• 공업화학
• /
• 제29권4호
• /
• pp.452-460
• /
• 2018

본 연구에서는 어성초(Houttuynia cordata)의 추출물 및 분획물을 제조하고 이들에 대한 생리활성과 성분분석을 하였다. 어성초는 50% 에탄올 추출물 및 에틸아세테이트 분획물을 제조하여 실험에 사용하였다. 항균활성 측정결과, S. aureus, B. subtilis에 대한 에틸아세테이트 분획의 MIC 값은 각각 78, $312{\mu}g/mL$으로 나타나 그람 양성균에 대하여 높은 활성을 보이는 것으로 나타났다. 1,1-Diphenyl-2-picrylhydrazyl (DPPH)에 대한 자유라디칼 소거활성($FSC_{50}$)은 50% 에탄올 추출물($27.15{\mu}g/mL$) 및 에틸아세테이트 분획($12.00{\mu}g/mL$)을 측정한 결과 에틸아세테이트 분획에서 활성이 더 크게 나타났다. Luminol-의존성 화학발광법을 이용한 $Fe^{3+}-EDTA/H_2O_2$계에서 생성된 활성산소종(reactive oxygen species, ROS)에 대한 총항산화능($OSC_{50}$)은 50% 에탄올 추출물($2.91{\mu}g/mL$), 에틸아세테이트 분획($0.983{\mu}g/mL$) 측정 결과 DPPH에 대한 소거활성과 같은 경향성을 보였다. 어성초 추출물의 HaCaT 세포보호효과를 확인하기 위해 UVB 조사 후 세포 내 ROS 소거활성을 확인한 결과, 어성초 에틸아세테이트 분획은 $1.6{\mu}g/mL$부터 농도 의존적으로 ROS 소거활성을 나타내었으며, 최고 농도인 $12.5{\mu}g/mL$에서 54.3%의 감소율을 보였다. 과산화수소로 유도된 세포보호효과 또한, 어성초 에틸아세테이트 분획은 $0.8{\mu}g/mL$부터 세포생존율을 유의적으로 증가시켜 최대 86.9%까지 증가시켰다. 실험에 사용된 어성초 추출물의 에틸아세테이트 분획을 가지고 TLC와 HPLC를 이용한 성분분석을 수행하였다. 그 결과 quercitrin, isoquercitrin, hyperoside, chlorogenic acid, neochlorogenic acid, cryptochlorogenic acid, rutin 및 afzelin이 있음을 확인하였다. 이상의 결과들로부터, 어성초 추출물 및 분획물은 ROS를 소거하고 항균효과를 나타냄으로써 외부 환경으로부터 세포막을 보호할 수 있는 천연 항산화제 및 천연 방부제로서 화장품 분야에서 응용가능성이 있음을 시사하였다.

