• 제목/요약/키워드: Maximum principal stress

검색결과 197건 처리시간 0.029초

자동차 충돌 해석에 관한 기초 연구 (Basic Study on Impact Analysis of Automobile)

  • 조재웅;민병상;한문식
    • 한국기계가공학회지
    • /
    • 제8권1호
    • /
    • pp.64-70
    • /
    • 2009
  • This study is to analyze the impact of automotive body with computer simulation. The total deformation, equivalent strain and strain and principal stress are analyzed respectively in case of front, rear and side impacts. The maximum total deformation of side impact is more than 6 times as large as that of rear impact. The maximum equivalent strain or stress of side impact is more than 4 times as large as that of rear impact. These deformation, strain and stress of front impact are a little more than those of rear impact. The maximum principal stress of side impact is more than 4.5 times as large as that of rear impact. This stress of front impact is a little more than that of rear impact.

  • PDF

실측 파형과 수치 파형에 의한 진동주응력 비교 (Comparison of the Vibration Principal Stress by Experimental and Numerical Waveform)

  • 홍웅기;송정언;박영민
    • 환경영향평가
    • /
    • 제21권5호
    • /
    • pp.609-615
    • /
    • 2012
  • In recent years, the development of computer technique was possible to the simulation analysis of the structure caused by ground vibration. Generally, finite element method(FEM) has been used in these structural analysis. In this study, it was calculated to the vibration energy as measuring vibration waveform, and estimated about principal stress due to medium characteristics of the ground as processing dynamic analysis by the vibration energy. The results are as follows : Firstly, the principal stress distribution in all mediums was different due to a medium condition, and the principal stress at concrete medium was represented to difference due to physical characteristics. Secondly, the principal stress by time increasing was represented to maximum amplitude within 0.03 second. And also, the principal stress after maximum amplitude was very large at concrete medium, which was considered to be formed compression or tension range at a medium boundary. Thirdly, the variation of principal stress at concrete medium was represented in the order of RC medium, NC=H medium, NC=S medium. It was considered that the vibration energy propagated fast when a medium have a big elasticity and density.

충돌 접촉에 있어서의 차체와 승객의 손상 (Damage of Car Body and Passenger at Impact Contact)

  • 한문식;조재웅
    • 한국생산제조학회지
    • /
    • 제20권3호
    • /
    • pp.280-283
    • /
    • 2011
  • This study investigates the durability of car body and the safety of passenger inside car body in the case of the impact contact at passenger and car body. In case of front impact contact, maximum von Mises equivalent stress and principal stress become 3240.7MPa and 1634MPa respectively at the rear part of car body and the neck of dummy. And maximum total deformation occurred with 14.145mm at the hand of dummy. In case of side impact contact, maximum von Mises equivalent stress and principal stress become 7687.9MPa and 1690.7MPa respectively at the front part of car body and the lap of dummy. And maximum total deformation occurred with 16.414 mm at the foot of dummy. In case of rear impact contact, maximum von Mises equivalent stress and principal stress become 2366.6MPa and 1447MPa respectively at the front part of car body and the neck of dummy. And maximum total deformation occurred with 7.548mm at the rear part of car body. As the maximum von-Mises stress at side impact is shown with more than 700MPa as over two times at front or rear impact the danger of car body is increased. The great possibility of damage is shown at neck and hand of dummy with more than total displacement of 10mm.

탄산음료용 PET병의 바닥면 크랙방지를 위한 Petaloid 디자인 (A Study on the Bottom Design of Petaloid Carbonated PET Bottle to Prevent Bottom Crack)

  • 신희철;류민영;김용환
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2001년도 추계학술대회 논문집
    • /
    • pp.154-157
    • /
    • 2001
  • Through this study we investigated the causes of bottom crack. We then redesigned petaloid bottom to prevent bottom crack. We examined the material property variations according to the stretch ratio of PET and analyzed stretches of bottom in blowing processes. We also performed crack test to observe a crack phenomena. The effective stress and maximum principal stress were examined by computer simulation. We concluded that the bottom crack occurs because of not only insufficient strength of material due to the insufficient stretch of PET but also coarse design of petaloid shape. The highest maximum principal stress occurred at valley in petaloid bottom of bottle and this strongly affected the crack in bottom. We redesigned petaloid shape to minimize maximum principal stress, and this result in increasing the crack resistance.

