• 제목/요약/키워드: Mean grain size

검색결과 315건 처리시간 0.028초

우리나라 3개 하구역 대형저서동물 군집 시공간 분포 (Spatio-temporal Distribution of Macrozoobenthos in the Three Estuaries of South Korea)

  • 임현식;이진영;이정호;신현출;류종성
    • 한국해양학회지:바다
    • /
    • 제24권1호
    • /
    • pp.106-127
    • /
    • 2019
  • 국가해양생태계종합조사의 일환으로 우리나라의 주요 하천인 한강, 금강, 낙동강 하구역에 서식하는 저서동물 군집 특성을 파악하였다. 현장조사는 2015년부터 2017년에 걸쳐 매 계절별(겨울: 2월, 봄: 5-6월, 여름: 7-9월, 가을: 11월)로 수행하였다. 시료채집은 한강 하구역에 7개, 금강 하구역에 6개, 낙동강 하구역에 7개의 정점을 설정하여 총 20개의 정점에서 수행되었다. 대형저서동물 채집은 van Veen grab(채집면적 $0.1m^2$)을 사용하여 각 정점 당 3회씩 반복채집 후 1 mm 망목의 표준체를 이용하여 펄을 제거하였다. 조사결과 총 1,008종의 저서동물이 출현하였으며 한강 하구역에서 602종, 금강 하구역에서 612종, 낙동강 하구역에서 619종이 출현하여 유사한 양상을 보였다. 평균 밀도는 $1,357ind./m^2$로서 한강 하구역에서 $1,127ind./m^2$, 금강 하구역에서 $1,357ind./m^2$ 및 낙동강 하구역에서 $1,587ind./m^2$으로 한강 하구역이 가장 낮고 낙동강 하구역이 가장 높았다. 평균 생체량은 $116.8g/m^2$으로 한강 하구역에서 $49.0g/m^2$, 금강 하구역에서 $129.0g/m^2$ 및 낙동강 하구역에서 $174.2g/m^2$이 출현하여 밀도와 유사한 양상을 보였다. 한강과 금강, 낙동강 하구역 모두 환형동물이 출현종수와 밀도에서 우점 분류군이었다. 한강과 금강 하구역에서는 연체동물이, 낙동강 하구역에서는 극피동물이 생체량 우점 분류군이었다. 각 하구역에서 4% 이상의 밀도 점유율을 보이는 우점종은 모두 다모류로서 한강 하구역의 경우 Dispio oculata와 Heteromastus filiformis, Aonides oxycephala였으며, 금강 하구역에서는 Heteromastus filiformis와 Scoletoma longifolia, 낙동강 하구역에서는 Pseudopolydora sp.와 Aphelochaeta sp.였다. 이러한 우점종들은 하구역에 따라 출현밀도의 차이가 있었다. 본 연구 결과 한강 하구역에서는 평균 입도, 금강 하구역에서는 염분 및 실트함량, 낙동강 하구역에서는 염분, 용존산소, 강열감량, 실트 함량이 군집 조성에 영향을 미치고 있었다. 따라서 한강 하구역의 경우 퇴적환경 변화를 초래하는 요인들(골재채취, 제방축조, 매립 등)에 대한 관리가 우선되어야 할 것으로 판단되며, 금강 하구역에서는 금강으로부터의 담수유입 및 주변 퇴적 환경에 변화를 줄 수 있는 요인들에 대한 관리가 우선시 되어야 할 것으로 보인다. 또한 낙동강 하구역의 경우 마산만 내측의 빈산소수괴 발달 양상과 주요 우점종의 공간분포에 대한 모니터링을 중점적으로 해야 할 것으로 판단된다.

한국 남동해역 내대륙붕 세립퇴적물의 분포 및 퇴적작용 (Sedimentation and Distribution Pattern of the Fine-grained Sediments in the Southeastern Inner Shelf of Korea)