• 콘크리트학회논문집
• /
• 제14권1호
• /
• pp.126-135
• /
• 2002

기존 철근콘크리트 구조물에 대한 보강 방법으로서 강판접착공법은 강판의 박리나 rip-off 등 조기 파괴의 문제점을 안고 있음에도 불구하고 가장 널리 이용되고 있다. 그러나, 아직까지도 이러한 조기 파괴 문제점은 강판 단부의 접착계면 주위의 국부적인 파괴메커니즘 관점에서 파악되지 않고 있다. 그러므로, 이 연구에서는 보강판의 파괴 메카니즘을 구명하고 접착계면에서의 박리기준을 제시하는 것을 목적으로 하고 있다. 이러한 목적으로 두 가지 방법에 의한 광범위한 실험이 수행되었는데, 그 하나가 순수 전단력이 작용하는 상태를 고려한 double lap pull-out test이고, 또 다른 하나는 휨과 전단이 동시에 작용하는 상태를 고려한 half beam test이다. 주요 실험변수로 강판의 두께, 접착제의 두께, 부착길이, 그리고 단부 처리방법 등을 채택하였으며, 이를 토대로 하여 각 변수에 의한 영향을 다각도에서 분석하였다. 강판의 길이방향으로의 변형률을 측정하여 그로부터 접착계면에서의 전단응력을 계산하였으며, 콘크리트와 강판의 상대 변위를 측정하여, 접착계면의 전단계수를 얻고자 하였다. 이러한 실험 결과를 이용하여 비선형 유한요소 해석결과와 비교를 통하여 실험의 검증 및 강판의 단부 접착계면에 발생하는 전단응력 및 법선응력을 도출하였다. 해석결과 최대 하중뿐만 아니라 균열패턴 등도 실험결과와 잘 부합되는 것으로 나타났다. 최종적으로, 해석으로부터 얻은 최대 전단응력과 법선응력의 관계를 이용하여 접착계면의 박리가 발생하는 기준치를 제시하였다. 이러한 연구 결과는 강판 보강된 콘크리트 휨부재에 대하여 보다 현 실적인 설계 및 해석을 가능케 할 것으로 사료된다.mitted) = 369.4$_{A}$V sub p/ - l237.8 ＜기중양생>lpha$), head separation factor($\beta$), tail separation factor((equation omitted))값이 증가하였다.C$였다.$였다.X>였다..X>였다.할 것으로 생각되었으며, 향후 더 많은 환자들을 대상으로 장기간에 걸친 임상적인 연구가 필요할 것으로 생각되었다.ang with P. japonica Powder had the least sweet taste. In the flavor and overall Preference, the Doenjang with P. japonica powder was the lowestEX>로 측정되었고, 계사내 지붕의 표면 온도는 최고 $29^{\circ}C$가 측정되었다. 계사 내 표면 온도 및 닭의 표면 온도는 계사내 공기온도의 영향을 많이 받는 것으로 나타났다.ill in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times higher than the predicted values obtained from Nusselt's film

• 터널과지하공간
• /
• 제31권4호
• /
• pp.289-308
• /
• 2021

본 연구에서는 열-수리-역학적 복합거동 수치해석을 활용하여 국내 고준위방사성폐기물 처분장의 완충재의 설계 기준 온도가 100℃ 및 125℃인 경우, 처분 간격에 따른 처분시스템의 최고 온도를 계산하고, 역학적 안정성을 확보하기 위한 암반의 조건을 도출하였다. 완충재의 설계 기준 온도를 현재와 같이 100℃로 유지할 때, 처분터널 간격이 40 m, 처분공 간격이 5.5 m인 경우와 처분터널 간격이 30 m, 처분공 간격이 6.5 m인 경우, 처분용기와 완충재가 접하는 점에서 최고 온도가 각각 99.4℃ 및 99.8℃로 계산되었다. 완충재의 설계 기준 온도를 125℃로 향상시킨 경우, 처분터널 간격을 30 m, 처분공 간격을 4.5 m까지 감소시켜 처분 면적을 KRS⁺ 기반 처분시스템 대비 55%까지 감소시킬 수 있었다. 다양한 처분 간격에 대해 암반에서의 역학적 안정성을 평가한 결과, 암반파괴가 발생하지 않기 위해서는 KRS⁺ 기반 처분시스템은 암반의 RMR 분류법의 Good rock에 해당하는 RMR 72.4 이상의 조건이어야 했다. 처분 간격이 감소할수록 암반의 RMR이 더 높아야 했으며, 처분터널 간격 30 m, 처분공 간격 4.5 m인 경우에는 RMR 87.3 이상이 되어야 암반의 파괴를 방지할 수 있었다. 그러나, 처분 이후 지하수 유입 시 벤토나이트 완충재 및 뒤채움재의 팽윤에 따른 구속압에 의한 암반 강도의 증가를 고려하면, 해석을 수행한 모든 처분 간격에 대해 암반의 RMR이 75 이상이면 역학적 안정성을 확보할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국강구조학회 논문집
• /
• 제27권6호
• /
• pp.513-523
• /
• 2015

