• 제목/요약/키워드: Measurement Algorithm

검색결과 2,900건 처리시간 0.034초

GSM 신호 측정기의 소프트웨어 구현 (Software Implementation of GSM Signal Measurements)

  • 홍대기;강성진
    • 한국산학기술학회논문지
    • /
    • 제10권9호
    • /
    • pp.2369-2378
    • /
    • 2009
  • 본 논문에서는 GSM (Global System for Mobile Communication) 단말의 성능을 측정하기 위한 측정기의 기능을 소프트웨어로 구현하고 GSM 신호 발생기를 통해 발생된 신호를 이용해 구현된 소프트웨어 측정기의 성능을 평가해본다. 일반적으로 통신신호 측정기는 매우 정밀한 정확도를 필요로 하므로 정확도가 충분히 높지 않은 일반 통신 모뎀 수준의 수신 알고리듬을 직접적으로 측정기에 적용할 수는 없다. 본 논문에서는 GSM 신호의 정밀한 측정을 위한 새로운 GSM 신호의 수신 알고리듬을 제안한다. 제안된 GSM 수신 알고리듬에는 2단계(개략적 단계, 미세 단계)의 파라미터(심볼 타이밍, 주파수 오프셋, 반송파 위상) 추정방식을 사용하였다. 또한 수신신호의 보간을 이용하여 수신 신호 샘플의 개수를 증가시킴으로서 측정의 정확도를 향상시켰다. 본 논문에서 제안된 GSM 신호 측정 방식은 하드웨어를 구현하기 전에 소프트웨어를 이용하여 사전에 측정 성능을 검증하는데 사용될 수 있다. 또한 구현된 소프트웨어 알고리듬을 속도측면에서 최적화함으로서 직접 GSM 신호 측정을 위한 상용 시스템으로도 이용할 수 있다.

체커보드 종류 및 촬영조건에 따른 OpenCV 기반 길이측정 알고리즘 정확도 분석 (Evaluating the Accuracy of an OpenCV-Based Length Measurement Algorithm: The Impact of Checkerboard Type and Capturing Conditions)

  • 김현민;권우빈;김하림;김형준;송승호;조훈희
    • 한국건축시공학회지
    • /
    • 제24권1호
    • /
    • pp.133-144
    • /
    • 2024
  • OpenCV 기반 길이측정 알고리즘은 길이측정 검측업무를 보조함과 동시에 객관적인 검측결과를 제시할 수 있을 것으로 판돤된다, 그러나, 건설현장 내에서 체커보드의 유형과 촬영조건이 해당 알고리즘의 정확도에 어떠한 영향을 미치는지에 대한 연구는 미흡한 실정이다. 이에 본 연구에서는 디지털 기술을 활용한 검측업무 수행에 적합한 체커보드와 촬영방법을 제시하고자 OpenCV 기반 길이측정 알고리즘 정확도 측정 실험을 수행하였다. 실험결과 OpenCV 기반 길이측정 알고리즘을 통한 검측업무 시 촬영거리 4m 이내, 촬영각도 90°의 조건 하, 체커보드 크기와 Square size를 각각 A4 이상, 50mm 이상으로 설정하는 것이 적절할 것으로 판단된다. 본 연구의 결과는 디지털 기술을 통한 길이측정 검측업무 수행 시 가이드라인으로 활용될 수 있을 것으로 사료된다.

WCDMA 단말 모뎀을 위한 개선된 SIR 측정 알고리즘 설계 (Design of an enhanced SIR measurement algorithm for WCDMA mobile station Modem)

  • 한정수;도주현;최형진
    • 한국통신학회논문지
    • /
    • 제30권2A호
    • /
    • pp.51-60
    • /
    • 2005
  • 본 논문에서는 WCDMA(Wideband Code Division Multiple Access) 단말 모뎀을 위한 개선된 SIR 측정 알고리즘을 제안한다. 제안된 알고리즘은 속도 적응형 IIR 타입의 channel estimator를 적용함으로써 DPCH(Dedicated Physical Channel)의 채널 보상으로 인한 처리 지연을 최소화하였으며, 파일럿 채널인 CPICH(Common Pilot Channel)를 사용하여 페이딩 채널 환경에서 발생하는 신호 전력 감쇄를 보상함으로써 페이딩 환경에서 SIR 측정시 발생하는 SIR 측정 오차를 대폭 감소시켰다. 또한 fading의 변화를 적절히 반영할 수 있도록 IIR 필터를 신호 전력 및 간섭 전력 측정 시에 추가함으로써 SIR 측정에 대한 안정도를 향상시켰다. 제안된 알고리즘과 기존의 SIR 측정 알고리즘과의 성능 비교를 통하여 무선 이동 채널, 특히 고속 이동체 환경에서 제안된 알고리즘의 측정된 SIR의 mean은 최대 약 8dB, jitter는 약 2dB의 향상된 우수한 성능을 보임을 입증하였다.

머신 비전을 이용한 ALC 블록 생산공정의 자동 측정 시스템 개발 (Development of Automatic ALC Block Measurement System Using Machine Vision)

  • 엄주진;허경무
    • 제어로봇시스템학회논문지
    • /
    • 제10권6호
    • /
    • pp.494-500
    • /
    • 2004
  • This paper presents a machine vision system, which inspects the measurement of the ALC block on a real-time basis in the production process. The automatic measurement system was established with a CCD camera, an image grabber, and a personal computer without using assembled measurement equipment. Images obtained by this system was processed by an algorithm, specially designed for an enhanced measurement accuracy. For the realization of the proposed algorithm, a preprocessing method that can be applied to overcome uneven lighting environment, boundary decision method, unit length decision method in uneven condition with rocking objects, and a projection of region using pixel summation are developed. From our experimental results, we could find that the required measurement accuracy specification is sufficiently satisfied by using the proposed method.