  • 유동근;김길영;이호영;서영교;박수철;김대철
    • 한국수산과학회지
    • /
    • 제37권2호
    • /
    • pp.159-169
    • /
    • 2004
  • Sedimentation and depositional pattern of the fine-grained sediments in the southeastern inner shelf of Korea were studied using a very high-resolution seismic profiles and sediment data. The recent mud deposits up to 45 m thick are distributed in the inner shelf forming a nearshore belt from the eastern part of Geoje Island to off the Pohang along the coast. The sediment in this area consists of homogeneous mud with mean grain size between $8.6\;to\;5.3\phi$ and does not show any distinct variability It gradually becomes finer and well sorted northeastward along the coast. Sediments normally appear as structureless massive mud but X-radiographs show that some bioturbation and faint lamination are present. The sediments accumulate at a rate of 0.18-0.44 cm/yr and the rate coincides well with the long-term (a 1000-year scale) accumulation based on very high-resolution seismic data. Distribution of wet bulk density and velocity shows a gradual increase from the southeastern part of Ulsan to off Pohang, whereas porosity shows a reverse pattern. Correlations between velocity and porosity/mean grain size are different from other regions compared, due to the difference of sediment texture and sedimentary environment. The recent shelf deposits are seismically characterized by three distinct facies: 1) well-stratified (near the river mouth), 2) semi-transparent (eastern part of Geoje Island), and 3) transparent (off Ulsan). The results suggest that fine-grained sediment derived from rivers, forming a nearshore mud belt, have been transported northeastward by the northeastward-flowing coastal current.

대불산업단지 도로먼지 내 중금속류 오염 특성: 입도와 자성에 따른 구분 (Characteristics for Heavy Metal Pollution in Road Dust from Daebul Industrial Complex: Classification by Particle Size and Magnetic Separation)

  • 정혜령;최진영;나공태
    • 환경영향평가
    • /
    • 제29권4호
    • /
    • pp.252-271
    • /
    • 2020
  • 본 연구에서는 대불산업단지 내 14개 지점에서 채취한 도로먼지의 입도, 중금속 성분, 자기특성 등 물리 화학적 특성을 파악하고, 오염도 평가를 통해 주변 환경에 미치는 영향에 대한 고찰을 시행하였다. 도로먼지 내 금속농도는 Fe>Zn>Cu>Pb>Cr>Ni>As>Cd>Hg 순이었으며, 중금속류 오염은 연구지역의 주요 산업 및 교통 활동에 영향을 받은 것으로 나타났다. 도로먼지 내 중금속 원소와 입도와의 상관관계 분석결과는 Fe 및 모든 분석된 원소가 서로 유의한 상관관계를 가지며, 입자크기와는 유의한 음의 상관성을 가짐을 보여주었다(p<0.05). 그러나 큰 금속 입자들의 노면 유입으로 인해 일부 금속의 경우 >1000 ㎛의 입자의 중금속류 농도가 가장 높았으며, 이 분율의 단위면적당 오염부하량이 다른 입도분율보다 높았다. 도로먼지에서 자성입자의 분리 후 Cr, Ni, Cu, Zn, Cd, Pb의 농도 수준이 전체의 85(As)-22(Ni)%로 감소함을 알 수 있었다. 연구지역 도로먼지의 평균 중금속 오염도는 3지역 토양환경 우려기준을 초과하지 않아 우려할 수준은 아닌 것으로 나타났으나, 일부 지점의 경우 Zn 농도 기준을 초과해 재 비산이나 비점오염유출 등을 통해 도로먼지가 주변 환경에 미치는 영향과 효과적 관리방법에 대한 더욱 자세한 연구가 필요한 것으로 판단된다.

혼합해빈의 퇴적물 분포 특성과 미지형 경관변화 - 태안해안국립공원 파도리 해빈을 중심으로 - (Sediments Distribution and Micro-topographical Landscape Changes of a Composite Mixed Beach - Padori Beach in Taean National Park -)

  • 이원영;성효현
    • 한국지형학회지
    • /
    • 제20권4호
    • /
    • pp.1-13
    • /
    • 2013
  • 파도리 해빈은 우리나라의 대표적인 혼합해빈으로써 태안해안국립공원에 속하며 다양한 미지형 경관의 변화가 나타나는 해빈이다. 본 연구의 목적은 소산형 저조간석지와 반사형 비치페이스로 이루어진 5~7m의 대조차 혼합해빈인 파도리 해빈의 퇴적물 분포 특성을 미지형과의 관계를 통해 이동 매커니즘을 밝히고 파랑조건과 조석조건에 따른 미지형 경관변화의 양상을 파악하는 것이다. 연구 결과 첫째, 남부에서 북부로 갈수록 퇴적물 입도가 작아지는 경향성을 보였으며 해빈 남부에 넓게 펼쳐진 파식대가 해식애와 함께 주요한 퇴적물의 기원임을 알 수 있다. 파도리 해빈의 비치페이스와 범의 퇴적물 분포와 해빈을 가로지르는 방향과 연안 방향으로 일정한 입도 분포의 경향성을 보이는 것에 대해서는 선별운반작용으로 설명할 수 있다. 둘째, 혼합해빈의 미지형 경관변화의 주요한 원인에는 파랑과 조석이 있으며, 저파랑 환경에서 범이 발달하고 상부비치페이스에 비치 커습이 나타나는 반면 고파랑 환경에서 범의 규모가 작아지고 상부 비치페이스의 퇴적물은 혼합되는 경향을 보인다.

