• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.105-111
• /
• 2008

A typical AP (Access Point) selection policy is to select an AP based on the received signal strength indicator (RSSI), ignoring its load. If multiple stations are deployed densely at a particular area, a typical AP selection policy will bring about the overall network throughput degradation. This paper proposes a novel AP selection policy taking into consideration not only signal strength of the APs but also AP loads to avoid Hotspot congestion. An experiment on Alinker implementing proposed AP selection policy, demonstrates that the proposed policy achieves close to optimal load balancing and grants the maximum transmission rate to stations in comparison with SSF (Strongest-Signal-First) and LLF (Least-Loaded-First).

• Journal of Information Processing Systems
• /
• v.13 no.3
• /
• pp.500-517
• /
• 2017

In this paper, an improved zone-based routing protocol for heterogeneous wireless sensor networks is proposed. The proposed protocol has fixed the sized zone according to the distance from the base station and used a dynamic clustering technique for advanced nodes to select a cluster head with maximum residual energy to transmit the data. In addition, we select an optimal route with minimum energy consumption for normal nodes and conserve energy by state transition throughout data transmission. Simulation results indicated that the proposed protocol performed better than the other algorithm by reducing energy consumption and providing a longer network lifetime and better throughput of data packets.

• ETRI Journal
• /
• v.21 no.4
• /
• pp.9-22
• /
• 1999

This paper considers a problem of configuring both physical backbone and logical virtual path (VP) networks in a reconfigurable asynchronous transfer mode (ATM) network where links are subject to failures. The objective is to determine jointly the VP assignment, the capacity assignment of physical links and the bandwidth allocation of VPs, and the routing assignment of traffic demand at least cost. The network cost includes backbone link capacity expansion cost and penalty cost for not satisfying the maximum throughput of the traffic due to link failures or insufficient link capacities. The problem is formulated as a zero-one non-linear mixed integer programming problem, for which an effective solution procedure is developed by using a Lagrangean relaxation technique for finding a lower bound and a heuristic method exploited for improving the upper bound of any intermediate solution. The solution procedure is tested for its effectiveness with various numerical examples.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.1
• /
• pp.42-48
• /
• 2006

This paper proposes the new efficient system design strategies for the acoustic-based underwater multiple modem and media access control protocol. The system aims to establish the acoustic-based communication network of an underwater vehicles for deep sea mining, which ensures a certain level of maximum throughput regardless of the propagation delay of acoustic and allows fast data transmission through the acoustic-based multiple channel.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2619-2621
• /
• 2001

This study proposes a new efficient MAC(media access control) protocol to establish the ultrasonic communication network for under water vehicles, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allows fast data transmission through the multiple ultrasonic communication channel. In this study, a media access control protocol for underwater communication network that allows 'peer-to-peer' communication between a surface ship and multiple underwater system is designed, and the proposed control protocol is implementde for its verification.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2008

In this paper, we propose and analyze the AMC (Adaptive Modulation and Coding) system with efficient turbo coded V-BLAST (Vertical-Bell-lab Layered Space-Time) technique. The proposed algorithm adopts extrinsic information from a MAP (Maximum A Posteriori) decoder with iterative decoding as a priori probability in two decoding procedures of V-BLAST scheme; the ordering and the slicing. Also, we consider the AMC system using the conventional turbo coded V-BLAST technique that simply combines the V-BLAST scheme with the turbo coding scheme. And we compare the proposed decoding algorithm to a conventional V-BLAST decoding algorithm and a ML (Maximum Likelihood) decoding algorithm. In addition, we apply a STD (Selection Transmit Diversity) scheme to the systems for better performance improvement. Results indicate that the proposed systems achieve better throughput performance than the conventional systems over the entire SNR range. In terms of transmission rate performance, the suggested system is close in proximity to the conventional system using the ML decoding algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.9-16
• /
• 2013

