• E2M - 전기 전자와 첨단 소재
• /
• 제7권5호
• /
• pp.409-416
• /
• 1994

A double layered photoreceptor using phthalocyanine dye was made by dip-coating method. The under cutting layer(UCL) was coated with A1$\_$2/O$\_$3/ or polyamide, and the charge generation layer(CGL) was formed by .tau.-type metal-free phthalocyanine. The oxadiazole was used as a charge transport layer(CTL) and polycarbonate and poly(vinyl butyral) was employed as a host polymer. The .tau.-H$\_$2/Pc had an absorption peak around 780nm, which coincided with the emitting wavelengths of GaAlAs diode lasers. Maximum charge acceptance of CTL that gives thickness of 12.mu.m was -900V by corona charge of -6.0kV. In photo-induced discharge measurements, residual potential was less than -20V and sufficient for ordinary use, and sample films using of poly(vinyl butyral) was showed good charge retention. In printing test, drum that was employed polycarbonate as a host polymer showed the good print quality.

• 대한토목학회논문집
• /
• 제34권4호
• /
• pp.1171-1180
• /
• 2014

유역의 유효우량을 산정할 경우 NRCS-CN 방법을 이용하는 것이 보통이다. NRCN-CN 방법에서 유역의 유출특성을 나타내는 중요한 인자인 유출곡선지수(CN)은 미국 유역을 대상으로 개발되어졌기 때문에, 미국 이외의 국가에서 적용될 경우 지역의 강우-유출 특성을 반영하지 못하는 한계점을 가지고 있다. 이에 많은 연구에서 유역의 CN값을 보정하는 방법을 제시하고 있다. 본 연구에서는 우리나라에 적절한 유효우량 산정방법을 제시하기 위하여 유역의 CN값을 가중평균하는 방법과 유역의 경사도를 고려하여 CN값을 보정하는 방법을 적용하여 유효우량을 산정하고 이를 관측 유효우량과 비교 분석을 수행하였다. 본 연구 결과, 경사도를 고려하여 CN값을 보정할 경우 유효우량이 전반적으로 크게 산정되었으며, 유효우량의 지속시간 또한 길어지는 것으로 나타났다. 유효우량의 산정방법에 따른 통계학적 오차 분석을 수행한 결과, 경사도로 보정한 CN값을 적용한 가중평균 유효우량 산정방법이 관측 직접유출량과 높은 정확성을 가지는 것으로 나타났다. 또한, 관측 자료를 이용하여 추정한 초기손실량과 GIS 자료를 이용하여 추정한 최대잠재보유수량과의 관계를 분석한 결과, NRCS-CN 방법에서 적용되고 있는 선형가정은 실제 강우-유출 관계와 큰 차이를 가지고 있는 것으로 나타났다.

• 한국농공학회논문집
• /
• 제47권3호
• /
• pp.59-68
• /
• 2005

The rainfall-runoff potential of Jangseong reservoir watershed was studied based on SCS (Soil Conservation Service, which is now the NRCS, Natural Resources Conservation Service, USDA) runoff curve number (CN) technique. Precipitation and reservoir operation data had been collected. The rainfall-runoff pairs from the watershed for ten years was estimated using reservoir water balance analysis using reservoir operation records. The maximum retention, S, for each storm event from rainfall-runoff pair was estimated for selected storm events. The estimated S values were arranged in descending order, then its probability distribution was determined as log-normal distribution, and associated CNs were found about probability levels of Pr=0.1, 0.5, and 0.9, respectively. A subwatershed that has the similar portions of land use categories to the whole watershed of Jangseong reservoir was selected and hydrologic monitoring was conducted. CNs for subwatershed were determined using observed data. CNs determined from observed rainfall-runoff data and reservoir water balance analysis were compared to the suggested CNs by the method of SCS-NEH4. The $CN_{II}$ measured and estimated from water balance analysis in this study were 78.0 and 78.1, respectively. However, the $CN_{II}$, which was determined based on hydrologic soil group, land use, was 67.2 indicating that actual runoff potential of Jangseong reservoir watershed is higher than that evaluated by SCS-NEH4 method. The results showed that watershed runoff potential for large scale agricultural reservoirs needs to be examined for efficient management of water resources and flood prevention.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1042-1047
• /
• 2002

$Al_2O_3-SiO_2$계 세라믹 화이버를 주원료로 하는 세라믹섬유지를 제조하기 위하여 스러리 점도변화에 따른 세라믹화이버의 침강특성과 pH 변화에 따른 제타전위의 변화와 세라믹화이버 분산특성과의 관계를 분석하였다. 슬러리에서 세라믹화이버의 해섬 및 분산을 위한 슬러리 적정 점도는 28~31 cps이었고, pH 변화에 따라 제타전위는 민감하게 변화하여 pH 7.5~9.5에서 -35~-36 mV로 최대치를 나타내었으며, 이때 세라믹화이버의 침강량도 가장 적게 나타나 슬러리의 제타전위가 증가함에 따라 세라믹화이버의 분산도 잘 이루어짐을 알 수 있었다. 습식초지공정 중 흡입탈수는 함수율 83 wt% 이상으로 유지시켜야 바인더 손실을 막을 수 있었으며, 압축탈수 후 함수율이 62wt% 미만이 되어야 습식회수가 가능하였다. 제조된 세라믹섬유지는 인장강도 $102 kgf/cm^2$, 평량 $98 g/m^2$를 나타내었다.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.423-429
• /
• 2008

Ceramic Fiber separator is the promising material for thermal battery system because it reduces the production cost and offers the potential to a new application compared to a pellet type electrolyte. The molten salt electrolytes for thermal battery were prepared by the impregnation of the commercial glass filters such as GF-A, C and F (Whatman, USA) with two types of molten-lithium salts, LiCl-KCl and LiK-LiBr-LiF. The wetting properties were evaluated by wetting balance test and wetting angle measurement. The wetting behaviors were strongly affected by the composition of the molten salts and the pore structure of the glass separators. The optimum wetting conditions for maximum loading and effective retention of the molten electrolyte were also studied.