전력시스템 고조파 상태추정알고리즘 개발 (Algorithm of Harmonic State Estimation for Power Systems)

  • 왕용필;정형환;정종원;한형주;곽노홍;전영수;박상호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
    • /
    • pp.149-150
    • /
    • 2006
  • The design of a measurement system to perform Harmonic State Estimation (HSE) is a very complex problem. In particular, the number of harmonic instruments available is always limited. Therefore, a systematic procedure is needed to design the optimal placement of measurement points. This paper presents a new HSE algorithm which is based on an optimal placement of measurement points using Intelligent Algorithms (IAs). This HSE has been applied to the Simulation Test Power System for the validation of the new HSE algorithm. The study results have indicated an economical and effective method for optimal placement of measurement points using Intelligent Algorithms (IAs) in the Harmonic State Estimation(HSE).

  • PDF

A Robust Algorithm for Roughness Laser Measurement based on Light Power Regulation against Specimen Changes

  • Seo Young Ho;Ahn Jung Hwan
    • Journal of Mechanical Science and Technology
    • /
    • 제19권5호
    • /
    • pp.1131-1137
    • /
    • 2005
  • Methods for measuring surface roughness based on light reflectivity have advantages over methods based on light interference or diffraction, especially in in-situ, on-the-machine and in-process applications. However, measurement inconsistencies caused by changes in the specimen are still a drawback for field applications. In this study, we propose a new feedback-based algorithm to enhance the consistency against changes in the specimen. The algorithm is deduced from simulations based on light reflectance theory with typical modeled surfaces. The proposed method is similar to a digital controller and regulates the power of reflected light. Experiments varying heights and materials, verified the improvements in robustness of the method against measurement disturbances caused by specimen changes.

동적 저울의 진동응답 측정에 의한 질량 추정 알고리즘 (Mass-estimation Algorithm by Vibration Response Measurement of Dynamic Balance)

  • 김병삼
    • 한국음향학회지
    • /
    • 제19권5호
    • /
    • pp.71-78
    • /
    • 2000
  • Quickness and precision are the two most important requirements for an industrial scale used in production lines. In this paper, a new approach, "Mass-estimation algorithm by vibration-response measurement of dynamic balance", is presented to improve some of drawbacks in conventional scales. The system, consisted of velocity and displacement sensors, spring scale, analog-digital converter and microcomputer, is based on full utilization of dynamic mass measurement of velocity and displacement via microcomputer-assisted real time monitoring. The resulting system, when combined with appropriate mass estimation algorithm software, has shown its effectiveness in terms of two desirable characteristics required.

  • PDF

전력시스템 고조파 상태추정 지능형 알고리즘 개발 (Intelligent Algorithm of Harmonic State Estimation for Power System)

  • 왕용필;이현정;정형환;김상효;박회철;정동일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 A
    • /
    • pp.286-288
    • /
    • 2004
  • The design of a measurement system to perform Harmonic State Estimation (HSE) is a very complex problem. In particular, the number of harmonic instruments available is always limited. Therefore, a systematic procedure is needed to design the optimal placement of measurement points. This paper presents a new HSE algorithm which is based on an optimal placement of measurement points using Genetic Algorithms (GAs). This HSE has been applied to the Simulation Test Power System for the validation of the new HSE algorithm. The study results have indicated an economical and effective method for optimal placement of measurement points using Genetic Algorithms (GAs) in the Harmonic State Estimation (HSE).

  • PDF

24시간 HOLTER ECG에서 QT interval 분석을 위한 새로운 Algorithm에 관한 연구 (A New algorithm for at interval analysis in 24 hour Holter BCG)

  • 윤형로;이윤선;이경중
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1989년도 춘계학술대회
    • /
    • pp.13-14
    • /
    • 1989
  • Prolongation in QT corrected interval (QTc), measured in surface ECG, has been shown in the majority af patients to be marker of bad prognosis in postmyocardial infarction patients (PMIP). Hence it would seem logical that dynamic QTc interval measurement can be a very usefull indicator to stratify prognosis in PMIP. We present a new algorithm for QT as well as for QTP (distance value from Q wave onset to T wave peak) intervals measurement in 24 hour ECG Holter tapes. Validation of the algorithm by hand measurement has been done on first beats of 18 Holter tapes, resulting in a magnitude of deviations between 10 and 15 ms. Application on 24 hour Holter ECG signal has also been done.

  • PDF

영상처리기법을 이용한 그린시트 측정알고리즘 개발 (Development of Green-Sheet Measurement Algorithm by Image Processing Technique)

  • 표창률;양상모;강성훈;윤성만
    • 소성∙가공
    • /
    • 제16권4호
    • /
    • pp.313-316
    • /
    • 2007
  • The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Co-fired Ceramic(LTCC) technology can be employed to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and/or resistive pastes on. These single green-sheets must be laminated together and fired at the same time. Main function of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used. In order to measure the entire film area using several scanning steps, an overlapping method is used.