H형강 철골 모멘트 골조에서는 기둥의 강축 방향 용접 모멘트접합부를 활용하는 것이 구조적으로 가장 이상적이다. 하지만, 모멘트 골조가 직교하는 경우, 기둥의 약축 방향으로도 용접 모멘트접합부를 사용해야 한다. 국내에서는 특히 강축 및 약축 방향 모두를 용접 모멘트접합부를 자주 사용하는 관행이 있다. 대표적인 연성내진상세인 RBS(reduced beam section, 보단면감소)접합부의 경우 국내외적으로 강축접합 위주로 실험연구가 진행되어 약축 RBS 용접모멘트접합부에 대한 실험자료가 매우 희소하다. 본 연구에서는 RBS를 도입한 약축 용접 모멘트접합부의 내진성능을 실험적으로 고찰하였다. Gilton-Uang (2002)의 선행연구를 참고하여 보 플랜지는 연속판과 맞댐용접하고 웨브는 전단이음판과 C-형 필릿용접부로 설계하여 실험을 수행하였다. 보에 사용된 강재가 내진용 강재가 아닌 일반 SS400 강재임에도 불구하고 3% 이상의 소성회전각을 발휘하였다. 제한된 결과이긴 하지만, 전단이음판과 보 웨브 사이의 C-형 필릿용접부 설계에서 보 웨브에 작용하는 휨모멘트와 전단력의 편심의 영향을 구체적으로 고찰할 필요가 있는 것으로 판단된다. 본 실험결과를 토대로 전단이음판 부근의 보 웨브 파단을 방지할 수 있는 C-형 필릿용접 형상 및 설계방안을 제안하였다. 보 플랜지와 연속판의 완전용입 용접부는 맞댄이음(butt joint) 형식이 되어 국부좌굴에 취약하고 이로 인해 피로파괴가 발생하는 경향이 있으므로 용접작업에 지장이 없는 범위에서 용접접근공(스켈럽)의 크기를 최소화할 필요가 있다. RBS형상, 스틱아웃, 트림, 연속판 두께 증가 등과 같이 이미 검증된 약축 모멘트 용접접합부의 내진상세들은 따르는 것이 바람직하다.

• 한국토양비료학회지
• /
• 제6권4호
• /
• pp.231-237
• /
• 1973

Phytotron을 사용(使用) 열대형질(熱帶形質)인 IR667 계통(系統)(수원 213 및214)과 기존장려품종(진흥(振興) 및 팔달(八達))의 생육(生育) 시기별(時期別)(묘대말기(苗代末期), 최분기(最分期), 출수기(出穗期))로 저온처리(低溫處理)($15^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$, 3일(日) 및 7일간(日間))를 하여 엽록소(葉綠素), 질소(窒素) 및 가리(加里) 함량(含量)의 변화(變化)를 상부제(上部第) 2엽신(葉身)에서 조사(調査)하였다. 1. chl. 함량이 $25^{\circ}C$ 에서는 IR667계통(系統)이 장여품종(奬勵品種)보다 크나 $20^{\circ}C$이하(以下)에서는 그 반대(反對)였으며 chi. a/b 값은 장려품종(奬勵品種)이 언제나 큰 경향이다. 2. 엽록소함량(葉綠素含量)은 생육(生育)에 따라 감소(減少)하며 chl.a가 b 보다 저온(低溫)에 의(依)한 감소(減少)가 크고 묘대기(苗代期)가 저온(低溫)의 영향(影響)을 가장 심히 받았다. 3. chl. 함량(含量)이 증가(增加)할수록 chl. a/b 값도 증가(增加)하는데 장해(障害)를 받으면 chi.당(當) a/b. 비율(比率) 증가(增加)가 감소(減少)하며 저온(低溫)에 약(弱)한 IR667이 장려품종보다 더욱 감소(減少)한다. 4. Chl. 잔존율(殘存率)로 보아 IR667계통(系統)이 장려품종(奬勵品種)보다 저온장해(低溫障害)를 크게 받는다. 5. 전질소(全窒素) 및 methanol 가용질소(可溶窒素)(S-N)는 저온(低溫)에 의(依)하여 감소(減少)하는 경향(傾向)이다. 6. chl. (a+b)/S-N 값은 생육(生育)에 따라 감소하며 온도(溫度)에 크게 영향(影響)받지 않으며 장려품종(奬勵品種)이 언제나 큰 경향(傾向)이다. 7. 저온(低溫)에 의하여 K함량(含量)은 감소(減少)하는 경향(傾向)이며 methanol 가용(可溶)K가 증가(增加)하면 chlorophyll 함량(含量)도 증가(增加)하는 경향(傾向)이다. 8. IR667이 고온(高溫)에서 생체당(生體當) chlorophyll 함량(含量)이 많은 것은 이의 다수성(多收性)의 한 원인(原因)이며 chl. /S-N가 적은것은 엽신(葉身)의 저온(低溫)이나 비절(肥切)에 의(依)한 적변(赤變)의 한 원인(原因)이 될 것으로 보였다.

