• The Korean Journal of Zoology
• /
• v.31 no.1
• /
• pp.56-61
• /
• 1988

The taxonomic status of Moroco Jagowskii and M oxycephalus a pair of sibling species inhabiting in Korean fresh waters, has been unclear up to date. Recently a sympatric area of these species was found (Kang, 1987). The purpose of this study was to clarify their specific status by analysing specimens collected from the sympatric area of these species. Isozyme analysis and morphometric comparison were performed. Among 26 loci screened 6 loci (Aco, Est-2, E-X, Gk-3, Ipo, Me) showed fixed allelic difference between them and these loci could be used as genetic markers to distinguish them. Isozyme analysis indicates that no hybridization occurs and therefore it is assumed that isolating mechanism is completed and they are distinct species. The mean number of scales above lateral line (SAL) of M Jagowskii and M oxycephalus at sympatric area was 24.93 $\pm$1.95 and 17.33$\pm$0.72 respectively, and it seems as the result of character displacement. A finer microhabitat segregation between them is noticed. M oxycephalus is found along the effluent streams whereas M lagowskii is distributed mostly in the main stream at sympatric area.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.3
• /
• pp.183-191
• /
• 2022

A design method for a propeller type rim-driven axial-flow turbine for a micro-hydropower system is presented. The turbine consists of pre-stator, impeller and post-stator, where the pre-stator plays a role as a guide vane to provide circumferential velocity to the on-coming flow, and the impeller as a rotational power generator by absorbing angular momentum of the flow. BEM(Blade Element Method), which is based on the turbine Euler equation, is employed to design the pre-stator and impeller blades. NACA 66 thickness form and a=0.8 mean camber line, which is widely accepted as a marine propeller blade section, is used for the pre-stator and turbine blade section. A CFD method, derived from the discretization of the RANS equations, is applied for the analysis of the designed turbine system. The design conditions of the turbine is confirmed by the CFD calculation. Turbine characteristic curve is calculated by the CFD method, in order to provide the performance characteristics at off-design operation conditions. The proposed procedures for the design of a propeller type rim-driven axial-flow turbine are established and confirmed by the CFD analysis.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.1
• /
• pp.1-15
• /
• 2018

The characteristics of the rock cleavage of Jurassic Geochang granite were analysed using the distribution of microcrack lengths and spacings. The length and spacing-cumulative diagrams for the six directions of rock cleavages were arranged in increasing order ($H2{\rightarrow}R1$) on the density (${\rho}$) of microcrack length. The various parameters were extracted through the combination of above two types of diagrams. The evaluation for the six directions of rock cleavages was performed using the four groups (I~IV) of parameters such as (I) intersection angle (${\alpha}-{\beta}$), exponent difference (${\lambda}_S-{\lambda}_L$), length of line (ol and ll'), length ratio (ol/os and ll'/sl'), mean length ((ss'+ll')/2), area of right-angled triangle (${\Delta}oaa_a^{\prime}$ and ${\Delta}obb_a^{\prime}$) and area difference (${\Delta}obb^{\prime}-{\Delta}oaa^{\prime}$ and ${\Delta}obb_a^{\prime}-{\Delta}oaa_a^{\prime}$), (II) length of line (oa and os) and area (${\Delta}oaa^{\prime}$), (III) length of line (sl') and length ratio (ss'/ll') and (IV) length of line (ob, ss' and ls') and area (${\Delta}obb^{\prime}$, ${\Delta}ll^{\prime}s^{\prime}$, ${\Delta}ss^{\prime}l^{\prime}$ and ⏢ll'ss'). The results of correlation analysis between the values of parameters for three rock cleavages and those for three planes are as follows. The values of parameters for three rock cleavages are in orders of (I) H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2), (II) R < G < H, (III) G < H < R and (IV) H < G < R. On the contrary, the values of parameters for three planes are in orders of (I) R' < G' < H', (II) H' < G' < R' and (III and IV) R' < H' < G'. Especially the values of parameters belonging to group I and group II show mutual reverse orders. In conclusion, this type of correlation analysis is useful for discriminating three quarrying planes.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.311-324
• /
• 2016

