• IE interfaces
• /
• v.18 no.4
• /
• pp.444-453
• /
• 2005

The purpose of the Gage R&R study is to determine whether a measurement system is adequate for monitoring a process. If the measurement system variation is small relative to the process variation, then the measurement system is deemed "adequate". The sources of variation associated with the measurement system are compared using an analysis of variance (ANOVA) model, in general. A typical ANOVA model used in a standard Gage R&R study is the two-factor random effect model. Then, the ANOVA partitions the total variation into three categories: repeatability, reproducibility, part variation. However, if the process variation possesses the between group variation, within group variation, and within part variation, these variations can cause the measurement system evaluation to provide misleading results. That is, in the standard Gage R&R study these variations affect the estimate of repeatability, reproducibility, or both. This paper presents a four-factor nested factorial ANOVA model which explicitly considers these variations for the Gage R&R study. The variance component estimators are derived by setting the EMS equations equal to the corresponding mean square from the ANOVA table and solving. And the proposed model is compared with the standard Gage R&R model.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.719-737
• /
• 2015

Full scale measurement on the structural dynamic characteristics and Vortex-induced Vibrations (VIV) of a long-span suspension bridge with a central span of 1650 m were conducted. Different Finite Element (FE) modeling principles for the separated twin-box girder were compared and evaluated with the field vibration test results, and the double-spine model was determined to be the best simulation model, but certain modification still needs to be made which will affect the basic modeling parameters and the dynamic response prediction values of corresponding wind tunnel tests. Based on the FE modal analysis results, small-scaled and large-scaled sectional model tests were both carried out to investigate the VIV responses, and probable Reynolds Number effects or scale effect on VIV responses were presented. Based on the observed VIV modes in the field measurement, the VIV results obtained from sectional model tests were converted into those of the three-dimensional (3D) full-scale bridge and subsequently compared with field measurement results. It is indicated that the large-scaled sectional model test can probably provide a reasonable and effective prediction on VIV response.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.1
• /
• pp.118-123
• /
• 2015

There have been various studies on measurements of flood risk and forecasting models. For river and dam region, PDF and FVI has been proposed for measurement of flood risk and regression models have been applied for forecasting model. For Bo region unlikely river or dam region, flood risk would unexpectedly increase due to outgoing water to keep water amount under the designated risk level even the drain system could hardly manage the water amount. GFI and general linear model was proposed for flood risk measurement and forecasting model. In this paper, FVI with the consideration of duration on GFI was proposed for flood risk measurement at Bo region. General linear model was applied to the empirical data from Bo region of Nadong river to derive the forecasting model of FVI at three different values of Base High Level, 2m, 2.5m and 3m. The significant predictor variables on the target variable, FVI were as follows: ground water level based on sea level with negative effect, difference between ground altitude of ground water and river level with negative effect, and difference between ground water level and river level after Bo water being filled with positive sign for quantitative variables. And for qualitative variable, effective soil depth and ground soil type were significant for FVI.

• International Journal of Quality Innovation
• /
• v.4 no.2
• /
• pp.101-122
• /
• 2003

With the development of the American Customer satisfaction index (ACSI), research on customer satisfaction measurement or evaluation methods have become significant in the last decade. Most of international customer satisfaction barometers or indices are evolved based on the cause and effect relationship model of ACSI. Of critical importance to validity of customer satisfaction indices is how to construct a measurement attribute or indicator model and provide an effective implementation method effectively. Quality Function Deployment (QFD) is a very useful tool for translating the customer voice into product design through quality engineering. In fact, this is a methodology for measuring and analyzing evaluation indicators by their relationship matrix. In this paper, we will make an effort to integrate the framework of QFD into the measurement problem of customer satisfaction, and also develop a new multi-phase QFD model for evaluation of Customer Satisfaction Index (CSI). From the houses of quality in this model, the evaluation indicators impacting on customer's global satisfaction are identified by means of their relationship matrix. Then the evaluation indicator hierarchy and its measurement method for the customer satisfaction index are presented graphically. Furthermore, survey data from the Chinese automobile maintenance sector and a relevant case study are utilized to show the implementation method of the QFD model used to measure and analyze of customer satisfaction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.305-325
• /
• 2014

