• 한국과학교육학회지
• /
• 제39권6호
• /
• pp.695-706
• /
• 2019

This study conducted a case study on the process-centered evaluation competency of a middle-school/high-school science teacher using Teacher's Process-centered Evaluation Competency (T-PEC) measurement tool. The case analysis shows that teacher A in a middle school represents high competency of process-centered evaluation planning and cooperative communication while the competency of utilizing process-centered evaluation results is low owing to the characteristics of non-standardized areas. Teacher B in a high school shows high level of cooperative communication competency whereas low level of process-centered evaluation execution competency because the freedom given to students is not enough during the process of evaluation. The teacher also shows very low level of utilizing process-centered evaluation results due to the lack of time and the school culture not giving feedback to the students. According to cross-case analysis, teacher A and B both represent the highest level of collaborative communication competency and the lowest level of utilization process-centered evaluation results competency. And the lack of clear criteria for process-centered evaluation leads to different understanding of process-centered evaluation between the two teachers, and teacher B shows low the level of utilizing process-centered evaluation affects results due to the students not being concerned on feedback, security problem, and the reality focusing on the university entrance examination in high schools. Based on the results, this study suggests providing clear guidelines of process-centered evaluation to teachers, introducing an application in order to solve the time-lack problem pointed out as the biggest problem of process-centered evaluation, ensuring objectivity and security about process-centered evaluation results, and building the school culture such as the expanded application of standardized areas in order to implementing process-centered evaluation.

• 한국전문물리치료학회지
• /
• 제15권2호
• /
• pp.44-53
• /
• 2008

The purpose of this preliminary study was to develop a measurement for assessing risk factors for falling in community-dwelling elderly persons. Rasch analysis and principal component analysis were performed to examine whether items on the Activities-Specific Balance Confidence (ABC), assessing self-efficacy, and items on the Berg Balance Scale (BBS), assessing balance function, contribute jointly to a unidimensional construct in the elderly. A total of 35 elderly persons (4 men, 31 women) participated. In this study, each item of ABC (16 items) and BBS (14 items) was scored on a 5-point ordinal rating scale from 0 to 4. The initial Rasch and principal component analysis indicated that 3 of the ABC items and 2 of the BBS items were misfit for this study. These 5 items were excluded from further study. After combining ABC and BBS, Rasch and principal component analyses were examined and finally 23 items selected; 12 items from ABC, 11 items from BBS. The 23 combined ABC-BBC items were arranged in order of difficulty. The hardest item was 'walk outside on icy sidewalks' and the easiest item was 'pivot transfer'. Although structural calibration of each 5 rating scale categories was not ordered, the other three essential criteria of Linacre's optimal rating scale were satisfied. Overall, the ABC-BBS showed sound item psychometric properties. Each of the 5 rating scale categories appeared to distinctly identify subjects at different ability levels. The findings of this study support that the new ABC-BBS scale measure balance function and self-efficacy. It will be a clinically useful assessment of risk factors for falling in the elderly. However, the number of subjects was too small to generalize our results. Further study is needed to develop a new assessment considering more risk factors of falling in elderly.

• 한국해양공학회지
• /
• 제24권6호
• /
• pp.71-75
• /
• 2010

Although Graphite Compacted Vermicular (GCV) was first observed in 1948, the narrow range for stable foundry production precluded the high volume application of GCV to complex components such as cylinder blocks and heads until advanced process control technologies became available. This, in turn, had to await the advent of modern measurement electronics and computer processors. Following the development of foundry techniques and manufacturing solutions, primarily initiated in Europe during the 1990s, the first series production of GCV cylinder blocks began during 1999. Today, more than 40,000 GCV cylinder blocks are produced each month for OEMs, including Audi, DAF, Ford, Hundai, MAN, Mercedes, PSA, Volkswagen, and Volvo. Given that new engine programs are typically intended to support three to four vehicle generations, the chosen engine materials must satisfy current design criteria and also provide the potential for future performance upgrades without changing the overall block architecture. With at least a 75% increase in the ultimate tensile strength, a 40% increase in the elastic modulus, and approximately double the fatigue strength of either iron or aluminum, GCV is ideally suited to meet current and future of engine design and performance requirements.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.141-146
• /
• 2005

