• Journal of East-West Nursing Research
• /
• v.1 no.1
• /
• pp.22-39
• /
• 1997

Purpose: The purpose of this study is to evaluate the effect of rehabilitation education on the reduction of the stress of family members who have patients suffering from stroke and to find a new way to nurse the patients and their family. Subjects & Methods: The subjects were sixty-one family members with the patients who had been hospotalized in K hospital of oriental medicine from september the 9th, 1996 to september the fourteen, 1996. This study was performed by simulated control group pretest-posttest design; pretest was done on the control group through a questionnaire, counselling and observation while posttest was done on the experimental group 1-2 days after systemic rehabilitation education. To teach the patients and their family, the amended version of a book written by Lee Hae-jin was used as a tool for systemic rehabilitation education. As a method to estimate ADL score, modified Kang's method was applied and ADL score was measured by well-trained technician. As for the tool to estimate the degree of family stress, Choi's method adjusted to this study was applied. In the analysis of the data, social property of the patient and the characteristic of the disease were surveyed in $X^2$ examination to confirm the consistency between the experimental group and the control group. The diffrence in the degree of the stress, which is a dependent factor, was examined by t-test. The difference in ADL score between the experimental group and the control group was examined by t-test. The difference in the degree of the stress according to the general feature of the family with stroke patient, social property of the patients and the characteristic of the disease were surveyed by F examination. The difference in family stress according to the degree of ADL was surveyed by F examination. RESULTS: 1. After hypothetically-examined systemic rehabilitation education, the total of the score of family stress surveyed in 34 items of three domains was compared between the experimental group and the control group. There was no statistically significant difference between two groups; mean score of experimental group=2.28, that of control group=2.93(t=.17, df=59, p=. 66). 2. In the survey on family stress in 34 items, the items over mean score 3.0 were firstly the anxiety of possible disability and relapse of the disease and secondly to watch the patient's suffering without doing anything in the domain of the change of the disease and the difficulty in caring. And the items of the lowest stress with less than mean 2.0 score were little chance to meet the relative and friends, inconsistent treatment and attitude of the medical workers and the change of the attitude of the relative due to the patient orderly in the domain of social and personal relation and the responsibility as the family. The items which showed the difference between two groups were aggravation of neighboring patient(t=3.36, df= 59, p=.001) and the possibility of patient's death(t=2.19, df=58.38, p=.033) in the domain of the change of the disease and the difficulty in caring. 3. In the study on the stress difference according to general features of the family with the stroke patient, the score of family stress with the occupation was higher with mean 2.49 than that of the family stress without occupation with mean 2.16, but there was no significant difference. (F=5.21, df=1/59, p=.026). 4. In the study on the stress difference according to social property of the patient and the characteristic of the disease, there was significant difference in the age of the patients (F=2.98, df=3/57, p=.039). These results show that even if there is no statistically significant difference between two groups, sixteen of the experimental group are less than 3.0 in ADL score(standard 6 score)while eight of the control group are less than 3.0 and that ten of the experimental group are in the year range of 39-49 while four of the control group are in the year range of 39-49 which showed significant difference in family stress. These imply that there is a possibility that the experimental group have serious and fundamental stress resulting in high pretest stress compared with the control group. It might be due to the characteristic of simulated control group pretest-posttest design that the psychologic-supportive effect by the education was not observed. On the basis of these results, the followings are suggested. 1) A study on the nursing-mediated method to reduce the stress in the items which are not resolved by rehabilitation education, a study on nursing according to the patient's age and a study on the supportive nursing toward the family with occupation are required. 2) More than two times consecutive nursing-mediated rehabilitation education to measure the family stress is required. 3) Comprehensive and multilateral systemic education program including the instruction on western-eastern medicine, physical therapy, exercise and diet through collaboration of the experts in each field is required. 4) Family stress at home as well as in the hospital needs to be estimated and home rehabilitation and home-nursing needs to be continued.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.25-33
• /
• 2023

