• Title/Summary/Keyword: Mean Center

Search Result 6,929, Processing Time 0.032 seconds

Reynolds number effect on the flow past two tandem cylinders

  • Derakhshandeh, Javad Farrokhi;Alam, Md. Mahbub
    • Wind and Structures
    • /
    • v.30 no.5
    • /
    • pp.475-483
    • /
    • 2020
  • This work investigates Reynolds number Re (= 50 - 200) effects on the flows around a single cylinder and the two tandem (center-to-center spacing L= L/D = 4) cylinders, each of a diameter D. Vorticity structures, Strouhal numbers, and time-mean and fluctuating forces are presented and discussed. For the single cylinder, with increasing Re in the range examined, the vorticity magnitude, Strouhal number and fluctuating lift all monotonically rise but time-mean drag, vortex formation length, and lateral distance between the two rows of vortices all shrink. For the two tandem cylinders, the increase in Re leads to the formation of three distinct flows, namely reattachment flow (50 ≤ Re ≤ 75), transition flow (75 < Re < 100), and coshedding flow (100 ≤ Re ≤ 200). The reattachment flow at Re = 50 is steady. When Re is increased from 75 to 200, the Strouhal number of the two cylinders, jumping from 0.113 to 0.15 in the transition flow regime, swells to 0.188. The two-cylinder flow is more sensitive to Re than the single cylinder flow. Fluctuating lift is greater for the downstream cylinder than the upstream cylinder while time-mean drag is higher for the upstream cylinder than for the other. The time-mean drags of the upstream cylinder and single cylinder behaves similar to each other, both declining with increasing Re.

Estimation of Rotation Center and Rotation Angle for Real-time Image Stabilization of Roll Axis. (실시간 회전영상 안정화를 위한 회전중심 및 회전각도 추정 방법)

  • Cho, Jae-Soo;Kim, Do-Jong
    • Proceedings of the KIEE Conference
    • /
    • 2004.11c
    • /
    • pp.153-155
    • /
    • 2004
  • This paper proposes a real-time approach on the rotational motion estimation and correction for the roll stabilization of the sight system. This method first estimates a rotation center by the least-mean square algorithm based on the motion vectors of some feature points. And, then, a rotation angle is searched for a best matching block between a reference block image and seccessive input images using MPC(maximum pixel count) matching criterion. Finally, motion correction is performed by the bilinear interpolation technique. Various computer simulations show that the estimation performance is good and the proposed algorithm is a real-time implementable one to the TMS320C6415(500MHz) DSP.

  • PDF

Performance and parameter region for real time use in IEEE 802.4 token bus network

  • Park, Hong-Seong;Kim, Deok-Woo;Kwon, Wook-Hyun
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1991.10b
    • /
    • pp.1805-1810
    • /
    • 1991
  • This paper derives the upper and the lower bound of the mean cycle time and the mean service time of the class 6 and the class 4, within which the minimum utilization constrain of the class 4 is guaranteed. Also, derived are conditions under which the token bus network is stable or unstable. These bounds and stable conditions are represented in terms of the high priority token hold time, the token rotation time and the arrival rate and the total station number etc. This paper suggest a parameter tuning algorithm in a partially symmetric token bus network with two classes, which maximizes the token rotation time for a suitable high priority token hold time and at the same time meets the stability condition of the network, the real time constraint and the minimum utilization constraint of the class 4.

  • PDF

Successful Superovulation and Recovery of Embryos in Repeat Breeding Crossbred Cows

  • Zawar, Shyam;Mishra, U.K.;Gaswade, P.G.
    • Journal of Embryo Transfer
    • /
    • v.17 no.3
    • /
    • pp.235-238
    • /
    • 2002
  • The present study was undertaken to find out possibilities for superovulation and recovery of freezable/transferable embryo from repeat breeding crossbred cows. For this study a total of 10 Holstein crossbred cows having history of failure of conception even after more than 4~5inseminations were taken and superovulated using Folltropin-V at 100 to 140% dose schedule. The results indicated that out of 10 donors, 8 responded to superovulatory treatment and yielding a total of 94 embryos, out of which 45 were of transferable/freezable quality. The mean ovulations and mean transferable embryos were 11.5$\pm$2.91 and 4.5$\pm$1.66, respectively. These observations suggests that the repeat breeding cows having conception failure after several artificial inseminations can be used as donors for production of embryos and calves through embryo transfer technology.

NORMAL TEMPOROMANDIBULAR JOINT SPACE (정상인의 악관절 간극)

  • Kim, Joon-Bae
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.26 no.3
    • /
    • pp.279-283
    • /
    • 2000
  • Disc displacement, deformation, perforation or osteoarthritis may induce the joint space narrowing. This study was designed to get the normal joint space width which could be used as a standard comparing with damaged joints. Twenty asymptomatic volunteers' MR images were evaluated and coronal images of thirty joints having normal disc position in sagittal and coronal views, were selected. The joint spaces were measured at center, medial and lateral side on the coronal views. In normal joints, the mean joint space was $3.57{\pm}0.63mm$ at center, $2.77{\pm}0.51mm$ at medial and $2.41{\pm}0.41mm$ at lateral side of mandibular condyle. The mean of joint space of male was wider than that of female at center, but not significantly different at medial and lateral side of the condyle.