• 자원환경지질
• /
• 제53권5호
• /
• pp.597-608
• /
• 2020

규모 5 이상의 경주지진과 포항지진이 발생한 이후에도 한반도 남동부에서는 여전히 수백 건의 여진과 미소 지진이 발생하고 있다. 이러한 현상은 응력이 계속 작용하고 있다는 것을 의미하며, 또 다른 큰 지진이 발생할 수도 있음을 암시한다. 따라서 본 연구에서는 한반도 남동부 포항-울산지역의 심부 지질구조를 분석하기 위해 중력장 해석 방법을 사용하였다. 먼저 연구지역의 부족한 중력 데이터를 수집하기 위해, 중력 탐사를 시행하여 기존 자료보다 정밀한 부게 중력이상을 계산하였다. 중력이상 데이터를 바탕으로 역산 방법인 "곡률 분석 (Curvature analysis)"과 "오일러 곱풀기 방법(Euler deconvolution method)"을 이용하여, 한반도 남동부의 심부 단층의 위치 및 방향성과 최대 깊이를 분석하였다. 그 결과, 본 연구지역에는 최소 6개의 심부 단층(C1~C6)이 존재하는 것으로 해석된다. 심부 단층선 C1은 방향성과 위치가 연일구조선과 일치하는 것으로 보아, 연일구조선이 최대 약 4000m 깊이까지 이어져 있는 것으로 해석된다. 심부 단층선 C2는 여러 개의 분절된 단층들로 이루어져 있으며, 지표의 단층들과 잘 대비된다. 심부 단층선 C3, C4와 C5는 북서-남동 방향의 울산단층과 평행한 방향성을 가지는 것으로 분석되며, 초기 백악기에 남북 방향의 응력을 받아 형성되었으나 퇴적물에 덮여 지표에 드러나지 않는 것으로 판단된다. 심부 단층선 C6는 북동-남서 방향성을 가지며, 어일분지의 동쪽 경계단층이 심부로 이어져 있는 것으로 사료된다. 분석한 심부 단층선과 미소 지진 발생 현황을 대비한 결과, 심부 단층선 C1과 2018년~2019년 동안 한반도 남동부에서 발생한 미소 지진의 분포가 대략 일치하는 것을 확인하였다. 이는 심부에 존재하는 단층과 최근 발생하는 지진이 연관이 있다는 것을 시사한다.

• Journal of Animal Science and Technology
• /
• 제46권3호
• /
• pp.459-468
• /
• 2004

본 연구는 우리 나라에 건축되어져 있는 개방육성비육돈사와 무창육성비육돈사의 환경효율을 검증하고자 하였다. 본 실험은 실험돈사에서 겨울철과 여름철로 나누어 실시한 실험결과는 다음과 같다. 1) 무창육성비육돈사는 외부의 기온 변화가 심하더라도 돈사내부의 온도는 외부기온의 영향을 받지 않고 여름철 24.8${\sim}$29.1$^{\circ}C$, 겨울철 17.9${\sim}$23.1$^{\circ}C$를 유지하였으나 개방육성비육돈사는 여름철 24.7${\sim}$32.3$^{\circ}C$, 겨울철 14.5${\sim}$18.2$^{\circ}C$를 유지하여 온도효율이 낮았다. 2) 암모니아 농도를 측정한 바 개방육성비육돈사는 여름철 9.31${\sim}$16.9 mg/$\ell$, 겨울철 5.1${\sim}$19.7 mg/$\ell$로 측정되었으며, 무창육성비육돈사는 공기입기 및 배기의 효율적인 구성으로 여름철 7.9${\sim}$16.1 mg/$\ell$, 겨울철 3.7${\sim}$9.6 mg/$\ell$를 유지하여 개방육성비육돈사 보다는 낮게 나타났다. 3) 무창육성비육돈사는 돼지생육 공간(하부)의 공기유속이 겨울철 최소환기(5%) 수준으로 하였을 때 0.0${\sim}$0.87 m/s 였으며, 여름철 최대환기(95%) 수준에서는 0.1${\sim}$2.73 m/s로 분포되어 여름철 및 겨울철의 무창육성비육돈사내 공기유속이 개방육성비육돈사보다 양호하였다. 4) 여름철 비육돈출하시(평균 110 kg 전후)의 체중은 개방육성비육돈사는 100.2인데 비하여 무창육성비육돈사에서의 체중은 107.3kg으로 약 7kg 정도의 차이로 빠른 증체를 가져왔는데, 이것은 외기의 영향을 영향을 크게 받지 않고 일정한 환경을 유지해 주어 스트레스를 줄여 주었기 때문으로 판단된다.

