• The Korean Journal of Ecology
• /
• v.27 no.1
• /
• pp.27-33
• /
• 2004

Cryptomeria japonica plantation was monitored every year during 15 years from 1983 to 1997 for stem diameter and volume. The reciprocal equation, 1/Y = A + B/N, was applied to the relationship between cumulative volume Y and cumulative number N from the largest tree in the stand each year. The parameters A and B, which means respectively the reciprocal of an asymptotic value of total stand stem volume and the reciprocal of the maximum stem volume, are related by a power function. The power functional relationship between A and B derived a linear relationship of B-points ( $N_{B}$, $V_{B}$; $N_{B}$ = B/A, $Y_{B}$ = 1/2A) of each Y-N curve on log-log coordinates. The gradient of B-point line was so steep that the Y-N curve moved parallel upward year by year. The time trajectory of mean stem volume (W) and density ($\rho$) provided evidence in favor of the 3/2 power law of self-thinning, because the gradient of W - $\rho$ trajectory on log-log coordinates approximated to -3/2 at the final stage of stand development. On the basis of the results of Y-N curves and W - $\rho$ trajectory, the time trajectory of maximum stem volume $W_{max obs}$ and $\rho$ was derived theoretically. The gradient of $W_{max obs}$ - $\rho$ trajectory on log-log coordinates is calculated to be -0.6105 at the final stage. The gradient of $W_{max obs}$ - $\rho$ trajectory was steeper than that of W - $\rho$ trajectory at the early stage, while the former is gentler than the latter at the later stage.stage.e.age.e.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.634-644
• /
• 2000

Sterba's theory that stem number maintaining maximum basal area per ha is maximum stem number of a stand, had been applied to data from 103 temporary plots in even-aged Pinus densiflora stands in Kangwon province, Korea and a maximum stem number and mortality model was prepared. DBH growth model which estimates dbh with the independent variables of stem number per ha and dominant height shows the good statistical performance, and explains well differences in dbh growth that would be caused by stem number per ha and dominant height. Basal area model derived from dbh growth model also explains well differences in basal area according to stem number per ha and dominant height. The maximum stem number curve, which is derived from stem number per ha at maximum basal area for dominant height and dbh, represents well the upper range of stem number per ha observed. And maximum stand density index derived from the maximum stem number model for dbh could be used for the index of maximum potential density of a stand. The maximum stem number model and maximum stand density index in this study were not based on stand data with maximum density but based on the temporary data from stands with various density. This maximum stem number model can be applied to the estimation of mortality and maximum potential volume.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.362-368
• /
• 2007

This study was conducted to estimate merchantable volume and yield per diameter (DBH) class of Pinus koraiensis and Larix kaempferi. Stem volume of trees in each diameter class was calculated using the existing equations for taper and height curve. Saw logs and pulpwood volume were then estimated from the stem volume in each diameter class. The final step was to estimate merchantable volume and yield from saw logs, assuming saw logs were used for lumber (boards or dimension products) production only. The results showed that the stem volume of Larix kaempferi was 23~38% higher than that of Pinus koraiensis at the same diameter classes. Both species were able to produce saw logs from the diameter class of 18 cm. Saw logs and pulpwood yield for both species rapidly increased due to the size limitation on small end diameter. This yield reached a maximum of 90% and 88% at 26 cm and 38cm diameter class, respectively, for Pinus koraiensis and Larix kaempferi. Lumber yield estimated for board products ranged from 23% to 56%. In the case of dimension products, Lumber yield became significantly smaller as saw logs were used for larger dimension products. These results can be used for calculating merchantable volume and economic value of trees, as well as determining final lumber products.

