• Smart Structures and Systems
• /
• 제23권1호
• /
• pp.31-44
• /
• 2019

The present study investigate the compressive stress, shear stress, tensile stress, vertical electrical displacement and horizontal electrical displacement induced due to a load moving with uniform velocity on the free rough surface of an irregular transversely isotropic functionally graded piezoelectric material (FGPM) substrate. The closed form expressions ofsaid induced stresses and electrical displacements for both electrically open condition and electrically short condition have been deduced. The influence of various affecting parameters viz. maximum depth of irregularity, irregularity factor, parameter of functionally gradedness, frictional coefficient of the rough upper surface, piezoelectricity/dielectricity on said induced stresses and electrical displacements have been examined through numerical computation and graphical illustration for both electrically open and short conditions. The comparative analysis on the influence of electrically open and short conditions as well as presence and absence of piezoelectricity on the induced stresses and induced electrical displacements due to a moving load serve as the salient features of the present study. Moreover, some important peculiarities have also been traced out by means of graphs.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.96-100
• /
• 2006

In this thesis, the crack investigation, the damage investigation, the drawing check, and the structural analysis were performed on a curved hollow RC(reinforced concrete) slab bridge structure to assess the structural safety of that. From the crack investigation result, main reason of crack occurrence is guessed with travelling of the large truck. Therefore reinforcement of slab structure is necessary by using the steel plate. When structural analysis, the straight beam model, the curved beam model, and the curved plate model is used. From the results of structural analysis for curved hollow RC slab bridge, the maximum bending moment and the maximum shear force was not a difference in each models. But the vertical displacement of mid span using the curved beam model was greater than that using the other models.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.623-633
• /
• 2019

A large number of available concrete buildings designed only considering gravity load that require seismic rehabilitation because of failure to meet plasticity criteria. Using steel bracings are a common type of seismic rehabilitation. The eccentric bracings with vertical link reduce non-elastic deformation imposed on concrete members as well as elimination of probable buckling problems of bracings. In this study, three concrete frames of 10, 15, and 20 stories designed only for gravity load have been considered for seismic improvement using performance-based plastic design. Afterwards, nonlinear time series analysis was employed to evaluate seismic behavior of the models in two modes including before and after rehabilitation. The results revealed that shear link can yield desirable performance with the least time, cost and number of bracings of concrete frames. Also, it was found that the seismic rehabilitation can reduce maximum relative displacement in the middle stories about 40 to 80 percent. Generally, findings of this study demonstrated that the eccentric bracing with vertical link can be employed as a suitable proxy to achieve better seismic performance for existing high rise concrete frames.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.29-39
• /
• 2007

This study were obtained elapsed time phase-by-phases, displacement, user angle, velocity and angular velocity to analyse kinematically contributing factors at impact of forehand drive motion, on targeting three male players. The results of the study were presented as follows; In the forehand drive swing, the elapsed time by phases was a total of .52 seconds: .30 seconds from backswing to impact and .22 seconds from impact to follow-through, Considering the mean change in locations of COM of each(part$\rightarrow$body segment) at impact, racket head, left shoulder, right wrist and left hip, the left-right directions(X-axis) were showm to be each $.61{\pm}.03$, $1.19{\pm}.08$, $.66{\pm}.03$, $.94{\pm}.06$, and $.45{\pm}.03m$. The displacement differences of COM of each body segment were shown to be -.57, -.05, -.33, and .16m. For the vertical direction(Z-axis), the center of mass was lowest at impact and highest at E3. For the displacement of the right wrist on the left hip, the right wrist moved to .82m to the lower direction without change in the locations of the hip from E1 from E2. When the left hip moved .02m from E2 to E3, the right wrist moved .7m in the upper direction. In respect to the velocity of each body segment, the hip and the shoulder joint accelerated and then the wrist followed. Then the right wrists of all the subjects and their racket heads showed maximum speed, and an effective swing was observed. At the angle of each part, the angle of the right wrist was the smallest at the backswing and the largest at the moment of the impact. Then it increased gradually in the follow-through section. In respect of angular velocity for subject A, the hip moved and the largest change occurred. Immediately before the impact, the subject made a swing using his right wrist, his hip, and the shoulder joint, showing the maximum value, which was judged to be effective.