  • PDF

Investigation of Bottom Cracks in the Carbonated Poly(ethylene terephthalate) Bottle

  • Pae, You-Lee;Nah, Chang-Woon;Lyu, Min-Young
    • Elastomers and Composites
    • /
    • 제38권4호
    • /
    • pp.354-362
    • /
    • 2003
  • The use of a petaloid design for the bottom of carbonated poly(ethylene terephthalate)(PET) bottles is widely spread. This study investigated the causes of bottom cracks. The tensile yield stress variations of PET according to the crystallinity and stretch ratio were examined, then the stretch ratio and strength in the bottom area of a blown bottle were analyzed. A crack test was also performed to observe the cracking phenomena. The distribution of the effective stress and maximum principal stress were both examined using computer simulation to seek the influence of the bottom design on crack. It was concluded that the bottom cracks occurred because of inadequate material strength due to the insufficient stretching of PET, plus the coarse design of a petaloid bottom. The stretch ratio at the bottom during bottle blowing should be higher than the strain hardening point of PET to produce enhanced mechanical strength. The cracks in the bottom of the PET bottles occurred through crazing below the yield stress. The maximum principal stress was higher in the valleys of the petaloid bottom than in the rest bottom area, and the maximum principal stress had a strong effect on the cracks.

충격 하중을 받은 무근콘크리트의 최대주응력 비교 연구 (Comparative Study on the Maximum Principal Stress of Non-Reinforced Concrete Caused by Impact Load)

  • 송정언;박훈;김승곤
    • 화약ㆍ발파
    • /
    • 제30권1호
    • /
    • pp.1-8
    • /
    • 2012
  • 본 연구에서는 충격 하중을 받은 콘크리트 재료의 내부 주응력 변화를 확인하기 위하여 Visual FEA 유한요소 프로그램으로 콘크리트 재료의 단면을 모델링하여 절점에서의 최대주응력을 분석하였다. 결과적으로, 콘크리트 재료의 탄성계수가 작을수록 최대주응력은 증가하는 것으로 나타났고, 콘크리트 재료의 물성 변화에 따라 최대주응력 편차는 2~3배 차이를 나타냈다.

잔류응력을 고려한 점용접이음재의 피로설계 (Fatigue Design of Spot Welded Lap Joint Considered Residual Stress)

  • 손일선;배동호;홍정균;이범노
    • 대한기계학회논문집A
    • /
    • 제24권3호
    • /
    • pp.743-751
    • /
    • 2000
  • Because welding residual stress is formidable result in electric resistance spot welding process, and it detrimentally affect to fatigue crack initiation and growth at nugget edge of spot welded la p joints, it should be considered in fatigue analysis. Thus, accurate prediction of residual stress is very important. In this study, nonlinear finite element analysis on welding residual stress generated in process of the spot welding was conducted, and their results were compared with experimental data measured by X-ray diffraction method. By using their results, the maximum principal stress considered welding residual stress at nugget edge of the spot welded lap joint subjected to tension-shear load was calculated by superposition method. And, the $\Delta$P- $N_f$ relations obtained through fatigue, tests on the IB-type spot welded lap joints was systematically rearranged with the maximum principal stress considered welding residual stress. From the results, it was found th2at fatigue strength of the IB-type spot welded lap joints could be systematically and more reasonably rearranged by the maximum principal stress($\sigma$1max-res considered welding residual stress at nugget edge of the spot welding point.

역토내(壢土內)의 응력분포(應力分布)에 관(關)한 연구(硏究) (A Study on the Soil Stress Distribution in Furrow Slice)

  • 이기명;이석건;김태한
    • Journal of Biosystems Engineering
    • /
    • 제7권2호
    • /
    • pp.1-7
    • /
    • 1983
  • 경운시(耕耘時) 토양조건(土壤條件) 및 절삭조건(切削條件)에 따른 역토내의 응력분포(應力分布)를 파악(把握)한 목적(目的)으로 토양응력계(土壤應力計)를 시작(詩作)하여 소형토양조(小型土壤槽)을 사용(使用)한 실험(實驗)에서 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 가. 절삭조건(切削條件) 및 토양조건(土壤條件)은 주응력(主應力)의 방향(方向)에 영향(影響)을 미치지 않는다. 나. 절삭조건(切削條件)에 따른 주응력(主應力)의 크기는 경심(耕深)이 클수록 최대(最大) 주응력(主應力)이 증대(增大)하는 경향(傾向)이 있으나 절삭각(切削角)의 변화(變化)에는 그 영향(影響)이 나타나지 않았다. 다. 토양조건(土壤條件)에 따른 주응력(主應力)의 크기는 토양수분(土壤水分) 함량(含量)이 많아질수록, 점토분(粘土分)이 많을수록 최대(最大) 주응력(主應力)이 증대(增大)하는 경향(傾向)이 있다. 라. 전단면상(剪斷面上)에서의 응력분포(應力分布)는 모래 성분(成分)이 많은 토양(土壤)일수록 상층(上層)의 응력(應力)이 0에 접근(接近)하고 점토성분(粘土成分)이 많은 토양(土壤)일수록 상층(上層)의 응력(應力)이 증가(增加)하여 상하층(上下層)의 응력(應力)이 같아진다.

