compounds (VOCs) in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/FID and GC/MSD analysis. Target analytes were aromatic VOCs, including BTEX, 1,3,5-and 1,2,4,-trimethylbenzenes(TMBs), and naphthalene. The methodology was investigatedwith a wide range of performance criteria such as repeatability, linearity, lower detection limits, collection efficiency, thermal conditioning, breakthrough volume and calibration methods using internal and external standards. standards. Stability of samples collected on adsorbent tubes during storage was also investigated. In addition, the sampling and analytical method developed during this study was applied to real samples duplicately collected in various indoor and outdoor environments. Precisions for the duplicate samples and distributed volume samples appeared to be well comparable with the performance criteria recommended by USEPA TO-17. The audit accuracy was estimated by inter-lab comparison of both duplicate samples and standard materials between the two independent labs. The overall precision and accuracy of the method were estimated to be within 30% for major aromatic VOCs such as BTEX. This study demonstrated that the adsorbent sampling and thermal desorption method can be reliably applied for the measurement of BTEX in ppb levels frequently occurred in common indoor and ambient environments.