• Title/Summary/Keyword: Means of Compliance

Search Result 138, Processing Time 0.022 seconds

Dynamic Lung Compliance in Normal Subjects Measured by Pneumatograph (Pneumotachograph 로 측정한 건강인의 동적 폐 Compliance)

  • 이성행
    • Journal of Chest Surgery
    • /
    • v.10 no.2
    • /
    • pp.195-204
    • /
    • 1977
  • Dynamic lung compliance was measured in healthy ten young[mean age, 26 years] male and five young[mean age, 25 years] female. Lung volume was integrated of the rate of flow signal which was obtained by using pneumotachograph and differential pressure transducer[PM 5, Statham]. Intrapleural pressure was measured as that of intraesophagel pressure. Esophageal ballon, 15. 5cm in length, 4ml of luminal capacity and made of thin latex, was connected to the polyethylene tube that had 12-14 side holes and was of 1.5mm of ID. Transpulmonary pressure was traced by means of differential pressure transducer[PM 131, Statham] to which connected the esophageal balloon catheter and connection tube from mouth piece. Lung volume and transpulmonary pressure were photographed by cathode ray oscilloscope camera while the subjects were breathing spontaneously. Dynamic lung compliance loop was displayed on single trace monitor and subtraction was performed for the quasi-static hysteresis. Dynamic lung compliance was measured, 1. by plotting the pressure-volume relationship 2. from the subtracted pressure-volume loop. Results were as follows. 1. Dynamic lung compliances measured by plotting of healthy young male and female were $0.202{\pm}0.06$ and $0.190{\pm}0.023L/cm$ $H_2O$ respectively. 2. When measured from subtraction loop, dynamic lung compliance for male and female were $0.327{\pm}0.107$, and $0.27{\pm}0.06L/cm$ $H_2O$ respectively. 3. Dynamic chest wall and total respiratory system compliance were also measured. 4. Dynamic lung compliance by plotting appeared to be essentially same when compared to that of static compliance reported previously from our laboratory, however, that obtained from subtraction loop revealed higher values than the compliances obtained by plotting and that of static compliance.

  • PDF

Effects of Self-efficacy and Transplant-related Knowledge on Compliance with a Therapeutic Regimen for Recipients of Liver Transplant (간이식 수혜자의 자기효능감과 이식 관련 지식이 치료지시이행에 미치는 영향)

  • Moon, So Jung;Kim, Hyun-Ju
    • Journal of Korean Academy of Fundamentals of Nursing
    • /
    • v.26 no.3
    • /
    • pp.166-175
    • /
    • 2019
  • Purpose: This study was done to investigate the degree of self-efficacy, transplant-related knowledge, and other factors affecting compliance with a therapeutic regimen for liver transplant recipients. Methods: Participants were 140 patients who had received a liver transplant at a tertiary hospital in Y City, Gyeongnam Province and made regular hospital visits as outpatients. A self-report questionnaire was used to collect the data and collection was done from December 4, 2017 to January 26, 2018. Data were analyzed using frequencies, percentages, means, and standard deviations, and t-test, ANOVA, Pearson's correlation coefficients. Multiple linear regression was performed using SPSS/WIN 21.0 program. Results: Participants scored $113.29{\pm}20.95$ (out of 150) on self-efficacy, $16.38{\pm}3.62$ (out of 18) on transplant-related knowledge, and $148.30{\pm}31.06$ (out of 200) on compliance with the therapeutic regimen. Analyzed of correlations among participant's self-efficacy, transplant-related knowledge, and compliance with the therapeutic regimen showed a significant positive correlation between self-efficacy and compliance with the therapeutic regimen (r=.64, p=.001), but no significant correlations were found between self-efficacy and transplant-related knowledge (r=-.01, p=.912) or between transplant-related knowledge and compliance with the therapeutic regimen (r=.06, p=.458). Multiple regression analysis showed that factors affecting compliance with the therapeutic regimen were state of re-transplantation (${\beta}=.17$, p=.016) and self-efficacy (${\beta}=.53$, p=.001). Conclusion: There is a need to apply a differentiated nursing intervention program considering the differences in patients' self-efficacy, transplant-related knowledge, and compliance with the therapeutic regimen.

Intrinsic and Extrinsic Factors Impacting Individuals' Cyber Ethics Awareness and Behavior Intention (사이버윤리 준수인식과 행동의도에 영향을 미치는 사용자의 내·외적요인)

  • Kim, Sanghyun;Park, Hyunsun
    • The Journal of Information Systems
    • /
    • v.23 no.1
    • /
    • pp.111-138
    • /
    • 2014
  • As the Internet is widely used worldwide, Cyber world has become a part of daily life. On the other hand, the adverse effects of Internet, such as abusive comments, illegal harmful contents, rumor diffusion, infringement on a right have emerged with the increase. Researchers recognized the important of cyber ethics as an effective means of coping with the adverse effects on Internet. But, Little empirical research has been related to cyber ethics in management information systems. Thus, the purpose of this research is to identify multidimensional motivation factors that cyber ethics awareness and compliance behavior Intention. For this, this study investigated the factors that might influence Internet users to compliance cyber ethics. Using university students as a sample, one hundred and ninety six are collected for further analysis. The results of this study are as follows; First, self-esteem, Moral Obligation, self-control, cyber ethics education and Social Influence are significantly related to cyber ethics awareness, while punishment is not significantly related. Second, cyber ethics awareness have a positive effect on cyber ethics compliance behavior Intention. Third, the moderating effect of ego strength is also significant. This study is significant in that it established a behavior model to understand the compliance of cyber ethics with internet user in Korea.