최근 해상을 통한 선박의 교통량 증가와 선박의 디지털화로 인한 오동작으로 인해 해상에서 발생되는 사고가 증가하고 있다. 이에 따라 항해 안전에 관련하여 선박탑재용 장비에 대한 IMO(국제해사기구)의 결의에서 2002년 7월 1일 이후 건조되는 선박 선교에 대해서 SOLAS 협약에 의해 무선통신, 항해 관련기기에 대한 전자파장해 방지 및 내성의 규격을 강제 적용하고 있다. 본 논문에서는 선박의 기초적인 EMC 환경 조사의 필요성을 인지하고 선박의 EMC 환경 조사를 위해 한국해양대학교 실습선인 한바다호를 대상으로 측정하였다. 측정 장소는 실습선의 Bridge와 Engine Control Room이고 Test Point를 설정하여 측정하였다. 측정주파수 대역은 30MHz${\sim}$2GHz이고 편파 측정은 수평편파와 수직편파에 대해서 측정하였다. 측정된 결과값을 IEC에서 규정된 허용기준을 고려하여 선박의 EMC환경을 분석하였다.

• Spatial Information Research
• /
• 제17권1호
• /
• pp.103-115
• /
• 2009

최근 경제발전과 아울러 점차 확충되어가는 우리나라의 주요항만과 연안해역의 개발로 해저시설물이 점차 증가 되어가고 있다. 그러나 현재까지 실시한 측량자료와 해도를 비교 검토해보면, 상당한 차이가 발생하고 있으며, 이는 해난사고의 주요한 원인이 되고 있다. 따라서 본 연구에서는 5개 지역에 대하여 최신의 조사장비(MBES, SSS, SBP)를 이용한 해저시설물 조사수행 및 정확도 분석을 수행하였으며, 이를 바탕으로 해저시설물의 조사방법 및 정확도의 개선방안과 해양조사를 위한 정책적 고려사항을 분석하였다. 연구를 수행한 결과 인천항 작도부근에서 해저배관의 형태 및 천소수심, 목포항부근에서 침선, 평택항 부근에서 해저배관 및 천소수심, 장직로 부근에서 인공어초 및 천소수심, 제주 남부해역에서 해저분화구에 대한 보다 정확한 측량 값을 얻을 수 있었으며, 각종 해저시설물 및 장애물들을 기존 측량성과 보다 더욱더 정확하게 파악할 수 있었다. 또한 해저시설물에 대한 정보인프라 구축 방안 및 연계를 위한 방법론을 제시할 수 있었으며, 국내 사용가능 장비의 규격과 조사방법 및 절차에 대한 실험적 기준을 정립하고, 해저시설물 측량과 조사를 위한 정확도 판단 기준을 제시할 수 있었다.

• 한국의학물리학회지:의학물리
• /
• 제28권2호
• /
• pp.54-60
• /
• 2017

This study was designed to measure transit dose with an electronic portal imaging device (EPID) in eight patients treated with intensity modulated radiotherapy (IMRT), and to verify the accuracy of dose delivery to patients. The calculated dose map of the treatment planning system (TPS) was compared with the EPID based dose measured on the same plane with a gamma index method. The plan for each patient was verified prior to treatment with a diode array (MapCHECK) and portal dose image prediction (PDIP). To simulate possible patient positioning errors during treatment, outcomes were evaluated after an anthropomorphic phantom was displaced 5 and 10 mm in various directions. Based on 3%/3 mm criteria, the $mean{\pm}SD$ passing rates of MapCHECK, PDIP (pre-treatment QA) for 47 IMRT were $99.8{\pm}0.1%$, $99.0{\pm}0.7%$, and, respectively. Besides, passing rates using transit dosimetry was $90.0{\pm}1.5%$ for the same condition. Setup errors of 5 and 10 mm reduced the mean passing rates by 1.3% and 3.0% (inferior to superior), 2.2% and 4.3% (superior to inferior), 5.9% and 10.9% (left to right), and 8.9% and 16.3% (right to left), respectively. These findings suggest that the transit dose-based IMRT verification method using EPID, in which the transit dose from patients is compared with the dose map calculated from the TPS, may be useful in verifying various errors including setup and/or patient positioning error, inhomogeneity and target motions.