• Journal of Biosystems Engineering
• /
• v.10 no.1
• /
• pp.13-23
• /
• 1985

Spraying method from the paddy-field levee is known to give insufficient penetration of the spray droplets to the rice stem of the densely grown plants, which is generally encountered at the last stage of rice growth. This study was intended to investigate the spraying system to solve this existing problem. As an approach, it was attempted to develop the boom-with-nozzle, between-the-row application system. Several types of nozzles and their different arrangements in the boom were tested in the field to measure the penetration-reaching distance and the uniformity of spray droplet distribution. The results of the study are summarized as follows: 1. Field experiments by the spraying method from the paddy-field levee showed to have practically no penetration of the spray droplets to the portion of the plant stem with the normal flow volume generally applied and thus need for improving present spraying method. 2. It was found that, considering both the uniformity of the spray droplet distribution and performance rate, the most efficient type of nozzle in the between-the-row boom-type spraying system was one that has core-insert hollow-cone with some clearance between the cone and tip. 3. When tested by applying the spraying method of between-the-row, the nozzle pressure did not affect the uniformity of spray droplet distribution. However, the nozzle pressure had a positive effect on the penetrating-reaching distance of the facing side of the rice stem and did not affect much on that of the opposite face of the stem. It was also found that the maximum pressure to affect the penetration-reaching distance was about $10kg/cm^2$. 4. The uniformity of the spray droplet distribution in the between-the-row system was greatly affected by the height and orientation of the nozzles in the boom. Based on experimental work for the different type of the boom-with-nozzle arrangements, it is recommended that the position of nozzle is set at about 0.45 m above the ground and two nozzles in the boom are oriented to be faced with each other with some angle such that the droplet stream from the nozzle would not directly face with each other.

• Journal of Korean Neurosurgical Society
• /
• v.47 no.2
• /
• pp.128-133
• /
• 2010

Objective : The secondary verification of Leksell Gamma Knife treatment planning system (LGP) (which is the primary verification system) is extremely important in order to minimize the risk of treatment errors. Although prior methods have been developed to verify maximum dose and treatment time, none have studied maximum dose coordinates and treatment volume. Methods : We simulated the skull shape as an ellipsoid with its center at the junction between the mammillary bodies and the brain stem. The radiation depths of the beamlets emitted from 201 collimators were calculated based on the relationship between this ellipsoid and a single beamlet expressed as a straight line. A computer program was coded to execute the algorithm. A database system was adopted to log the doses for $31{\times}31{\times}31$ or 29,791 matrix points allowing for future queries to be made of the matrix of interest. Results : When we compared the parameters in seven patients, all parameters showed good correlation. The number of matrix points with a dose higher than 30% of the maximal dose was within ${\pm}\;2%$ of LGP. The 50% dose volume, which is generally the target volume, differs maximally by 4.2%. The difference of the maximal dose ranges from 0.7% to 7%. Conclusion : Based on the results, the variable ellipsoid modeling technique or variable ellipsoid modeling technique (VEMT) can be a useful and independent tool to verify the important parameters of LGP and make up for LGP.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.484-490
• /
• 2013

This study was conducted to develop a simulation model for estimating the amount of such products as round wood, dimension lumber and the residual wood biomass produced by processing the individual trees of Larix kaempferi. In the model, the stem volume is assessed using the taper equations of the species to estimate the stem forms. Then, the model simulates the conversion processes of logs to round wood or lumber and assesses the maximum amount of the wood products by the lumber dimensions or round wood size. Also the model provides information on the amount of residuals for kerf and slabs produced on the conversion processes for sawn timber or round wood. According to the results of an application of the model to a L. kaempferi process, the trees greater than 12 cm of DBH can be converted to logs for lumber or round wood production. For the trees, of which DBH is available for log conversion, the maximum amount of final products by dimensions were analyzed. In this analysis, production of the bigger dimension lumber was assumed to be preferred to that of the smaller or round wood. This model can be used for assesment of forest economic value through estimation of merchantable volume for the trees, and assessment of mill residues which has the potential to provide significant amount of feedstock for bioenergy production as well.

