• Journal of Korean Clinical Nursing Research
• /
• v.16 no.3
• /
• pp.5-23
• /
• 2010

Purpose: This study was conducted to determine the validity and reliability of performance measurement tools based on the nursing process for prevention and management of pressure ulcers, falls and pain. Methods: The performance measurement tools were reviewed by a panel of experts and refined on the basis of the panel's suggestions. The validity of the performance measurement tools was measured by surveying hospital nurses. The reliability of these tools was tested by having nursing experts use the tools in five nursing units to assess nursing performance in prevention and management of pressure ulcers, falls and pain. Results: The performance measurement tools in this study were found to be acceptable as tools to evaluate quality of nursing care in pressure ulcers, falls and pain. The reliability of the performance measurement tools was acceptable. Conclusion: These results indicate that the performance measurement tools developed in this study are valid and reliable instruments to monitor and improve quality of nursing care in prevention and management of pressure ulcers, falls and pain.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.378-381
• /
• 2003

Efficient development of method on a performance evaluation for machine tools has been regarded as the most important work for accuracy and quality enhancement to every user and manufacturer. A evaluation method of accuracy for machine tools has been studied recently according to the rapid increase of interest in precision machine tools. To this point of view, the circular interpolation test of machine tools is recognized as the most useful method to distinguish a dynamic accuracy of NC machine tools by ISO and ANSI/ASME, etc. In this paper, we have studied and developed the form measurement system with grid encoder to analyse the final accuracy of NC machine tools. we have analyzed the servo system error and geometric error of NC machine tools through measuring a dynamic error signal by this system. and then we verified the experimental result and enhanced the reliability by means of comparing the characteristics of the developed system with the kinematic ball-bar system.

• Child Health Nursing Research
• /
• v.24 no.1
• /
• pp.78-90
• /
• 2018

Purpose: The purpose of this study was to evaluate measurement properties of self-report questionnaires measuring the social adjustment for youth after treatment of childhood cancer. Methods: Social adjustment measurement tools were identified through a two-stage systematic review. First, we searched for articles using self-report questionnaires to measure the social adjustment of youth after the treatment of childhood cancer. The appropriate tools were listed and categorized. Second, using methodological filters, we searched 5 electronic databases for articles examining the measurement properties of the tools when used with youth after the treatment of childhood cancer. The quality of these papers was then evaluated using the COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) checklist. Results: Eight tools were frequently used to measure social adjustment. Eight studies investigated the measurement properties of 4 of these tools. The PedsQL 4.0 and MMQL-AF had moderate to strong evidence in some domains, but the rest of the domains had a lack of evidence. The SF-36 and KIDSCREEN-27 were validated for only a few areas. Conclusion: We found a lack of evidence regarding the measurement properties of these tools. More research is required on the measurement properties of tools for use in this population.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.107-113
• /
• 2013

When the main spindle of high precision machine tools are run many hours, heat is generated in bearing parts of the inside of the spindle. Also, headstock is appeared distortion by inside and outside temperature difference of a machine. This paper studies method to measure behavior of machine tool about these thermal effects. In addition, it estimates measurement uncertainty factors which can be appeared in thermal effects measurement. Finding the factor of thermal affect measurement is important for estimation of measurement uncertainty. This paper measures thermal effects of high precision machine tools and evaluates the important factors of uncertainty.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.496-501
• /
• 2015

In this study, calibration procedure of power assembly tools is suggested and methods are developed for calculating measurement uncertainty. Fist of all, the calibration of joint simulator bench (JSB) was carried out for maintaining traceability and the uncertainty components of JSB were analyzed. The influences of tool speed, tolerance, temperature and length of the adapter were examined by the torque measurement values through experiments. From this research, credibility for calibration results could be enhanced. This experimental results, being used as an effective tool for calibration of power assembly tools, will provide and improve the accuracy of the use of the power assembly tools.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.15-21
• /
• 1997

This paper presented a linear motion accuracy by using two-dimensional probe with the master block and the square for NC machine tools. This measuring system could be measured motion error due to numerical control system. The results of measurement and simulation for motion error were similar, and so, this system had enough accuracy to measure a linear motion accuracy for NC machine tools. The experimental results are as follows. 1. This measuring system could be measured motion error due to mumerical control system. 2. The results of measurement and simulation for motion error were similar. 3. This measuring system had enough accuracy to measure a linear motion accuracy for NC machine tools.

• Journal of The Korean Association For Science Education
• /
• v.37 no.6
• /
• pp.1051-1061
• /
• 2017

An image is a comprehensive result that you have experienced about an object and means the image that you have on the surface of your consciousness. The image of the subject has an important influence on learning the subject. The image analysis of the subjects that the learners have will be good data to decide the direction of teaching and learning. The purpose of this study is to develop and apply measurement tools for physics image and discuss its educational implications. The research method is to develop the measurement tools for the physics image by semantic analysis method and apply it to the secondary pre-service physics teacher. The subjects of the study were 39 first graders, 31 second graders, 37 third graders, and 38 fourth graders at the University of Education, a total of 145 students, 82 of whom were male and 63 were female. The study results show that the image measurement tools for physics consisted of 25 items from five elements: 'interest,' 'feeling,' 'scope,' 'evaluation,' and 'viewpoint.' There were statistically significant differences between the male and female students in applying the measurement tools developed for the physics image of secondary pre-service physics teachers. Male students showed significantly higher statistical significance than female students in the 'interest' and 'feeling' elements of measurement tools for the physics image. In the 'scope' element of measurement tools for the physics image the second grade was statistically higher than the fourth grade. Finally, we discussed educational implications for image analysis of physics and the usefulness of using measurement tools in physics image.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.120-128
• /
• 2000

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. This paper models of the thermal errors for error analysis and develops on-the-machine measurement system by which the volumetric error are measured and compensated. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses and a designed spherical ball artifact (SBA). Experiments, performed with the developed measurement system, show that the system provides a high measuring accuracy, with repeatability of $\pm$2${\mu}{\textrm}{m}$ in X, Y and Z directions. It is believed that the developed measurement system can be also applied to the machine tools with CNC controller. In addition, machining accuracy and product quality can be improved by using the developed measurement system when the spherical ball artifact is mounted on the modular fixture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.467-468
• /
• 2010

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.9
• /
• pp.149-156
• /
• 2016

This paper is concerned with education courses operating practices for basic computer literacy training. In this study, we propose an example for students to effectively measure and evaluate the achievement of defined ability in the performance measurement and analysis, learning objectives and learning outcomes set in operation throughout the course. Through research and development use case presents the tools for teaching method and effective and objective measurement of the related subjects. And based on the results, we propose the possibility of utilizing NCS-based course operation and education certification. In this study, the measurement process is based on the association with the objective of the development and operation, and measurement tools, measuring tools for measuring learning outcomes associated with the curriculum design methods for the measurement and evaluation of the case of the operation of the course units of learning outcomes and the method proposed.