• 무역상무연구
• /
• 제56권
• /
• pp.3-27
• /
• 2012

The purpose of this thesis is to develop a relational model which can explain consumer selection for exporting goods and analyze the effect of corporate image on the relations between country image and consumer selection under global trade environment. The specific objectives are as follows: 1) to suggest a concept of consumer selection and measurement criteria, 2) to analyze correlations among country image, corporate image and consumer selection and 3) to find out the effect of corporate image on the relations between country image and consumer selection. The SPSS program for window and LISREL program were used to analyze the data for this study. The statistical method used in this study was the covariance structure analysis estimating parameters by maximum likelihood method. Path coefficients were tested for t-tests with a statistical significance level of .05. The conclusions of this study are as follows. First, significant correlations were observed among all sub-variables proposed in this study. In addition, significant correlations were detected among country image, consumer selection and corporate image. Second, a hypothetical model proposed in this study was mostly appropriate. Country image had a positive direct effect on consumer selection and corporate image with statistical significance. In addition, it has an indirect impact on consumer selection with statistical significance with corporate image as an intervening variable. Third, corporate image had a significant moderation effect in country image-consumer selection relations. As corporate image levels increased, the effect of country image on consumer selection increased as well. In other words, it has been confirmed that if corporate image levels are high, country image could end up with consumer selection.

• Journal of Preventive Medicine and Public Health
• /
• 제24권3호
• /
• pp.314-327
• /
• 1991

To evaluate the effects on health by exposure to mixed organic solvents, the author analyzed some labortory findings of blood (hemoglobin, hematocrit RBC, WBC, SGOT, SGPT) and urine (protein, blood, sugar) that were obtained from 722 workers (male:446, female:276) who worked in plywood, painting and shoes factories in Pusan area from January to December, 1990. The result were as follows ; 1. The mean values of each hematologic findings were all within normal limit but there were significant differences at hematocrit, RBC, WBC, SGOT in male and at WBC, SGPT in female at the comparison of the mean values and the distribution according to the normal criteria by type of work. 2. There were no differences in urinalysis(protein, blood, sugar) by type of work. 3. In stepwise multiple regression, analysis of hematologic findings on age, working duration and type of work, regression coefficients on age and type of work were relatively high in male and female sub1, respectively. As a result of this study, it is considered that the measurement of WBC with morphology is significant in hematologic findings and instead of spot urine and urinstix, 24 hours urine and quantitative analysis is required in urinalysis in screening test for healthy status of workers who deal with the organic solvents.

• 대한전자공학회논문지TC
• /
• 제48권9호
• /
• pp.73-80
• /
• 2011

전통적으로 인터넷을 통한 컨테츠 서비스는 best-effort 방식으로 이루어져, 콘텐츠 제공자에게 뚜렷하고 분석적인 수익 모델을 제시하지 못했다. 반면 품질 보장형 서비스는 새로운 수익모델을 제시해 줄 것으로 기대되지만 보장된 품질에 대한 비용 및 수익과의 관계는 여전히 연구대상이다. 최근 이슈화되고 많은 연구가 진행되고 있는 QoE는 소비자의 만족도에 대한 의견을 측정할 수 있어, 품질 보장형 서비스의 제공에 따른 수익 모델을 정립하는데 이용될 수 있다. QoE는 소비자가 만족할 수 있는 서비스를 효과적으로 제공함과 동시에, 서비스 공급자에게 소비자의 만족도를 직접적으로 확인할 수 있도록 한다. 특히, 제공되는 서비스 질에 비용을 지불할 의사가 있는지 여부에 대한 피드백은 콘텐츠 사업자에게는 대단히 중요한 요소이다. 이에 본 논문에서는 보장되는 품질에 대하여 콘텐츠 제공자가 지불해야 되는 비용 및 QoE 와 QoE에 따른 수익에 대한 모델을 설계하고 이를 분석한다. 본 논문의 연구결과는 커져가는 네트워크를 통한 콘텐츠 서비스 사업 영역에서 사업 모델을 구상하고 추진하는데 유용하게 이용될 수 있을 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.313-336
• /
• 2007

고속철도는 일반철도와는 달리 터널구간에서 여러 가지 공기역학적인 문제가 발생한다. 개활지와 비교하여 크기가 매우 작은 터널에서 고속으로 운행하는 열차는 큰 공기저항을 받게 되어 주행 안정성이 떨어지고, 터널 내의 급격한 압력변동으로 객차 내 승객의 이명감 발생, 터널출구에서의 소음공해 등 일반철도에서는 예상치 못했던 문제를 유발시킨다. 이 같은 문제점을 해결하기 위하여 본 고에서는 공기압의 특성 분석에 대하여 소개하고자 한다. 수치시뮬레이션을 통해 이명감 기준을 만족하는 최적의 단면을 검토하였다. 또한, 경부고속철도를 운행하는 열차에서 객차내 압력을 측정하였고, 화신5터널에서 터널내 압력 및 터널출구에서의 미기압을 측정하였다. 동시에 열차주행 모형실험을 수행하여 수치시뮬레이션의 입력조건으로 사용된 각종 매개변수 등의 적정성을 비교 검증하였다.