• Childhood Kidney Diseases
• /
• 제4권1호
• /
• pp.69-76
• /
• 2000

목 적 : 일차성 야뇨증의 병인론은 유전적 요인 외에 수면 요인, 야간 Arginine Vasopressin(AVP)분비 장애, 기능적 방광 미숙 등 주로 배뇨 반사의 성숙 지연이 논의되고 있으나 위험 요인에 대한 연구는 적었다. 이에 저자들은 소변을 충분히 가릴 나이인 5세 이후까지 야뇨증을 지속시킬 수 있는 위험 요인들을 분석하고자 하였다. 대상 및 방법 ;서울 목동지역 초등학교 1학년의 정기 신체 검사에서 야뇨증 설문지 조사를 통해 일차성 야뇨증으로 확인된 아동 20명과 이후 1년간 이화여자대학교 목동병원 소아과 외래에서 동일한 설문지 조사를 받은 6-7세의 일차성 야뇨증 아동 35명을 포함한 55명을 야뇨증군으로 하였고, 설문지 조사에서 야뇨증이 없었던 아동 221명을 대조군으로 하였다. 이중 야뇨증군 55명과 대조군 22명에서는 24시간 배뇨 일지를 기록하게 하였으며, 두 군사이에 유전적 요인, 심리적 요인, 발달 요인, 수면 요인, 일일 및 야간 수분 섭취량과 요량, 주간 배뇨 장애 및 일회 최대 요량 등을 비교분석 하였다. 결 과 : 1)부모의 야뇨증 병력은 야뇨증군에서 $20.0\%$로 대조군의 $2.7\%$에 비해 유의하게 많았다(P<0.05). 남녀비는 야뇨증군과 대조군에서 유의한 차이가 없었다. 2)출생 순서, 어머니의 직장 여부, 아동과 부모의 성격, 걷기 시작한 나이 및 학교 성적 두 군간에 유의한 차이가 없었다. 3) 잠에서 깨어나기 힘든 경우는 야뇨증군에서 $70.9\%$로 대조군의 $54.3\%$에 비해 유의하게 많았으나(P<0.05), 수면 시간은 차이가 없었다. 4) 야간 수분 섭취량은 야뇨증군에서 $330{\pm}158.2\;mL$로 대조군의 $235{\pm}129.5\;mL$에 비해 유의하게 많았고(P<0.05), 야간 요량은 야뇨증군에서 $390{\pm}61.5mL$로 대조군의 $140{\pm}43.2mL$에 비해 유의하게 많았다(P<0.05). 일일 수분 섭취량과 일일 요량은 두 군간에 유의한 차이가 없었다. 5) 일회 최대 요량은 야뇨증군에서 $107{\pm}35.9mL$로 대조군의 $236{\pm}41.3mL$에 비해 유의하게 적었다((P<0.05). 주간 배뇨 이상은 야뇨증군에서 $80.0\%$로 대조군의 $57.9\%$에 비해 유의하게 많았으며 주간 배뇨 횟수도 야뇨증군에서 $7.0{\pm}3.4$회로 대조군의 $5.4{\pm}1.6$회에 비해 유의하게 많았다(P<0.05). 결 론 :야뇨증은 유전적 요인을 비롯하여 성숙 지연과 관련된 수면 요인, 야간 다뇨, 방광 미숙 등이 관련될 것으로 생각된다. 야간 다뇨의 원인으로 야간 수분 섭취 과다가 관련되므로 치료의 일차 단계로 야간 수분 섭취 제한의 중요성이 강조되어야 한다고 생각된다.