• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1038-1042
• /
• 2003

In order to evaluate dynamic impedance of a hand-arm system it is necessary to measure the hand-transmitted vibration and the reaction force at the same time while gripping the vibrating handle. In the study a device was developed to measure both the vibration and the force. The device consists of a measurement handle with four strain gauge and two accelerometers and a PC based control system with a program for the signal processing and evaluation of the hand-transmitted vibration and reaction force. The handle was installed on the vibration shaker so that it can move by the generated signal from the control system. As an application of the system dynamic reaction force and the frequency weighted acceleration at the handle attached to the shaker were measured at various grip force and feed force. This system will be very useful in the area of impedance measurement and the evaluation of performance of anti-vibration gloves.

• 소성∙가공
• /
• 제16권4호
• /
• pp.313-316
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Co-fired Ceramic(LTCC) technology can be employed to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and/or resistive pastes on. These single green-sheets must be laminated together and fired at the same time. Main function of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used. In order to measure the entire film area using several scanning steps, an overlapping method is used.

• 센서학회지
• /
• 제7권3호
• /
• pp.203-210
• /
• 1998

An experimental study of an eddy current nondestructive testing system to measure dimensions of cylindrical metallic rods, such as cross-sectional area or diameter, is presented. Impedance characteristics of a solenoid sensor, which are generally based on Maxwell's equations in electromagnetic field, are briefly discussed for inspecting geometrical parameters of the coil sensor and testing materials. A measurement system for detecting the diameter of the metallic rod is implemented. This instrument has capabilities for detecting the sensor output signals and estimating demensions of the testing material, continuously. As a result, it was shown that the eddy current sensor with an encircling coil could estimate the diameter of metallic rod. The implemented measurement system gives accurate information for inspecting the dimension of conducting rod with good sensitivity.

• 화약ㆍ발파
• /
• 제9권4호
• /
• pp.13-21
• /
• 1991

This study is concerned with the disasters that occure in the field of industrial explosives and analyzed by two side the disaster of the manufacturing factory and that of the field, and is studied about the safety and the countermeasure. The industrial explosives accidents occure just accidentaly and unforeseeable, and reappearance experiments are more difficult. The 3E of J.H. Harvey was applied in this study to establish the counter measure of preventation of accidents, overcoming these restricted factores. As a method of technical safety countermeasures. The blasting vibration formula which had been conformed from the Seoul Subway Construction work during 1980-1984 year, was uilized, and, using the formula $V=Kw^{0.5}D^{-1.5}$ for the gneiss which is widely distributed in Pusan area, an index of the minimum and maximum amount of gun powder, to be used according to safety distance was made, and it helped the gun powder managing technician's practical business. During the fore work discharging, the safety distances of felling were theoretically established based on the writer ${\diagdown}s$ experiences of more than 10 years on this field.

• 한국산업정보학회논문지
• /
• 제6권4호
• /
• pp.22-29
• /
• 2001

소프트웨어의 품질 측정의 중요성이 커짐에 따라 새로운 소프트웨어 척도를 개발하기 위한 수많은 노력이 나타났다. 객체 지향 개발 방법론의 중요성에서 볼 때 이러한 경향이 나타나는 특별한 분야는 객체 지향 시스템의 결합도 측정이다. 본 논문에서는 객체 지향 시스템의 결합도를 측정하기 위해 메소드에 의한 응집도 COM과, 클래스에 의한 결합 COC를 제안하였다. 그리고 이를 Briand가 제안한 결합도 성질을 이용하여 평가하고, C++ 언어로 작성된 시스템에 적용하여 다른 결합도 척도와 비교하였다.

• 한국분무공학회지
• /
• 제7권3호
• /
• pp.31-37
• /
• 2002

In previous study, diesel-methanol stratified injection system is manufactured and applied to a D.I. diesel engine in order to realize combustion improvement using methanol, which is oxygenated fuel with large latent heat. We know that NOx and soot is reduced by stratified injection of diesel fuel-methanol. Therefore, in the present study, combustion diagnosis using optical measurement is tried to make clear effect of methanol on simultaneous reduction of NOx and soot. Two-color method is used to measure flame temperature and KL value, which is approximately proportional to the soot consentration along the optical path. Laser induced scattering method was used to measure distribution of soot at two dimensional area. Also, it is compared exhaust characteristics of NOx and soot with results of optical measurement.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 가을 학술발표회 논문집
• /
• pp.133-145
• /
• 2001

This paper presents quality and measure controls of Plastic Board Drains(PBD) for improvement of soft ground. Laboratory and field tests has been carried out to evaluate the quality of PBD focussing on : discharge capacity of flow area; permeability of filter sleeve; migration of fine particles; deformed shape of PBD; consolidation of clay in the close vicinity of PBD; tensile strength of PBD; long-term consolidation behavior of clay-PBD. Test results show that the quality of PBD is sufficient to perform the improvement of soft silty and clayey ground. But, geotechnical engineer must make efforts minimizings of PBD damage and ground disturbance, continuity of drainage system during construction. Adequate monitoring system should apply at ground focussing on number, location, and accuracy of geotechnical instrumentation, measurement and evaluation of data for ground behaviour.

• 산업경영시스템학회지
• /
• 제34권4호
• /
• pp.42-48
• /
• 2011

This paper proposes performance measurement method of quality small-group activity in business. This paper collects and analyzes quality circle activities data respect to tangible and intangible effect in national quality circles competitions festival. This paper proposes QPI (quality-circle performance index) based on Balanced Scorecard for quality small-group activity in quality improvement area. QPI is to measure the performance of quality improvement activities in the business firms. QPI is able to use widely in industries to provide a performance measure of quality small-group activity. In this paper, we propose the application method of QPl.

• 한국조경학회지
• /
• 제26권3호
• /
• pp.189-198
• /
• 1998

This study explored the effects of expectatioin, performance, and disconfirmatoni on satisfaction of theme park users. Everland was chosen as the study area, and 260 users were selected by the nonprobability sampling. In expectation disconfirmation paradigm, expectation should be measured before purchase, and performance, disconfirmation and satisfaction should be measured after purchase. An entrance survey was done to measure expectation, and an exit survey to measure performance, disconfirmation, and satisfaction. Maximum likelihood method was used to estimate structural equation model by the LISREL 7.2. Performance had the most significant effect on satisfaction among three variables. The satisfaction of theme park users depends largely on it, therefore, the consideration of visitors' performance should e essential for managers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.28-30
• /
• 2002

The PD in GIS leads to a charge transfer and a voltage drop across the discharge area. They cannot be measure directly but we can measure electromagnetic wave made by PD. In generally, compared with VHF band, electromagnetic waves of UHF band have a low noise therefore, we can detect the real defect with several pC in GIS using UHF method. In this paper, the U-slot microstrip patch antenna for measuring PD signal in GIS is presented. the proposed UHF sensor are designed to have large band characteristics and unaffected structure for GIS operation.