• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.26-32
• /
• 2017

Previous shape sensors including bend sensors and optic fiber based sensors are widely used in various applications including goniometer and surgical robots. But theses sensors have large nonlinearity, limited in the range of sensing curvature, and sometimes are expensive. This study suggests a new concept of bend sensor using cable-conduit which consists of the outer sheath and the inner wire. The outer sheath is made of helical coil whose length of the central line changes as the sheath bends. This length change of the central line can be measured with the length change of the inner cable. The modeling and the experimental results show that the output signal of the proposed sensor is linearly related with the bend angle of the sheath with root mean square error of 5.3% of $450^{\circ}$ sensing range. Also the polynomial calibration of the sensor can decrease the root mean square error to 2.1% of the full sensing range.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.40-47
• /
• 2002

This paper analyzes the performance of an optical line termination system in ATM based Passive Optical Network(PON) using the operational analysis. We analyze it using system parameters such as utilization, throughput and routing frequency based on the buffer structure in each block of ATM-PON. Furthermore, we derive the mean response time and the visit ratio of each block, and then search the bottleneck block that hinders the system performance. We found that the 622Mbps 16x16 switching block is the bottleneck block for ATM-PON. In this bottleneck block, the loss probability increases rapidly when the cell arrival rate increases.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2470-2478
• /
• 1999

In this paper, algorithm is proposed to forecast line utilization using SNMP MIB-II. We calculate line utilization using SNMP MIB-II on TCP/IP based Internet and suggest a method for forecasting a line utilization on the basis of past line utilization. We use a MA model taking difference transform among ARIMA methods. A system for orecasting is proposed. To show availability of this algorithm, some results are shown and analyzed about routers on real environments. We get a future line utilization using this algorithm and compare it ot real data. Correct results are obtained in case of being few data deviating from mean value. This algorithm for forecasting line utilization can give effect to line c-apacity plan for a manager by forecasting the future status of TCP/IP network. This will also help a network management of decision making of performance upgrade.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.839-847
• /
• 2000

This paper presents modal analysis and mean conveying velocity (M.C.V.) control of bowl parts feeder activated by piezoactuators. Bowl parts feeders are being widely used in many industry fields for automatic assembly line. In general, the electromagnet has been and being used as exciting actuator of these vibratory bowl feeders. However, because of complexity of its mechanism and limited capability of the electromagnet actuator, there exist various impending problems such as severe noise, nonlinear motion of parts, passive characteristics and so forth. As one of solutions for these problems, piezoelectric actuators as new actuating technology have been proposed recently to excite the bowl parts feeder. In this paper, modal analysis of the proposed model has been performed to examine the modal characteristics of the model by using commercial FEM software and modeling with respects to MCV is constructed. Finally, MCV of the parts is to be controlled to track the desired one with PID controller.

• The Journal of the Korean dental association
• /
• v.8 no.11
• /
• pp.629-644
• /
• 1970

Higley씨 법에 의한 한국인의 Roentgenographic Cephalometry의 기준치를 조사하기 위하여 남자 150명,여자140명 합계 290명을 대상으로 하여 이를 분석계측하였다. 대상자의 대부분은 정상적인 교합자중에서 선택되었으며 악골과 안면이 잘 조화되고 있었다. 연구성적은 표의 형식으로 요약되었고 5,7,10,15,20,23세등의 연령군에 대하여 17항목의 선상계측과 20항목의 각도계측을 시행하였으며 당 계측치의 Mean, Standard deviation,Minimum,Maximum등을 산출하였다. 본 연구를 통하여 Cranial depth는 배인이 한국인에 비하여 큰 차이를 보이며(Line-NZ,FT)원부에 있어서는 한국인이 백인에 비하여 후퇴되었음을 알았다.(Angle-MNS),이것이 한국인과 백인의 안모의 판이점이라고 사료된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.4
• /
• pp.56-62
• /
• 2008

This study presents the aerodynamic design and numerical analysis results on a transonic centrifugal compressor which is used for gas turbine systems. Mean-line analysis and quasi-3D analysis are used for the aerodynamic design, and Reynolds-averaged Navier-Stokes analysis is applied to flow analysis of the compressor. The aerodynamic parameters for a transonic compressor, such as pressure coefficient, swirl parameter, blade loading, are discussed, and flow characteristics in the impeller and diffuser are discussed.