  • PDF

Unsteady Analysis of Indoor Radon in Apartment Buildings Considering Finishing Materials and Ventilation (마감재 및 환기를 고려한 공동주택 실내 라돈 농도의 비정상 해석)

  • Cho, Hyun;Pang, Seung-Ki
    • Journal of the Korean Society for Geothermal and Hydrothermal Energy
    • /
    • v.15 no.4
    • /
    • pp.24-31
    • /
    • 2019
  • In this paper, we simulated a new apartment building by using radon emission test values from various building materials used as interior finishing materials. The simulations evaluated the radon concentration in the room according to the radon emissions and the ventilations for each type of finishing material (gypsum board, stone, tile and concrete). Overall concrete finish simulation case showed the highest concentration than the case using other materials due to the effect of wall area at the center of each room and the mean radon concentration at 1.5 m above the floor was slightly lower than the mean value at each center. In the case of the porch, pantry and bathroom, the radon concentration was high even when the same materials were used as in the other rooms.

Active Control of Road-Booming-Noise with Constraint Multiple Filtered-X LMS Algorithm

  • Oh, Shi-Hwan;Kim, Hyoun-Suk;Park, Young-Jin
    • The Journal of the Acoustical Society of Korea
    • /
    • v.19 no.2E
    • /
    • pp.3-7
    • /
    • 2000
  • Vibration generated by the non-uniform road profile propagates though each tire and the suspension and finally generates structure born noise in the interior of the passenger vehicle. In this paper, the road-booming-noise which has strong correlation with the vibration signals measured at the suspension system was compensated. Active noise control of the road-booming-noise is rather difficult to achieve because of its non-stationary characteristics. CMFX LMS (Constraint Multiple Filtered-X Least Mean Square) algorithm, which can track non-stationary process rather well, is applied. Comprison of the proposed method and the conventional MFX LMS (Multiple Filtered-X Least Mean Square) algorithm is made through the hardware-in-the-loop simulation and the feasibility of the proposed method is demonstrated with the experiment.

  • PDF

Voice conversion using low dimensional vector mapping (낮은 차원의 벡터 변환을 통한 음성 변환)

  • Lee, Kee-Seung;Doh, Won;Youn, Dae-Hee
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.4
    • /
    • pp.118-127
    • /
    • 1998
  • In this paper, we propose a voice personality transformation method which makes one person's voice sound like another person's voice. In order to transform the voice personality, vocal tract transfer function is used as a transformation parameter. Comparing with previous methods, the proposed method can obtain high-quality transformed speech with low computational complexity. Conversion between the vocal tract transfer functions is implemented by a linear mapping based on soft clustering. In this process, mean LPC cepstrum coefficients and mean removed LPC cepstrum modeled by the low dimensional vector are used as transformation parameters. To evaluate the performance of the proposed method, mapping rules are generated from 61 Korean words uttered by two male and one female speakers. These rules are then applied to 9 sentences uttered by the same persons, and objective evaluation and subjective listening tests for the transformed speech are performed.

  • PDF

The Effect of Buoyancy Orientation on Flow Structures in Turbulent Channel Flow using DNS

  • El-Samni Osama;Yoon HyunSik;Chun Ho Hwan
    • Journal of Ship and Ocean Technology
    • /
    • v.9 no.4
    • /
    • pp.1-10
    • /
    • 2005
  • The effect of buoyancy orientation on turbulent channel flow has been investigated using DNS (direct numerical simulation). Grashof number is kept at 9.6 $\times 10^{5}$ while changing the orientation of the buoyancy vector to be parallel or perpendicular to the channel walls. Four study cases can be distinguished during this research namely; streamwise, wall-normal unstable stratification, wall-normal stable stratification and spanwise oriented buoyancy. The driving mean pressure gradient used in all cases is adjusted to keep mass flow rate constant while friction Reynolds number is around 150. At this Grashof number, the skin friction shows decrement in the unstable and stable stratification and increment in the other two cases. Analyses of the changes of flow structure for the four cases are presented highlighting on the mean quantities and second order statistics.

Convalescence from Saturday Night Palsy (요골신경 압박마비의 회복)

  • Rhee, Seung-Yong;Han, Soo-Hong;Lee, Soon-Chul;Lee, In-Sung;Kim, Jin-Woo
    • Archives of Reconstructive Microsurgery
    • /
    • v.21 no.2
    • /
    • pp.81-85
    • /
    • 2012
  • Purpose: Saturday night palsy is a transient form of nerve palsy that occurs after a prolonged period of direct pressure on the course of radial nerve by one's own or spouse's head. Although commonly encountered, there have been only few studies concerning its convalescence. The purpose of this study is to predict the prognosis of Saturday night palsy based on the causes, time to recovery and degree of recovery. Materials and Methods: Retrospective study of 20 patients who were diagnosed compression radial nerve palsy was performed. The average age was 36.7 years old and the mean follow-up period was 19.6 months. We investigated sleeping hours as an indirect measure of nerve compression time, recovery of wrist and finger extension, DASH score on the monthly based follow up. Results: The mean sleeping hours was 5.8 hours and all patients showed full recovery of wrist and fingers extension with the mean duration of symptom for 3.2 months. DASH score was an average 1.53 at the last follow up and we found no statistical significance between the time to recovery and the sleeping hours. Conclusion: Complete natural recovery can be expected in compression radial nerve palsy in this study without correlation with sleeping time. Accurate diagnosis is important in order to avoid unnecessary therapeutic intervention and further study should be accomplished for clarifying the related prognostic factors in larger scale of the cases.

  • PDF