• Radiation Oncology Journal
• /
• v.34 no.4
• /
• pp.313-321
• /
• 2016

Purpose: Total scalp irradiation (TSI) is a rare but challenging indication. We previously reported that non-coplanar intensity-modulated radiotherapy (IMRT) was superior to coplanar IMRT in organ-at-risk (OAR) protection and target dose distribution. This consecutive treatment planning study compared IMRT with volumetric-modulated arc therapy (VMAT). Materials and Methods: A retrospective treatment plan databank search was performed and 5 patient cases were randomly selected. Cranial imaging was restored from the initial planning computed tomography (CT) and target volumes and OAR were redelineated. For each patients, three treatment plans were calculated (coplanar/non-coplanar IMRT, VMAT; prescribed dose 50 Gy, single dose 2 Gy). Conformity, homogeneity and dose volume histograms were used for plan. Results: VMAT featured the lowest monitor units and the sharpest dose gradient (1.6 Gy/mm). Planning target volume (PTV) coverage and homogeneity was better in VMAT (coverage, 0.95; homogeneity index [HI], 0.118) compared to IMRT (coverage, 0.94; HI, 0.119) but coplanar IMRT produced the most conformal plans (conformity index [CI], 0.43). Minimum PTV dose range was 66.8%-88.4% in coplanar, 77.5%-88.2% in non-coplanar IMRT and 82.8%-90.3% in VMAT. Mean dose to the brain, brain stem, optic system (maximum dose) and lenses were 18.6, 13.2, 9.1, and 5.2 Gy for VMAT, 21.9, 13.4, 14.5, and 6.3 Gy for non-coplanar and 22.8, 16.5, 11.5, and 5.9 Gy for coplanar IMRT. Maximum optic chiasm dose was 7.7, 8.4, and 11.1 Gy (non-coplanar IMRT, VMAT, and coplanar IMRT). Conclusion: Target coverage, homogeneity and OAR protection, was slightly superior in VMAT plans which also produced the sharpest dose gradient towards healthy tissue.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2015

This study examined the relationship between the shape of the inside of the PRV and the cavitation of the water supply system of an apartment house. In this paper, nine types of PRV with different gaps and shapes were analyzed numerically using a 3D model embedded in the commercial code, ANSYS-CFX. The lowest pressure and the maximum velocity occurred at the narrow gap, which is located at the between the stem and the disk. When the gap size was increased, the vapor volume fraction was always greater than 0, but the vapor volume fraction of the type of expansion pipe approached 0. These results indicate that the cavitation of PRV can be reduced by a shape change to the type of expansion pipe.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.192-201
• /
• 2015

Information on plant diversity and community structure are required to chalk out necessary actions for conservation management. The present study assessed the composition and diversity of tree species in Kamalachari Natural Forest of Chittagong South Forest Division, Bangladesh, during April 2010 to November 2011. A total of 107 tree species belonging to 72 genera and 37 families were recorded, where Moraceae family was represented by maximum (11) species. Density, Basal area and volume of tree species were $418{\pm}20.09stem/ha$, $21.10{\pm}2.62m^2/ha$ and $417.4{\pm}79.8m^3/ha$ respectively. Diameter and height class distribution of tree species revealed an almost reverse J-shaped curve. Both the number of species and percentage of tree individuals were maximum in the lower DBH and height ranges. Anthropogenic disturbances like illegal tree cutting, over extraction, settlement inside forest area etc. were noticed during the study, which are supposed to cause gradual decrease of both tree species and individuals in the higher DBH and height classes. However, Artocarpus chama was found dominant showing maximum IVI followed by Schima wallichii, Aporosa wallichii, and Lithocarpus acuminata. The quantitative structure of the tree species of Kamalachari natural forest is comparable to other tree species rich tropical natural forests. The findings of the study may help in monitoring future plant population changes of the identified species and adopting species specific conservation programs in Kamalachari natural forest.

• Progress in Medical Physics
• /
• v.29 no.4
• /
• pp.157-163
• /
• 2018

Plans converted using dose-volume-histogram-based plan conversion (DPC) were evaluated by comparing them to the original plans. Changes in the dose volumetric (DV) parameters of five volumetric modulated arc therapy (VMAT) plans for head and neck (HN) cancer and five VMAT plans for prostate cancer were analyzed. For the HN plans, the homogeneity indices (HIs) of the three planning target volumes (PTV) increased by 0.03, 0.02, and 0.03, respectively, after DPC. The maximum doses to the PTVs increased by 1.20, 1.87, and 0.92 Gy, respectively, after DPC. The maximum doses to the optic chiasm, optic nerves, spinal cord, brain stem, lenses, and parotid glands increased after DPC by approximately 4.39, 3.62, 7.55, 7.96, 1.77, and 6.40 Gy, respectively. For the prostate plans after DPC, the HIs for the primary and boost PTVs increased by 0.05 and 0.03, respectively, and the maximum doses to each PTV increased by 1.84 and 0.19 Gy, respectively. After DPC, the mean doses to the rectum and femoral heads increased by approximately 6.19 and 2.79 Gy, respectively, and those to the bladder decreased by 0.20 Gy when summing the primary and boost plans. Because clinically unacceptable changes were sometimes observed after DPC, plans converted by DPC should be carefully reviewed before actual patient treatment.