The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for three quarrying planes and three rock cleavages was performed using the parameters such as (1) reduction ratio between the value of spacing and the value of length, (2) microcrack spacing frequency(N), (3) total spacing($1mm{\geq}$), (4) exponential constant(a), (5) magnitude of exponent(${\lambda}$), (6) mean spacing($S_{mean}$), (7) difference value($S_{mean}-S_{median}$) between mean spacing and median spacing($S_{median}$) and (8) density of spacing. Especially the close dependence between the above spacing parameters and the parameters from the spacing-cumulative frequency diagrams was derived. The discrimination factors representing three quarrying planes and three rock cleavages were acquired through these mutual contrast. The analysis results of the research are summarized as follows. First, the reduction ratios of frequency(N), mean value, median value, the above difference value($S_{mean}-S_{median}$) and density for three rock cleavages are in orders of G(grain, (G1 + G2)/2) < H(hardway, (H1 + H2)/2) < R(rift, (R1 + R2)/2), H < G $\ll$ R, H < G $\ll$ R, H < G < R and H < G $\ll$ R. The values of the above five parameters for three planes show the various orders of R'(rift plane) $\ll$ H'(hardway plane) < G'(grain plane), R' $\ll$ G' < H', R' < H' < G', R' < G' < H' and R' $\ll$ H' < G', respectively. Second, the values of (I) parameters(2, 3, 4 and 5) and (II) parameters(6, 7 and 8) are in orders of (I) H < G < R and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Third, to review the overall characteristics of the arrangement among the six diagrams, these diagrams show an order of R2 < R1 < G2 < G1 < H2 < H1 from the related chart. In other words, above six diagrams can be summarized in order of rift(R1 + R2) < grain(G1 + G2) < hardway(H1 + H2). These results indicate a relative magnitude of rock cleavage related to microcrack spacing. Especially, two parameters for each diagram, the above difference value($S_{mean}-S_{median}$) and mean spacing, could provide advanced information for prediction the order of arrangement among the diagrams. Finally, the general chart for three planes and three rock cleavages were made. From the related chart, three exponential straight lines for three rock cleavages show an order of R(R1 + R2) < G(G1 + G2) < H(H1 + H2). On the contrary, three lines for three planes show an order of H'(R2 + G2) < G'(R1 + H2) < R'(G1 + H1). Consequently, correlation of the mutually reverse order between three planes and three rock cleavages can be drawn from the related chart.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.56-62
• /
• 2009

In this paper we investigate an analytical approach for noise properties and geometric structure in Computed Radiography(CR) images of industrial steel-tubes. Over thirty diverse radiographic images are sampled from industrial radiography measurements according to radiation intensity. Each image consists of three regions; background, thickness and inner-tube. Among these the region of inner-tube is selected for the object of analysis. Geometric structure which includes the noise generation is analyzed by the statistical and functional methodology. The analysis is carried on spacially and line by line. It verifies the geometrical transfigure from the circle configuration of steel-tube and noise variation. The estimation of fitting function and its error are the geometric factors. The statistics such as standard deviation, mean and signal-to-noise ratio are noise parameters for discrimination. These factors are considered under the intensity variation which is the penetrative strength of radiation. The analysing results show that the original geometry of circle is preserved in the form of elliptic or short/long diameter circle, and the noise deviation has increased inverse proportional to the radiation intensity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.3
• /
• pp.234-240
• /
• 2014

We investigated the effects of feeding rate on the growth performance, blood components, and histology of growing olive flounder Paralichthys olivaceus. We determined the optimum feeding rate (initial fish mean weight of $240{\pm}10.9$ g) at the optimum water temperature. Two replicated groups of fish were fed a commercial diet at rates of 0%, 0.5%, 0.75%, and 1.0% body weight (BW) per day, and to satiation. Feeding trial was conducted using a flow-through system with 10 1.2-metric ton aquaria receiving filtered seawater at $19-21^{\circ}C$ for three weeks. Weight gain (WG) for fish fed to satiation was significantly higher than that of unfed fish and fish fed at 0.5% and 0.75% BW per day. The WG of fish fed at 1.0% BW per day was significantly higher than that of unfed fish and of fish fed at 0.5% BW per day. However, there were no significant differences in WG between fish fed at 0.5% BW per day and those fed at 0.75% BW per day, between fish fed at 0.75% BW per day and those fed at 1.0% BW per day, and between fish fed at 1.0% BW per day and those fed to satiation. The specific growth rates of fish fed at 1.0% BW per day and those fed to satiation were significantly higher than those of unfed fish and of fish fed at 0.5% BW per day. Broken-line regression analysis of weight gain showed that the optimum feeding rate of olive flounder weighing 240 g was 1.09% BW per day at the optimum water temperature.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.4
• /
• pp.277-285
• /
• 2012