• 한국지진공학회논문집
• /
• 제21권5호
• /
• pp.215-226
• /
• 2017

In this paper, an experimental study was carried out for vibration control of cable bridges with structurally flexible characteristics. For the experiment on vibration control, a model bridge was constructed by reducing the Seohae Grand Bridge and the shear type MR damper was designed using the wind load response measured at Seohae Grand Bridge. The shear type MR damper was installed in the vertical direction at the middle span of the model bridge, and dynamic modeling was performed using the power model. The tests of the vibration control were carried out by non-control, passive on/off control and Lyapunov control method on model bridge with scaled wind load response. The performance of the vibration control was evaluated by calculating absolute maximum displacement, RMS displacement, absolute maximum acceleration, RMS acceleration, and size of applied power using the response (displacement, acceleration, etc.) from the model bridge. As a result, the power model was effective in simulating the nonlinear behavior of the MR damper, and the Lyapunov control method using the MR damper was able to control the vibration of the structure and reduce the size of the power supply.

• 한국지반공학회논문집
• /
• 제19권3호
• /
• pp.5-13
• /
• 2003

쏘일네일링 공법은 작업공간의 확보가 용이하고 네일길이가 어스앵커보다 비교적 짧아 도심지 지하굴착에 매우 이로운 장점이 있다. 이 공법이 도입된 이후 쏘일네일링 벽체의 거동에 관한 연구는 토조에 의한 모형실험과 이론적 연구가 진행되고 있지만 지반조건이 다층토로 구성된 현장에 대한 연구는 미흡한 실정이다. 본 연구는 국내 다층토 지반에 시공된 쏘일네일링 현장에서 시공중 측정된 수평변위를 토대로 한 역해석적 방법에 의해 배면지반의 이완영역거리와 이완영역계수를 고찰하였다. 연구결과에 의하면 쏘일네일링 벽체 배면지반의 이완 영역거리는 최종굴착깊이의 증가에 따라 증가함을 보였으며, 그 비율은 최종굴착깊이의 94% 정도로 나타났다. 토사층과 암층이 혼합되어 있는 다층토 지반에서 토사층의 비율이 클수록 이완영역계수도 증가하였으나, 약 1.05값에서 수렴하는 경향을 나타냈다. 벽체 최대수평변위에 대한 지표면 최대수직변위와의 관계는 역해석결과에서 지표면 최대수직변위가 최대수평변위의 80%이하로 나타났으며, Caspe방법에 의한 지표면 최대수직변위는 최대수평변위의 150~280%의 범위로 나타나 역해석결과보다는 매우 큰 값을 나타내 Caspe방법이 매우 보수적임을 확인하였다.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.85-95
• /
• 2005

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle during One Hand Backhand Stroke and Two Hand Backhand in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head direction were defined. 1. In three dimensional maximum linear velocity of racket head the X axis and Y axis(horizontal direction) showed $-11.04{\pm}2.69m/sec$, $-9.31{\pm}0.49m/sec$ before impact, the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball. It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. The stance distance between right foot and left foot was mean $75.4{\pm}5.86cm$ during one hand backhand stroke and $72.6{\pm}4.67cm$ during two hand backhand stroke. 2. The three dimensional anatomical angular displacement of trunk in interna rotation-external rotation showed most important role in backhand stroke. and is follwed by flexion-extension. the three dimensional anatomical angular displacement of trunk did not show significant difference between one hand backhand stroke and two hand backhand stroke but the three dimensional anatomical angular displacement of trunk was bigger than one hand backhand stroke. 3. while backhand stroke, the flexion-extension and adduction-abduction of right shoulder joint showed significant different between one hand backhand stroke and two hand backhand stroke. the three dimensional anatomical angular displacement of right shoulder joint showed more flex and abduct in one hand backhand stroke. 4. The three dimensional anatomical angular displacement of left shoulder showed flexion, adduction, and external rotation at impact. after impact, The angular displacement as adduction-abduction of left shoulder changed motion direction as abduction. angular displacement of left shoulder as flexion-extension showed bigger than the right shoulder.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.161-173
• /
• 2005