• Journal of the Korean Home Economics Association
• /
• v.38 no.12
• /
• pp.111-129
• /
• 2000

The purpose of this study is to investigate the level of consumer instantly impulse buying in cuber market user. Also this study analyzes causal effect on consumer instantly impulse purchasing by demographic and social, place and promotion, consumer emotion state, and consumer internal and psychological variables. The data had been collected from on-line research method with 1,034, as using cuber market. The major statistical methods used for data analysis are frequency, percentile, mean, factor analysis, multiple regression analysis, Pearson's correlation analysis, and path analysis. The result of causal effect analysis were as follows; First, the variables affecting possession oriented materialism were sex and age. Second, the variables affecting self-control were sex, income, account of credit card, and instantly state of mind. Third, variables directly affecting instantly impulse purchasing were serif employed, banner advertisement, experience of cuber shopping, shopping mall pattern, instantly state of mind, purpose of shopping, happiness and success oriented materialism, and self-control. Also sex, income account of credit card, and instantly state of mind emerge to indirectly effect via self-control. Especially, the variables of success oriented materialism and instantly state of mind influenced on the highest of relative variables in consumer instantly impulse purchasing.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.26-31
• /
• 2015

The purpose of this paper is to measure the induced voltage of the downscaled and simulated overhead ground wire of a 22.9kV-Y distribution line. This study performed a test of the downscaled and simulated distribution line according to whether it is grounded or not and the value of the ground resistance. In order to verify the reliability of the data measured by the test, the data was analyzed using the Minitab 17 program. It was found that the induced voltage of the downscaled and simulated distribution line is influenced by the value of the ground resistance. It was also found that the ground resistance obtained at a certain point is closely related to whether electric poles are grounded or not. The analysis results of the measured test data with a statistical method showed that the Anderson Darling (AD) was analyzed to be the smallest as 0.188 when the ground resistance of the electric poles had been maintained at $10{\Omega}$. In addition, the P value analyzed to be 0.894 which is in the proximity of the theoretical value of 1 and verified the reliability of the test data. It could be seen that the data measured by the downscaled simulation test forms a linear graph. It is thought that if a distribution line is installed in the same manner as the downscaled, simulated distribution line, the mean induced voltage will be reduced and reliability will be increased.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.291-296
• /
• 2012

Triploids are a useful tool for biomass production and molecular breeding of trees with a long life span. Triploids of the poplar 'Hyunsasi' (Populus alba ${\times}$ P. glandulosa) have been developed by crossing between female diploids and a male tetraploid. The tetraploid was developed around the 1970s at Korea Forest Research Institute by colchicine-induced chromosome doubling. Seedlings of the $F_1$ generation were analyzed using flow cytometry to verify their ploidy status. The mean relative fluorescence index of 3 F1 poplars, labeled as Line- 1, Line-17, Line-18, were approximately 1.5 times higher than those of diploid poplars, and the results clearly indicated that they were triploids. The phenotype of the F1 poplars included larger leaves and thicker stem than diploids, and abnormal leaf morphology, especially in the triploid 'Line-18'. Three triploid lines developed roots more slowly and had less roots than diploid. However, 3 poplar cytotypes (2x, Line-1, Line-17) rooted within 10 days on MS medium. In contrast, compared with the 3 cytotypes, the Line-18 showed about 80% and 70% in the rooting rate and the number of roots. The triploid poplars could be directly utilized for biomass production and with their sterility, they could serve as basic material for genetic transformation. In addition, flow cytometric analysis proved to be an effective and reliable method for screening forest trees for their ploidy level.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.627-634
• /
• 1995

The purpose of this study to analyze characteristics of soft tissue profile in Korean young adults. The sample consisted of 50 young adults (25 males and B females) who had pleasing and normal occlusion. Soft tissue analysis (facial convexity angle, nasolabial angle, H-angle, Z-angle, E-line to upper lip, lower lip, Sn-pog' to upper lip, lower lip) was performed on lateral cephlograms. Mem and standard deviation was obtained. When compared by other studies, mean profile of this sample was relatively straighter and both the upper and lower lips was more protrusive.