한국 남동해역 사질퇴적물의 물리적 성질 (Physical Properties of Sandy Sediment in the Southeastern Coast of Korea)

  • 김길영;김대철;박수철;유동근;최진혁;김정창
    • 한국수산과학회지
    • /
    • 제29권5호
    • /
    • pp.663-676
    • /
    • 1996
  • 한국 남동해역의 사질퇴적물의 물리적 성질 분포는 수심과 해류의 영향이 큰 것으로 나타났다. 수심 80m를 전후하여 잔류퇴적물인 muddy sand가 분포하고 모래함량은 $60\%$ 이상이며 수직적인 조직 및 물성변화는 별로 크지 않다. 표층퇴적물의 수평분포의 경우 평균입도는 한반도 동남해역과 대마도 중간선에서 가장 조립질로 나타나며 이와 완전히 일치하지는 않지만 전밀도의 경우도 중앙부가 높게 ($1.80g/cm^3$ 이상) 분포한다. 공극율과 함수율의 경우는 전밀도의 분포와 반대로 대한해협의 중심부 부근이 낮고 한반도나 대마도 쪽이 높은데 이는 평균입도 분포에서도 볼 수 있듯이 세립질 퇴적물 성분의 증가와 연관되어 있다. 또한 대마해류의 주 통로를 중심으로 북서-남동 방향으로 증가하는 양상이 뚜렷하게 관찰된다.

  • PDF

수중 자갈의 전단 및 파쇄 특성에 관한 실험적 연구 (Experimental Study on the Shearing and Crushing Characteristics of Subaqueous Gravels in Gravel Bed River)

  • 김소라;정승원;이광수;유동근
    • 한국지구과학회지
    • /
    • 제42권2호
    • /
    • pp.164-174
    • /
    • 2021
  • 본 연구는 육상 기원 조립질 하상 퇴적물의 높은 이동성에 영향을 미치는 전단과 파쇄특성을 조사하기 위하여 링전단실험을 수행하였다. 평균 입경 6 mm 자갈에 대하여 링전단시험장치를 사용하여 전단시간(shear time)과 전단속도(shear velocity)에 따른 전단-변형률 역학특성과 입자파쇄 특성을 조사하였다. 특히 배수(장시간 전단)와 비배수(단시간 전단)조건을 고려하기 위하여 초기 전단속도(0.01→0.1→1 mm/sec와 0.1→0.01→1 mm/sec)에 따른 링전단실험을 수행하였다. 실험결과에 따르면, (i) 배수와 비배수조건 모두에서 입자파쇄 특성이 확인되었지만, 비배수조건에서 상대적으로 큰 전단저항을 받는 것으로 나타났다. (ii) 배수조건에 관계없이 수중 자갈의 초기 전단속도는 전단응력-전단변형률 관계곡선을 결정하는 중요한 요인으로 나타났다. (iii) 입자파쇄는 평균 입경에 영향을 받으며 사용된 수중 자갈은 상대적으로 큰 입자파쇄 특성을 보였다. 그리고 (iv) 전단응력 결정에서 가장 크게 영향을 미치는 영향인자는 전단시간과 초기 전단속도임을 확인할 수 있었다. 결론적으로 모래와 자갈을 다량 함유한 조립질 하상 퇴적물은 입자-입자 간 상호접촉, 마모, 맞물림, 마찰 등의 물리적 이동과정을 통해 입자파쇄와 세립토 함량이 증가되고 이러한 현상은 하상 퇴적물의 고유동성을 초래하는 원인이 되는 것으로 판단된다.

북동태평양 원양성 적점토의 지질공학적 특성에 관한 연구 (Geotechnical Properties of Pelagic Red Clay in Northeast Equatorial Pacific)