Noise generated during the acquisition and transmission of CT images acts as a factor that degrades image quality. Therefore, noise removal to solve this problem is an important preprocessing process in image processing. In this paper, we remove noise by using a deformable convolutional autoencoder (DeCAE) model in which deformable convolution operation is applied instead of the existing convolution operation in the convolutional autoencoder (CAE) model of deep learning. Here, the deformable convolution operation can extract features of an image in a more flexible area than the conventional convolution operation. The proposed DeCAE model has the same encoder-decoder structure as the existing CAE model, but the encoder is composed of deformable convolutional layers and the decoder is composed of conventional convolutional layers for efficient noise removal. To evaluate the performance of the DeCAE model proposed in this paper, experiments were conducted on CT images corrupted by various noises, that is, Gaussian noise, impulse noise, and Poisson noise. As a result of the performance experiment, the DeCAE model has more qualitative and quantitative measures than the traditional filters, that is, the Mean filter, Median filter, Bilateral filter and NL-means method, as well as the existing CAE models, that is, MAE (Mean Absolute Error), PSNR (Peak Signal-to-Noise Ratio) and SSIM. (Structural Similarity Index Measure) showed excellent results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.1-16
• /
• 1996

This study was conducted at an automobile assembly line located in Kyonggi-do, Korea from January 16 to February 28, 1995. The purposes of this study were to assess worker exposures to hand-arm vibration and the performance of gloves for reduction of vibration. The exposure to vibration was measured using to the ISO 5349(1986) method. Vibration acceleration and frequency spectra for each tool were determined on-line replicating actual working conditions and analyzed together with exposure time for evaluating individual worker exposure. Eight pneumatic hand tools, 60 workers exposured to hand-arm vibration, and three pairs of gloves were involved in this study. Results are summarized as follows. 1. Dominant frequencies of vibration for all tools(n=8) measured in this study ranged from 250 Hz to 800 Hz. 2. There was no significant correleration between dominant frequencies and free running speed (p>0.05). 3. Total predicted exposure times of using impact, hammer type did not exceed 40 minutes, but metal finish task, using grinder and sander exceeded 40 minutes. Total exposure time affected significantly the frequency-weighted, 4 hr equivalent acceleration. 4. Predicted prevalence and observed exposure period data were compared in workers(n=60), according to ISO 5349. In this results, 23(50.0 %) and 24(48.07 %) persons exceeded the mean latency periods for vibration-induced white finger(VWF) at 10 % (n=46) and 50 % (n=52) standards, respectively. On the basis of ISO equation, mean latent periods for VWF were 3.23, 4.72 years at 10 %, 50 % standards, respectively. 5. Reduction of vibration by gloves was evaluated. Since impact pneumatic tools produced low frequency vibrations, conventional gloves did not provide any protection. Gloves A and C amplify somewhat the signal at frequency below 400 Hz; the attenuation increases progressively by frequency to reach 18 dB ($7.94{\times}10^{-6}m/s^2$) at 1,000 Hz, slightly worsening Glove B did not provide any protection and made the situation slightly worse. However, since they make the hands warm, the occurrence of vibration-induced white fingers may be reduced.

• Journal of the Korean Dietetic Association
• /
• v.4 no.2
• /
• pp.235-244
• /
• 1998

Hand washing is an important component of hygiene program for food handlers. Hands can be a source of direct or indirect contamination of foods with pathogenic microorganisms. In this study, the effectiveness of hand washing methods and the use of 70% alcohol solution against transient skin bacteria was tested in an university foodservice facility. 70% alcohol solution is sprayed for 5 seconds automatically when hands are placed in the dispenser. Samples were taken using swab technique in meat cutting area, vegetable trimming area, and vegetable cutting area: before and after washing hands according to planned methods, and after being sprayed with 70% alcohol solution after washing hands. The bacteriological analysis of total plate counts, coliform, fecal coliform of food handlers' hands was done. Statistical data analysis was completed with Mann-Whitney U test and Kruskal-Wallis model using the SPSS program. The levels of initial contamination of workers' hand were significantly different by the work areas($x^2$=9.156, p<0.01). Workers in the vegetable trimming area had more heavily soiled hands than in the other work areas. Mean of TPC counts and coliform was 8.97×$10^5$ CFU/12.4$cm^2$, 2.93×$10^2$ MPN/12.4$cm^2$ respectively, but fecal coliform was not detected. Transient bacteria were removed from hands after washing and using 70% alcohol solution but were not removed completely. Mean reduction percentage in TPC varied among work areas and ranged from 93.19% to 94.99%, and in coliforms from 97.31% to 100%. A significant difference in TPC was found between before and after hand disinfection (Z=-2.714, p<.01) and between standardized hand washing procedures and un-standardized hand washing procedures(z=-2.301, p<.01). Subjects using the hand sanitizer showed a great elimination of TPC(99.45% reduction), but this effect was valid only after following proper washing procedures. Based on the results, the most effective hand washing method was recommended as the combination of the standardized hand washing procedure with warm-water and use of the 70% alcohol solution. The results can be used to develop hand hygiene programs and training strategies for enhancing hand hygiene practices for food handlers in foodservice operations.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.1
• /
• pp.11-17
• /
• 2015

