Evaluation of the Implementation of ISO 11783 for 250 kbps Transmission Rate of Tractor Electronic Control Unit |
Lee, Dong-Hoon
(Biological Engineering, University of Missouri)
Lee, Kyou-Seung (Dept. of Bio-Mechatronic Engineering, Sungkyunkwan University) Moon, Jae-Min (Dept. of Bioindustrial Mechinery Engineering, Chonbuk National University) Park, Seung-Je (Dept. of Bioindustrial Mechinery Engineering, Chonbuk National University) Kim, Cheol-Soo (Dept. of Bioindustrial Mechinery Engineering, Chonbuk National University) Kim, Myeong-Ho (Dept. of Bioindustrial Mechinery Engineering, Chonbuk National University) Cho, Yong-Jin (Dept. of Bio-Mechatronic Engineering, Sungkyunkwan University) Kim, Seong-Min (Dept. of Bioindustrial Mechinery Engineering, Chonbuk National University) |
1 | ISO. 2009. ISO 11783-7: Tractors and machinery for agriculture and forestry-Serial control and communications data network-Part 7: Implement messages application layer. Geneva, Switzerland: ISO. |
2 | Ni, J. Q., A. J. Heber, M. J. Darr, T. T. Lim, C. A. Diehl and B. W. Bogan. 2009. Air quality monitoring and on-Site computer system for livestock and poultry environment studies. Transactions of the ASAE 52(3): 937-947.s DOI |
3 | NMEA. 2000. NMEA 2000: The network standard for interfacing marine electronics devices. Severna Park, MD: NMEA. |
4 | Oksanen, T., M. Linja and A. Visala. 2005. Low-cost positioning system for agricultural vehicles. In: IEEE International Symposium on Computational Intelligence in Robotics and Automation, pp.297-302, Monterey, CA: IEEE. |
5 | Pereira, R. R. D., E. P. Godoy, R. V. Sousa, A. J. V. Porto and R. Y. Inamasu. 2007. Proposal of a CAN-Based distributed control System for variable rate technology in agricultural machinery. Brazilian Society of Mechanical Sciences and Engineering 3:711-716. |
6 | Steinberger, G., M. Rothmund and H. Auernhammer. 2009. Mobile farm equipment as a data source in an agricultural service architecture. Computers and Electronics in Agriculture 65(2):238-246. DOI |
7 | ISO. 2004. ISO 11783-6: Tractors and machinery for agriculture and forestry-Serial control and communications data network-Part 6: Virtual terminal. Geneva, Switzerland: ISO. |
8 | Suvinen, A. and M. Saarilahti. 2006. Measuring the mobility parameters of forwarders using GPS and CAN bus techniques. Journal of Terramechanics 43(19):237-252. DOI |
9 | Wei, J., N. Zhang, N. Wang, D. Lenhert, M. Neilsen and M. Mizuno. 2005. Use of the "smart transducer" concept and IEEE 1451 standards in system integration for precision agriculture. Computers and Electronics in Agriculture 48(3):245-255. DOI |
10 | ISO. 2002. ISO 11783-9: Tractors and machinery for agriculture and forestry-Serial control and communications data network-Part 9: Tractor ECU. Geneva, Switzerland: ISO. |
11 | ISO. 2007. ISO 11783-10: Tractors and machinery for agriculture and forestry-Serial control and communications data network-Part 10: Task controller and management information system data interchange. Geneva, Switzerland: ISO. |
12 | Bosch. 2008. Controller Area Network (CAN) Specification Protocol, Version 2.0. Stuttgart, Germany: Bosch. |
13 | Auernhammer, H. and J. Frisch. 1993. Landwirtschaftliches BUS-System LBS, KTBLArbeitspapier 196. Darmstadt, Germany: KTBL. |
14 | Auernhammer, H. and H. Speckmann. 2006. Dedicated communication systems and standards for agricultural applications. In: ASAE CIGR Handbook of Agricultural Engineering, vol. 7, pp. 435-452, St. Joseph, MI: ASAE. |
15 | Benneweis, R. K. 2005. Status of the ISO 11783 serial control and communications data network standard. ASAE Paper No. 051167. St. Joseph, MI: ASAE. |
16 | Darr, M. J., T. S. Stombaugh and S. A. Shearer. 2005. Controller area network based distributed control for autonomous vehicles. Transactions of the ASAE 48(2):479-490. DOI |
17 | ISO. 2002. ISO 11783-2: Tractors and machinery for agriculture and forestry-Serial control and communications data network-Part 2: Physical layer. Geneva, Switzerland: ISO. |