  • 지상범;이현복;형기성;주세종;이근창;함동진
    • 한국해양학회지:바다
    • /
    • 제13권3호
    • /
    • pp.286-294
    • /
    • 2008
  • 북동태평양 클라리온-클리퍼톤 균열대(Clarion-Clipperton Fracture Zone, C-C지역) 사이의 북쪽지역에 위치한 연구지역 원양성 적점토 표층퇴적물의 특성파악을 위해 기계적 교란이 적은 다중주상시료채취기로 24개 정점에서 시료를 채취하였다. 채집된 퇴적물 시료의 입도, 함수율, 밀도, 공극률 등 지표 특성과 전단강도, 컨시스턴시 한계 등의 지질공학적 특성 그리고 생물기원 오팔함량 및 광물조성을 분석하였다. 원양성 적점토가 분포하는 광범위한 연구지역($15^{\circ}45'{\sim}16^{\circ}55'N,\;125^{\circ}20'{\sim}134^{\circ}10'W$) 퇴적물의 지표 특성 및 광물학적 특성은 동일 경도 상에서 동측지역과 서측지역 사이의 큰 거리차이에도 불구하고 매우 균일한 특성을 보인다. 단지 표층퇴적물의 전단강도는 KR1 지역에 비해 KR2지역이 고화된 특성을 보이는데, 이것은 KR2 지역에서 나타나는 하부 Unit 3의 영향에 의한 것으로 판단된다.

벼의 자연통풍건조에 있어서 통풍량이 건조에 미치는 영향에 관한 연구 (A Study on Effects of Air-delivery Rate upon Drying Rough Rice with Unheated Air.)

  • 이상우;정창주
    • 한국농공학회지
    • /
    • 제16권1호
    • /
    • pp.3293-3301
    • /
    • 1974
  • An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

  • PDF

북동 태평양 심해저 C-C 해역의 퇴적 환경과 대형저서동물 분포와의 관계 (Responses of Benthic Animals in Spatial Distribution to the Sedimentary Environments on the Deep-sea Floor, the Clarion-Clipperton Fracture Zone, Northeastern Pacific Ocean)

  • 박흥식;지상범;백상규;김웅서
    • Ocean and Polar Research
    • /
    • 제26권2호
    • /
    • pp.311-321
    • /
    • 2004
  • Relationships between sedimentary environments and abundance of benthic animals were examined on the deep-sea floor, the Clarion-Clipperton Fracture Zone, in the northeast equatorial Pacific Ocean. Specimens were collected using a box corer at 8 stations by sieving through 0.3 mm mesh screen. Sediments showed finer grain size ranged from 5.63 to $7.97{\varphi}$, 83.1% of mean porosity, 1.81 kPa of mean shear strength and organic carbon content in sediment ranged from 0.97 to $1.87\;mg/cm^3$. Manganese nodules covered on the bottom layer from 4 to 57% of coverages. A total of 26 faunal groups in 6 phyla was sampled and comprised 1,467 individuals. Mean biomass were calibrated to 0.5 gWWt/$0.06\;m^2$. Small-sized animals including foraminiferans and nematods were dominated among the faunal group which comprised 49.1% (892 ind.) and 11.5% (320 ind.), respectively. In SPI-analysis, vertical bio-disturbance marks were not observed except to Beggiatoa-type bacterial mats. As the results of relationship between environments and benthos, abundance of benthic animals, especially nematode, showed only a negative correlation to the coverage of nodules, and any other sedimentary factors analyzed in this study were rarely affected to the spatial distribution of benthic animals.

한국 동해 대륙붕 및 대륙사면에서의 다모류 분포 (Distribution Pattern of Polychaete Worms on the Continental Shelf and Slope of the East Sea (Southwestern Sea of Japan), Korea)

  • 최진우;고철환
    • 한국해양학회지
    • /
    • 제25권1호
    • /
    • pp.36-48
    • /
    • 1990
  • 본 연구는 동해의 대륙붕 및 대륙사면에서의 다모류 군집의 종 조성과 분포을 알 기 위해 수행되었다. 다모류의 채집은 1985년 4월에 1987년 4월, 10월의 3회의 항해 동안 이루어졌다. 채집된 다모류는 총 36과 112 종이었으며, 우점다모류는 Chaetozone setosa, Aglaophanus malmgrent Ampharete arctica Lerchellules horikoshii, Tharyx sp., 와 Magelona pacifica 등이었다. 본 조사지역의 다모류 군집에 대한 주요 기여종 들은 복반부의 냉수종들이었다. 특히 우점종들은 대륙붕에서부터 대륙사면 상부 혹은 중부에서 주로 분포하며, 특정 서식 깊이를 보였다. 전반적인 평균서식밀도를 300개체 / m$^2$이며, 송풍부도는 15종/0.2 m$^2$ 정도이다. 평균서믹밀도와 종풍부도지수는 600 m 나 그 이상의 수심에서 뚜렷한 변화를 보였다. 우점종의 평균서식밀도와 밀접한 상관 관계를 보인 물리적 환경은 수심, 수온, 니질함량, 평균입도 등이었다.

  • PDF