Research of Part 23 Level Aircraft Engine Certificate Flight Test Procedure (Part 23 급 항공기 엔진인증 비행시험 절차 조사)

  • Ryoo, Seung-Hyun;Park, Young-Hoon;Moon, Hee-Jang
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.25 no.1
    • /
    • pp.35-39
    • /
    • 2017
  • The engine is the most significant and essential part of the aircraft. As a result, systematical handling in the aircraft development stage is required from engine design to implementation to the full-scale airframe. This survey demonstrates the procedures demanded by the KAS 23 Civil Aircraft to acquire the engine Type Certification and the flight test procedures for ensuring the operational stability. Surveys were conducted on domestic and international aircraft engine certifications, technical regulations and documentations related to the Means of Compliance for flight test development stage. In addition, organized reference items that should be considered for the certification of engine flight test procedures were reviewed based on the KC-100.

A study on the regulation and means of compliance for the ozone concentration in the cabin (항공기 객실 내 오존농도의 규제와 적합성 입증방안에 대한 연구)

  • Choi, J.W.;Park, J.H.;Kim, I.Y.;Kwak, Y.P.
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.11 no.2
    • /
    • pp.79-92
    • /
    • 2003
  • This study is to identify the hazard of ozone and to evaluate ozone effect that is flowed into the cabin when the airplane is flying at high altitude. For this purpose, it is studied that how ozone is generated in the air, what the effect on human body is due to the cabin ozone and what the design criteria is considering or preventing the ozone hazard. And, finally the regulations and means of compliance are studied and introduced to assure that the aircraft satisfies the design criteria related to ozone.

  • PDF

A Study on the Shaft End Displacement of the Centrifugal Pump under Nozzle Loads using Compliance Coefficients (컴플라이언스 계수에 의한 노즐하중 하에서의 원심펌프의 축단변위에 관한 연구)

  • 최복록;박진무;김광은
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.17 no.4
    • /
    • pp.233-239
    • /
    • 2000
  • Investigation results are presented fur the shaft end displacements due to the elastic deformation of the casing and support in double suction centrifugal pump. Suction and discharge nozzles of the pump are subject to external piping loads and, in API 610, maximum values of their components are specified. This means that each nozzle can be subject to various combinations of loading conditions. Considering upper and lower criteria of each load, we must perform for the 4,096 load cases, and assign the direction and range of the loads. So, this paper develops an efficient procedure(Compliance Coefficient Method) to calculate the shaft end displacements(@ coupling) to determine whether satisfying the pump's standard. Also, we analyzed the effects of the casing and support thickness on shaft end displacements.

  • PDF

Cavitation Compliance in 1D Part-load Vortex Models

  • Dorfler, Peter K
    • International Journal of Fluid Machinery and Systems
    • /
    • v.10 no.3
    • /
    • pp.197-208
    • /
    • 2017
  • When Francis turbines operate at partial load, residual swirl in the draft tube causes low-frequency pulsation of pressure and power output. Scale effects and system response may bias the prediction of prototype behavior based on laboratory tests, but could be overcome by means of a 1D analytical model. This paper deals with the two most important features of such a model, the compliance and the source of excitation. In a distributed-parameter version, compliance should be represented as an exponential function of local pressure. Lack of similarity due to different Froude number can thus be compensated. The normally unknown gas content in the vortex cavity has significant influence on the pulsation, and should therefore be measured and considered as a test parameter.

Cryogenic Fracture Toughness Evaluation for Austenitic Stainless Steels by Means of Unloading Compliance Method

  • Yu, Hyo-Sun;Kwon, Il-Hyun
    • Journal of Mechanical Science and Technology
    • /
    • v.15 no.1
    • /
    • pp.26-34
    • /
    • 2001
  • Most research to date concerning the cryogenic toughness of austenitic stainless steels has concentrated on the base metal and weld metal in weldments. The most severe problem faced on the conventional austenitic stainless steel is the thermal aging degradation such as sensitization and carbide induced embrittlement. In this paper, we investigate the cryogenic toughness degradation which can be occurred for austenitic stainless in welding. The test materials are austenitic stainless JN1, JJ1 and JK2 steels, which are materials recently developed for use in nuclear fusion apparatus at cryogenic temperature. The small punch(SP) test was conducted to detect similar isothermally aging condition with material degradation occurred in service welding. The single-specimen unloading compliance method was used to determine toughness degradation caused by thermal aging for austenitic stainless steels. In addition, we have investigated size effect on fracture toughness by using 20% side-grooved 0.5TCT specimens.