  • PDF

부분 무치악 임플랜트 보철 수복시 자연치와의 비고정성 연결형태에 따른 3차원 유한요소법적 연구 (THE THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE PARTIALLY EDENTULOUS IMPLANT PROSTHESIS WITH VARYING TYPES OF NON-RIGID CONNECTION)

  • 이선아;정재헌
    • 대한치과보철학회지
    • /
    • 제34권1호
    • /
    • pp.101-124
    • /
    • 1996
  • In this study, we designed the finite element models of mandible with varying their connecting types between the prosthesis on implant fixture and 2nd premolar, which were free-standing case(Mf), precision attachment case(Mp), semiprecision attachment case(Ms) and telescopic case(Mt). The basic model of the designed finite element models, which contained a canine and the 1st & 2nd premolar, was implanted in the edentulous site of the 1st & 2nd molar by two implant fixtures. We applied the load in all models by two ways. A vertical load of 200N was applied at each central fossa of 2nd premolar and 1st implant. A tilting load of 20N with inclination of $45^{\circ}$ to lingual side was applied to buccal cusp tips of each 2nd premolar and 1st implant. And then we analyzed three-dimensional finite element models, making a comparative study of principal stress and displacement in four cases respectively. Three-dimensional finite element analysis was performed for the stress distribution and the displacement using commercial software(IDEAS program) for SUN-SPARC workstation. The results were as follows : 1 Under vertical load or tilting load, maximum displacement appeared at the 2nd premolar. Semiprecision case showed the largest maximum displacement, and maximum displacement reduced in the order of precision attachment, free-standing and telescopic case. 2. Under vertical load. the pattern of displacement of the 1st implant appeared mesio-inclined because of the 2nd implant splinted together. But displacement pattern of the 2nd premolar varied according to their connection type with prosthesis. The 2nd premolar showed a little mesio-inclined vertical displacement in case of free-standing and disto-inclined vertical displacement due to attachment in case of precision and semiprecision attachment. In telescopic case, the largest mesio-inclined vertical displacement has been shown, so, the 1st premolar leaned mesial side. 3. Under tilting load, The pattern of displacement was similar in all four cases which appeared displaced to lingual side. But, the maximum displacement of 2nd premolar appeared larger than that of the first implant. Therefore, there was large discrepancy in displacement between natural tooth and implant during tilting load. 4. Under vertical load, the maximum compressive stress appeared at the 1st implant's neck. Semiprecision attachment case showed the largest maximum compressive stress, and the maximum compressive stress reduced in the order of precision attachment, telescopic and free-standing case. 5 Under vertical load, the maximum tensile stress appeared at the 2nd implant's distal neck. Semiprecision attachment case showed the largest maximum tensile stress, and the maximum tensile stress reduced in the order of precision attachment, telescopic and free-standing case. 6. Under vertical load or tilting load, principal stress appeared little between natural tooth & implant in free-standing case, but large principal stress was distributed at upper crown and distal contact site of the 2nd premolar in telescopic case. Principal stress appeared large at keyway & around keyway of distal contact site of the 2nd premolar in precision and semiprecision attachment case, appearing more broad and homogeneous in precision attachment case than in semiprecision attachment case.

  • PDF

노면에 접촉된 자동차 타이어의 응력 해석 (Stress Analysis of Automotive Tire at Contact on Road Surface)

  • 조재웅;한문식
    • 한국기계가공학회지
    • /
    • 제8권2호
    • /
    • pp.40-45
    • /
    • 2009
  • This study is analyzed by stress contour of automotive tire at contact on road surface. Maximum equivalent stress as 61200Pa is shown on the lower mid part in case of tire contacted on road surface. As the air pressure of tire increases, maximum total deformation as 5mm is shown on the side part of tire. It can be shown that the side part of tire is unstabilized. There is no load effect on tire at its upper and lower directions. When the moment applied on the side of tire is increased 1.4 times as its value, the value of maximum principal stress is increased 1.4 times. The stress at the tire is in proportion to the moment applied on the its side. The tire tends to incline toward its side by this moment.

  • PDF