Purpose: To report the radiographic and clinical results of 6.5 mm cancellous full threaded buttress screw or Steinmann pin fixation to maintain a reduction of calcaneal posterior facet depression fracture. Materials and Methods: From June 2009 to June 2012, 50 consecutive cases with calcaneal joint depression fracture that underwent open reduction and screw or pin fixation were enrolled in this study. A 6.5 mm cancellous full threaded screw was inserted from the posteroinferior aspect of the calcaneal tuberosity to the posterior facet (group A) or Steinman pin was inserted from the posterosuperior aspect of the calcaneal tuberosity to the calcaneocuboidal joint (group B). Both preoperative and postoperative Bohler and Gissane angles were measured radiographically, and American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot scale on the final follow-up were assessed. Results: The mean age of patients was 44.1 years, and the mean follow-up period was 27.2 months. According to the Sanders classification, 28 cases were type II and 22 cases were type III. In Sanders type II, Bohler and Gissane angles improved significantly from $10.1^{\circ}$ and $126.2^{\circ}$ preoperatively to $27.2^{\circ}$ and $117.1^{\circ}$, respectively, in the immediate postoperative radiograph, and at the final follow-up, $26.6^{\circ}$ and $118.6^{\circ}$, respectively. In Sanders type III, Bohler and Gissane angles improved significantly from $5.0^{\circ}$ and $129.8^{\circ}$ to $29.9^{\circ}$ and $119.3^{\circ}$, respectively, in the immediate postoperative radiograph, and $26.9^{\circ}$ and $120.2^{\circ}$ at the final follow-up. All cases achieved bony union, and the average period until complete union was 13.3 weeks. AOFAS ankle-hindfoot scale was 82.6 in Sanders type II and 77.3 in Sanders type III at the final follow-up. Conclusion: A 6.5 mm cancellous full threaded buttress screw or Steinman pin fixation is a noninvasive treatment method with a merit of being able to maintain the bearing capacity of the posterior facet comparable to plate fixation.

• Journal of Korean Foot and Ankle Society
• /
• v.20 no.2
• /
• pp.67-72
• /
• 2016

Purpose: The purpose of this study was to assess the 2-year follow-up results of patients with a trimalleolar fracture, who had undergone an anterior incision cannulated screw fixation of the posterior malleolar fragment, which had more than 25% of articular involvement or had no cortical continuity with the distal tibia. Materials and Methods: Among 28 patients with a trimalleolar fracture who had undergone fixation of the posterior malleolar fragment between February 2005 and February 2010, 14 patients, who underwent an anterior incision cannulated screw fixation of posterior malleolar fragment and were followed-up for more than 2 years, were selected. The postoperative clinical and radiological findings immediately and at the 1- and 2-year follow-up were compared. The clinical findings were evaluated as American Orthopaedic Foot and Ankle Society (AOFAS) score. The radiological assessment was evaluated as the maintenance of reduction, period to bone union, and the presence of nonunion, malunion, and complications. Results: The clinical outcome by mean AOFAS score revealed 83.0 points in the group with preoperative displacement below 2 mm and 80.7 points in the group with preoperative displacement above 2 mm postoperatively. The mean AOFAS score was 91.7 and 93.1 points in the group with preoperative displacement below 2 mm on 1- and 2-year follow-up, respectively, and 89.8 and 91.7 points in group with the preoperative displacement above 2 mm on 1- and 2-year follow-up, respectively. After a 2-year follow-up among 14 cases selected for this study, 13 cases showed an excellent reduction state and only 1 case (7.1%) showed a displacement of more than 2 mm. No complication were encountered in the group with preoperative displacement below 2 mm. On the other hand, among 8 patients in the group with preoperative displacement above 2 mm, there were 3 with limitations of the range of motion of the ankle joint (37.5%) and 1 post-traumatic arthritis (12.5%) at the 2-year follow-up. Conclusion: Anterior incision cannulated screw fixation of the posterior malleolar fragment could be a valuable method for the treatment of trimalleolar fractures that provides satisfactory results.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.825-848
• /
• 2022