Recently among several tennis techniques forehand stroke has been greatly changed in the aspect of spin, grip and stance. The most fundamental factor among the three factors is the stance which consists of open, square and closed stance. The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle according to open stance patterns during forehand stroke in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVlEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head angle were defined 1. In three dimensional maximum linear velocity of racket head the X axis showed $11.41{\pm}5.27m/s$ at impact, not the Y axis(horizontal direction) and the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. the stance distance between right foot and left foot was mean $74.2{\pm}11.2m$. 2. The three dimensional anatomical angular displacement of shoulder joint showed most important role in forehand stroke. and is followed by wrist joints, in addition the movement of elbow joints showed least to the stroke. The three dimensional anatomical angular displacement of racket increased flexion/abduction angle until the impact. after impact, The angular displacement of racket changed motion direction as extension/adduction. 3. The three dimensional anatomical angular displacement of trunk in flexion-extension showed extension all around the forehand stroke. The angular displacement of trunk in adduction-abduction showed abduction at the backswing top and adduction around impact. while there is no significant internal-external rotation 4. The three dimensional anatomical angular displacement of hip joint and knee joint increased extension angle after minimum of knee joint angle in the forehand stroke, The three dimensional anatomical angular displacement of ankle joint showed plantar flexion, internal rotation and eversion in forehand stroke. it could be suggest that the plantar pressure of open stance during forehand stroke would be distributed more largely to the fore foot. and lateral side.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.344-350
• /
• 2013

본 연구는 200 W급 자이로밀형 수직축 풍력터빈 로터 블레이드 형상에 대한 구조 안정성을 평가하기 위하여 단방향 유체-구조 연성 해석 기법(FSI: Fluid-Structure Interaction)을 적용한 구조해석을 수행하였다. 설계된 수치해석 모델에 대한 3차원 모델링 형상 데이터를 이용하여 격자를 생성하고, 풍력터빈 유동장에 대한 유동해석을 수행하여 구해진 압력데이터를 구조해석 모델에 맵핑한 후 단방향 유체-구조 연성 해석을 수행하였다. 단방향 유체-구조 연성 해석에서 평가되는 최대응력과 각 물성데이터의 항복강도기준으로 안정성을 평가하였다. 유동해석은 정격풍속 10 m/s와 극한 풍속 60 m/s에 대하여 수행하였다. 구조해석 결과로 최대변형량은 블레이드 상부 끝단 측면에서 나타나며, 최대등가응력은 블레이드 외면과 내부 보강재 부분, 스트럿 부분에서 나타나지만, 재료의 항복강도와 최대등가응력 비교시 안전율이 2.21이므로 구조적으로 안전함을 확인하였다.

• 한국지반공학회논문집
• /
• 제33권2호
• /
• pp.5-15
• /
• 2017

PHC-W 흙막이공법은 말뚝의 원형단면을 개량하여 전면부의 평면화로 지보재의 설치가 용이하며 중첩(over-lap)시공이 가능하여 차수와 수직도가 우수하고 H형강을 사용하지 않아 경제적인 흙막이공법이다. 지층조건이 다른 3가지 사례를 이용하여 수치해석을 실시하였다. N치가 30미만의 지층에서는 PHC-W흙막이 A 형, B 형 각각에서 10.5m, 11.0m정도 굴착 가능한 것으로 나타났다. N치가 30이상의 비교적 양호한 지반에서는 PHC-W흙막이 A 형, B 형 각각에서 17.0m, 19.5m정도 굴착 가능한 것으로 나타났다. 지층조건이 양호할수록 굴착 가능 깊이가 커지는 것으로 나타났고 수평변위는 작아지는 것으로 나타났으며, 휨강도 안전율은 낮아지는 것으로 나타났고 전단력 안전율도 낮아지는 것으로 나타났다.