  • PDF

The Effects of Compliance Timing on Multinational Enterprises' Corporate Performance in China: An Application of Institutional Perspectives

  • Yang, Woo-Young;Han, Byoung-Sop
    • Journal of Korea Trade
    • /
    • v.24 no.4
    • /
    • pp.71-94
    • /
    • 2020
  • Purpose - Multi-National Enterprises (MNEs) tend to face a high level of institutional pressures in regions with high institutional development level. When complying with institutional pressures, firms try to make decisions to maximize profit while minimizing the risks to them. The purpose of this study is to investigate the influence of the institutional development level on institutional compliance timing by MNEs and the relationship between compliance speed and corporate performance. Design/methodology - The research focuses on three main variables, which are the institutional development level (as a determination of the institutional pressure level), the firm's compliance speed (as a determination of the compliance timing), and the firm's financial performance (as a determination of the corporate performance). We collected 19,869 firm-level data from CSMAR (the China Stock Market and Accounting Research), 6,922 CSR data from RKS (the Rankins CSR Ratings), and province and city-level data from the NERIM (National Economic Research Institute Index of Marketization) and NBSC (National Bureau of Statistics of China). The firms in China were chosen for analysis, and the analysis period was from 2008 to 2017. Random Effects GLS Regression was used to test the relationships among the variables. Findings - This study examined the effect of the institutional development level on the firm's compliance speed, together with the effect of compliance speed on the firm's financial performance of the MNEs in China. We found that the institutional development level positively influenced firms' financial performances, which means the firms' financial performances are better in the region with a high institutional development level. The compliance speed of institutional practice by firms was faster in the higher level of institutional development. However, the firm's delayed compliance led to better financial performance. Originality/value - Studies in the resource dependence view of Institutional Theory often fall short in understanding the theory by overlooking the firm's active decision-making. Thus, the findings do not present a full scope of corporate performance in this regard. This study not only found a way to test the role of a firm's independent decision-making (i.e., compliance timing) when facing the institutional pressure but also prove the significant role of the compliance timing on corporate performance. Also, we were able to test the effect of institutional development level, controlling location-specific variables because we used CSR performance data for MNEs operating in China. Lastly, by doing the above, the findings of this study suggest practical implications to the industry practitioners in MNEs.

A Study on Hypertensive Patients Compliance to Medical Recommendations (고혈압 환자의 치료지시 이행에 관한 연구)

  • 최영희
    • Journal of Korean Academy of Nursing
    • /
    • v.10 no.2
    • /
    • pp.73-85
    • /
    • 1980
  • The purpose of this study was to investigate the compliance behavior of hypertensive patients in light of their health belief model that explains an individual's compliance with health maintenance or getting well. Although there are many effective regimens and treatments for hypertension nowadays. the most important point to be taken to consideration in their behavioral aspect is their compliance with regard to the control of body weight. eating habits as to salt and cholesterol intake. stresses. activity patterns and smoking as related to their life style. The important reasons for the failure in the control of hypertensive patients are the complexity of regimens to be complied to. irregular medication and the life long restrictions in their own life style. The compliance of patients to medical regimens and rocommendations or failure to do so is an essential factor. Accordingly. the degree of the patient's compliance is an important determinant as to the success or failure of hypertension control. The subjects for this study were 187 hypertensive patients selected from admitted and out patients of the medical department at seven University Hospitals in Seoul. Data was collected from Dec. 1, 1979 to Feb. 15, 1980 using the questionaire method and was analysed by the use of means. standard deviations, coefficient of correlations, analysis of variance and multiple regression analysis. The results obtained are as follows A. Of the seven independent variables in light of health belief model. benefit. barrier and severity are closely related to patient's compliance behavior. Therefore these variables could be used as determinants to predict and modify the hypertensive behavior. 1. Benefit is the most important and significant of the variables for explaining the dependent variables. It accounts for the highest variance of patient's compliance. (23.62%) 2. Then taking the former together with barrier. the variance of compliance showed on increase. (26.59%) 3. And with the addition of severity to the first two. the variance of compliance was also increased. (28.l2 %) B. Except for susceptibility all the independent variables such as severity. benefit, knowledge. motivation and barrier are correlated to dependent variable compliance. C. Sex. marital status and religion appeared to have significant influence on the dependent variables. Therefore one could conclude that the more the patients are aware that hypertension is a threat to health. the more they understand the benefit of taking actions to prevent such a threat. and the less they perceive any barrier when taking action. the more compliant they become in following medical regimens and recommendations. Age. marital status and religion played a significant influence to their compliance. Accordingly. the selected structural variables and demographic variables which have influenced sick role behavior of the hypertensive patient must be integrated to teaching and counselling programs for better hypertension control.

  • PDF