In cloud computing infrastructure, current virtual machine trust measurement methods have many shortcomings in dynamism, security and concurrency. In this paper, we present a new method to measure the trust of virtual machine. Firstly, we propose "behavior trace" to describe the state of virtual machine. Behavior trace is a sequence of behaviors. The measurement of behavior trace is conducted on the basis of anticipated trusted behavior, which not only ensures security of the virtual machine during runtime stage but also reduces complexity of the trust measurement. Based on the behavior trace, we present a Dynamic Tree Style Trust Measurement Model (DTSTM). In this model, the measurement of system domain and user domain is separated, which enhances the extensibility, security and concurrency of the measurement. Finally, based on System Call Interceptor (SCI) and Virtual Machine Introspection (VMI) technology, we implement a DTSTM prototype system for virtual machine trust measurement. Experimental results demonstrate that the system can effectively verify the trust of virtual machine and requires a relatively low performance overhead.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.114-120
• /
• 2000

Fossil power plant availability is significantly affected by gradual degradations of equipment as operation of the plant continues. It is quite important to determine whether or not to replace some equipment and when to replace the equipment. Performance calculation and analysis can provide the information. Robustness in the performance calculation can be increased by using verification ＆ validation of measured input data. We suggest new algorithm in which estimation relation for validated measurement can be obtained using correlation between measurements. Input estimation model is obtained using design data and acceptance measurement data of domestic 16 fossil power plant. The model consists of finding mostly correlated state variable in plant state and mapping relation based on the model and current state of power plant.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.3
• /
• pp.8-13
• /
• 2008

The paper proposes a model-based measurement of unsteady flow rate by using distributed parameter pipeline model and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-diagnostics functions of the measurement method, the validity is investigated by comparison with the measured and estimated pressure and flow rate wave forms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate wave forms and theoretical those under unsteady laminar flow conditions. The method proposed here is useful in estimating unsteady flow rate through an arbitrary cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.845-851
• /
• 2012

Power system loads have a significant impact on a system. Although it is difficult to precisely describe loads in a mathematical model, accurately modeling them is important for a system analysis. The traditional load modeling method is based on the load components of a bus. Recently, the load modeling method based on measurements from a system has been introduced and developed by researchers. The two major components of a load modeling problem are determining the mathematical model for the target system and estimating the parameters of the determined model. We use the composite load model, which has both static and dynamic load characteristics. The ZIP model and the induction motor model are used for the static and dynamic load models, respectively. In this work, we propose the measurement-based parameter estimation method for the composite load model. The test system and related measurements are obtained using transient security assessment tool(TSAT) simulation program and PSS/E. The parameter estimation is then verified using these measurements. Cases are tested and verified using the sample system and its related measurements.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.172-181
• /
• 1999

The objective of this research is to develop a measurement error model for sculptured surfaces in On-Machine Measurement (OMM) process based on a closed-loop configuration. The geometric error model of each axis of a vertical CNC Machining center is derived using a 4${\times}$4 homogeneous transformation matrix. The ideal locations of a touch-type probe for the scupltured surface measurement are calculated from the parametric surface representation and X-, Y- directional geometric errors of the machine. Also, the actual coordinates of the probe are calculated by considering the pre-travel variation of a probe and Z-directional geometric errors. Then, the step-by-step measurement error analysis method is suggested based on a closed-loop configuration of the machining center including workpiece and probe errors. The simulation study shows the simplicity and effectiveness of the proposed error modeling strategy.

• Journal of Information Management
• /
• v.41 no.3
• /
• pp.45-66
• /
• 2010

The purpose of this study is to develop service quality measurement model(DL-SQI model) which are able to measure objectively service quality of digital libraries in Korea and to measure user perceived service quality performance with DL-SQI model. This study also investigates the influence of service quality on customer satisfaction and customer loyalty. Before measurement, two principal rules and indicator formula were made to measure the service quality. Finally service quality of three digital libraries selected as samples was measured and analyzed in various points of view. It was developed a DL-SQI Consequences Model and testified it through path analysis using structural equation model.