Long term evolution (LTE) and LTE-Advanced (LTE-A) systems adopt closed-loop multiple-input multiple-output antenna techniques. Equal gain transmission which has equal gain property is the key factor in their codebook design. In this paper, a novel differential codebook structure which maintains the codebook design requirements of LTE or LTE-A systems. Especially, eight-phase shift keying (8-PSK) constellations are used as elements of codewords, which not only maintain equal gain property but also reduce the computation complexity of precoding and decoding function blocks. The equal gain property is very important to uplink because the performance of uplink is very sensitive to the peak-to-average power ratio (PAPR). Moreover, the operation of the proposed differential codebook is explained as a rotation-lock structure. As the results of computer simulations, the steady-state throughput performance of the proposed codebook shows at least 0.9dB of SNR better than those of the conventional LTE codebook with the same amount of feedback information.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.1-9
• /
• 2011

In this paper, we propose an efficient method to create clusters of geographically distributed base stations which cooperatively transmit signals in cellular mobile communication systems. The proposed method utilizes a sequential selection approach to choose candidate base stations which can provide maximum weighted sum-rate gain when they participate in the cooperative transmission with the existing cluster. In particular, the proposed method limits the maximum number of base stations in a cluster by considering the system operational and implementation complexities. Moreover, the combinations of clusters dynamically change along with variations of channel environments. Through computer simulations, performance of the proposed method is verified by comparing with the non-cooperative transmission method and the static clustering method. Numerical result shows that the proposed sequential selection based clustering method is especially advantageous for the performance improvement of lower percentile users in terms of average throughput, and thus the proposed method can effectively improve the fairness among users.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.99-109
• /
• 2007

IEEE 802.lie is being proposed to improve QoS by IEEE 802.11 working group. HCCA (HCF Controlled Channel Access) a centralized polling based mechanism of IEEE 802.11e, needs a scheduling algorithm that decides on how the available radio resources are allocated to the polled STAs. In IEEE 802.l1e standard Reference Scheduler is presented. Reference Scheduler Polls all STAs in a polling list by the same interval that causes ineffectively frequent polling. It increases not only the overhead but it decreases the TXOP (Transmission Opportunity) utilization. In this paper, we propose the scheduling and admission control algorithm that poll stations depending on the MSI (Maximum Service Interval)o( stations to solve these shortcomings. In our proposed algorithm a station is polled by an interval close to its MSI, so polling overhead decrease and TXOP utilization increases than Reference Scheduler. Simulation results show that our algorithm outperforms Reference Scheduler. Our algorithm maintains higher aggregate throughput and services mere stations than Reference Scheduler.

• Journal of Biosystems Engineering
• /
• v.37 no.4
• /
• pp.225-232
• /
• 2012

Purpose: Accurate monitoring of information from various agricultural vehicles is one of the most important factors for appropriate management strategy of field operations. While there has been a number of study and design on applications of sensors and actuators for data acquisition and control system in tractor, incompatibility between various customized hardware and software has become a major obstacle to the universal deployment in real field operation. International standard for implementation of electronic control unit (ECU) in agricultural vehicles has becoming a mandatory requirement for inter-operation compatibility in the international trade of agricultural vehicle industries. The ISO 11783 standard is basically based upon well known communication technology designated using the controller area network (CAN) bus. While CAN bus could provide 1.0 Mbps of communication speed, the standard only recommended 250 kbps. Methods: This study presents the implementation and evaluation of ISO 11783 for tractor electronic control units (TECU)with a higher transmission rate from multiple ECU than 250 kbps. Throughput and loss rate of the developed prototype were calculated across manipulated bus load for laboratory experimental tests, and the maximum requirement of transmission rate by ISO 11873 was satisfied with lower than 60% of bus load. Results: Field tests with a TECU implemented to process messages from global positioning system (GPS) receiver resulted that the root mean square error of position information was lower than 4 m with 0.5 m/s as a travelling speed. Conclusions: Results of this study represent the utilization of the international standard ISO 11783 to providepractical developments in terms with the inter-operability of TECU.