This paper analyzed the factors for increasing energy consumption in the domestic manufacturing sector using the LMDI (Log mean division index) decomposition method for the period from 1999 to 2019. Among the LMDI decomposition analysis methods, both additive and multiplicative factor decomposition methods were used. in this analysis. According to the result of the analysis, the factor that increased energy consumption in the domestic manufacturing industry was the production effect, and the structure effect and intensity effect were found to be the factors that decreased energy consumption. In particular, the reduction of energy consumption due to the structure effect was greater than that of energy consumption effect due to the intensity effect. By period, it can be seen that energy consumption increased rapidly due to the production effect until 2011, but after that, the increase in energy consumption due to the production effect slowed down. On the other hand, after that, the energy reduction effect due to the structure effect and the intensity effect became prominent. In order to save energy in the manufacturing sector in the future, energy diagnosis and management through EMS (Energy management system) and FEMS (Factory energy management system) are more necessary. In addition, restructuring into a low-energy consumption industry seems more necessary.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.1
• /
• pp.23-30
• /
• 1980

The reconstruction problem in a low dose case requires some compromise of resolution and noise artifacts, and also some modification of filter kernels depending on the signal-to-noise ratio of projection data. In this paper, ail algorithm for the reconstruction of an image function from noisy projection data is suggested, based on minimum-mean-square error criterion. Modification of the falter kernel is made from information (statistics) obtained from the projection data. The simulation study Proves that this algorithm, based on the Wiener falter approach, provides substantially improved image with reduction of noise as well as improvement of the resolution. An approximate method was also studied which leads to the possible use of a recursive filter in the convolution process of image reconstruction.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.320-328
• /
• 2011

The down town passage segment which follows in the straight line which follows recently in high speed of the railway and rail construction is increasing. Also according to quality of life improvement of the citizens whom follows in national income increase the resident demand only becomes larger day by day about a environmental creation which is comfortable and house environmental etc. Demand of the citizens is not the problem of today yesterday about like this railway mean of transportation and with the fact that continuously will increase in future. This study is to predict and reduce railway noise from the conventional PSC-beam bridges which passes through urban areas under the government strateges of speed and weight increases of railway. The purpose of this study is to recommend a proper noise prediction method for designing pleasant roadside environments. The railway design including existing line reconstructions should minimize curved alignment to increase train speed to 180~200km/hr under the government's long-term planing such as the 4th Comprehensive National Development Plan (2000~2020), National Intermodal Transportation Plan (2000~2019) and National Railroad Network Establishment Plan (2006~2015), Since the PSC-beam bridges are mainly used for bridge structures urban areas, noise measurements were performed and analyzed to recommend the noise prediction methods for each type and speed of train respectively.

• ETRI Journal
• /
• v.25 no.2
• /
• pp.109-120
• /
• 2003

Though the airborne laser scanning (ALS) technique is becoming more popular in many applications, horizontal accuracy of points scanned by the ALS is not yet satisfactory when compared with the accuracy achieved for vertical positions. One of the major reasons is the drift that occurs in the inertial measurement unit (IMU) during the scanning. This paper presents an algorithm that adjusts for the error that is introduced mainly by the drift of the IMU that renders systematic differences between strips on the same area. For this, we set up an observation equation for strip-wise adjustments and completed it with tie point and control point coordinates derived from the scanned strips and information from aerial photos. To effectively capture the tie points, we developed a set of procedures that constructs a digital surface model (DSM) with breaklines and then performed feature-based matching on strips resulting in a set of reliable tie points. Solving the observation equations by the least squares method produced a set of affine transformation equations with 6 parameters that we used to transform the strips for adjusting the horizontal error. Experimental results after evaluation of the accuracy showed a root mean squared error (RMSE) of the adjusted strip points of 0.27 m, which is significant considering the RMSE before adjustment was 0.77 m.