In this study, Expressed Sequence Tag-Simple Sequence Repeat (EST-SSR) analyses were used to clarify the genetic polymorphisms among Korean ginseng cultivars and breeding lines and to classify them into distinct genetic groups. Polymorphic and reproducible bands were produced by 14 primers out of total 30 primers used in this study. Fourteen EST-SSR loci generated a total of 123 bands. Amplified PCR products showed the highly reproducible banding patterns at 110~920 bp. The number of amplified bands for each EST-SSR primers ranged from 2 to 19 with a mean of 8.8 bands. P26 and P35 primers showed 13 and 12 banding patterns, respectively. The number of alleles for each EST-SSR locus ranged from 1.67 to 2.00 with a mean of 1.878 alleles. P34 and P60 primers showed the highest and the lowest genetic polymorphism, respectively. Cluster analysis based on genetic similarity estimated by EST-SSR markers classified Korean cultivars and breeding lines into 4 groups. Group included Gopoong and Chunpoong and 9 breeding lines (55%), group included 2 breeding lines (10%), group included 3 breeding lines (15%), group included Gumpoong and 3 breeding lines (20%). Consequently, the EST-SSR marker developed in this study may prove useful for the evaluation of genetic diversity and differentiation of Korean ginseng cultivars and breeding lines.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.22-28
• /
• 2011

Purpose: This article attempted to examine how teeth for restoration is made in a clinical practice and utilize it as future educational material of teeth formation and basic data for additional research. Materials and methods: This experiment investigated the models sent to milling center for production of zirconia crowns. After scanned with Lava CAD/CAM System (3M ESPE, Seefeld, Germany), they are measured on 'ImageJ (version 1.32j, National Institutes of Health, USA)' program and compared and analyzed. Convergence angle from mesio-distal surfaces and bucco-lingual surfaces of each teeth are measured. Also, bucco-lingual diameter of the region lowered as much as 0.4 mm from incisal edge in anterior teeth except canines.(This measure is defined as the Peak 0.4) The analysis of data between each group was conducted by Windows SPSS statistic program, and was proved significant on 95% confidence level by independent t-test, one-way ANOVA and multiple analysis (Sheff${\'{e}}$ test). Results: The mean value of convergence angle was $18.67^{\circ}$ It is ranked as molar ($26.70^{\circ}$) > premolar ($16.87^{\circ}$) > anterior teeth ($14.81^{\circ}$) in the order of mesio-distal convergence angle; anterior teeth ($22.32^{\circ}$) > molar ($20.93^{\circ}$) > premolar ($15.41^{\circ}$) in the order of bucco-lingual convergence angle. The mean value of Peak 0.4 was 1.18 mm. Conclusion: Convergence angle of abutment of zirconia all ceramic crown has difference depending on the location in the arch. Due to the nature of production of zirconia all ceramic crown, convergence angle of abutment and line angle finishing degree can have an effect on internal suitability of restoration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.431-438
• /
• 2011

This study investigated the problem of mean-field bias correction under the assumption that the radar and rain gauge rainfall data follow the log-normal distribution. Regression curves for the average, median and mode of the radar and rain gauge rainfall were derived and evaluated for their usefulness. Additionally, these regression curves were compared with those derived under the assumption that the radar and rain gauge data follow the normal distribution. This study investigated the regression results for the Typhoon Meami occurred in 2003 as an example. As results, three regression lines with the radar rainfall as the independent variable were found to underestimate the rainfall, while those with the rain gauge rainfall as the independent variable to overestimate. Among three types of regression curves considered, the result for the average was most appropriate. However this case was found to be inferior to the regression line passing the origin under the assumption of the normal distribution with the rain gauge rainfall as its independent variable. So it was hard to conclude that the consideration of the log-normality on the correction of radar rainfall is beneficial.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.103-114
• /
• 2013

In this study, we established the ortho mosaic imagery on the Korean Peninsula using KOMPSAT-2 images and conducted an accuracy assessment. Rational Polynomial Coefficient(RPC) modeling results were mostly less than 2 pixels except for mountainous regions which was difficult to select a Ground Control Point(GCP). Digital Elevation Model(DEM) which was made using the digital topographic map on the scale of 1:5,000 was used for generating an ortho image. In the case of inaccessible area, the Shuttle Radar Topography Mission(SRTM) DEM was used. Meanwhile, the ortho mosaic image of the Korean Peninsula was produced by each ortho image aggregation and color adjustment. An accuracy analysis for the mosaic image was conducted about a 1m color fusion image. In order to verify a geolocation accuracy, 813 check points which were acquired by field survey in South Korea were used. We found that the maximum error was not to exceed 5m(Root Mean Square Error : RMSE). On the other hand, in the case of inaccessible area, the extracted check points from a reference image were used for accuracy analysis. Approximately 69% of the image has a positional accuracy of less than 3m(RMSE). We found that the seam-line accuracy among neighboring image was very high through visual inspection. However, there were a discrepancy with 1 to 2 pixels at some mountainous regions.