• 한국농공학회지
• /
• 제28권2호
• /
• pp.31-41
• /
• 1986

Knowledge of the degree of yield reduction due to water stress at different crop growth stages in rice production is important for rational scheduling of irrigation during periods of insufficient water supply. Previous studies to determine the degree of yield reduction duo to water stress suffered from interruptions by rain during experiment. Also the findings did rot relate the degree of water stress to the soil water potential and water deficit status of rice plants. In this study, two years experiments were conducted using the high yielding rice varieties, an Indica x Japonica (Nampoong) and a Japonica variety(Choochung). These were grown in 1/200$^{\circ}$ plastic pots placed under a rainfall autosensing, sliding clear plastic roof facility to control rainfall interruptions. The results obtained were as follows. 1.The two varieties differed in the growth stage most sensitive to water stress as well as the degree of yield reductions. When rice plants were stressed to the leaf rolling score 4 and soil water potential of about - 20 bar at major crop growth stages which included heading, booting, non-effective tillering, panicle initiation and early tillering stages, the yield reductions in the Indica x Japonica variety were 58%, 34%, 27%, 22%, and 21%, respectively, whereas in the Japonica vairety they were 23%, 36%, 1%, 13% and 22%, respectively. This result show that the recommended drainage during non-effective tillering is valid only for the Japonica variety. Sufficient irrigation at booting, heading and early tillering stages are necessary for both varieties. 2.The two varieties showed visible wilting symptoms when the soil water potential dropped to about - 3.0 bar. The Japonica variety showed more leaf rolling than the Indica X Japonica. However, it had a higher retention of leaf water content and greater stomatal diffusive resistance. When the soil water potential dropped, the Japonica variety showed leaf rolling score (LRS) 1 at 0 soil-5. 0 bar and LRS 2 at 0 soil -6.0 bar while the Indica X Japonica showed LRS 1 at 0 soil - 5.5 bar and LRS 2at 0 Soil - 9.0 bar. The stomatal diffusive resistance was maximum at the second top leaf blade in both varieties at intermediate water stress of 0 soil - 4.5 bar. 3.The number of days that was required for the soil water potential to drop to-3. 0 bar and to - 20.0 bar after drainage of irrigation water from the 20cm deep silty clay loam soil in the pots were 6 and 13 days, respectively for booting stage, and 7 and 11 days, respectively for heading stage, 9 and 12 days, respectively for panicle initiation stage, and 12 and 19 days, respectively for early tillering stage. 4.Water stress during the early tillering stage recorded the longest delay in beading time, the largest reduction in panicle numbers and a substantial yield decrease of 20%. This calls for better water management to ensure the availability of water at this stage, particularly during drought periods. In addition, a reexamination of the conventional inter-drainage practice during the non-effective tillering stage is necessary for the high yielding Indica X Japonica varieties.

• Journal of the Korean Wood Science and Technology
• /
• 제37권6호
• /
• pp.537-545
• /
• 2009

본 연구는 일반 페인트 및 건조시멘트에 목탄을 첨가하여 제조된 건축자재의 제반 물리 화학적 특성 조사를 바탕으로 하여 목탄의 친환경 건축자재 혼합제로서의 활용 가능성을 모색하기 위한 목적으로 수행되었다. 목탄을 포함한 액상몰탈의 물리 화학적 물성 시험결과, 목탄 20% 이상을 포함한 액상몰탈의 경우, 점도에 대한 저항치인 주도와 불휘발분이 품질기준에 적합하였다. 목탄 첨가량이 증가할수록 건조시간은 지연되었으나, 모든 처리구에서 품질기준인 60분 이내에서 건조가 완료되었다. 기타 제반 물성에서는 모든 처리구에서 품질기준을 충족하였다. 이 결과로 볼 때, 액상 몰탈에 대한 적정 목탄 함량은 25%로 판단된다. 건조 시멘트 몰탈에 대한 압축강도는 목탄 5% 첨가구에서 가장 우수하였으며, 20% 이상 첨가구에서는 KS 기준치에 비해 낮은 것으로 조사되었다. 또한 목탄 첨가량 증가로 보수성은 지속적으로 증가하며, 암모니아가스 탈취율의 경우 일반 시멘트 몰탈이 59.5%, 목탄 10% 첨가 시멘트 몰탈은 71.6%의 암모니아를 흡착하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권3호
• /
• pp.270-274
• /
• 2005

A reactor-scale hydrogen (H2) production via the water-gas shift reaction of carbon monoxide (CO) and water was studied using the purple nonsulfur bacterium, Rhodopseudomonas palustris P4. The experiment was conducted in a two-step process: an aerobic/chemoheterotrophic cell growth step and a subsequent anaerobic $H_2$ production step. Important parameters investigated included the agitation speed. inlet CO concentration and gas retention time. P4 showed a stable $H_2$ production capability with a maximum activity of 41 mmol $H_2$ g $cell^{-1}h^{-1}$ during the continuous reactor operation of 400 h. The maximal volumetric H2 production rate was estimated to be 41 mmol $H_2 L^{-1}h^{-1}$, which was about nine-fold and fifteen-fold higher than the rates reported for the photosynthetic bacteria Rhodospirillum rubrum and Rubrivivax gelatinosus, respectively. This is mainly attributed to the ability of P4 to grow to a high cell density with a high specific $H_2$ production activity. This study indicates that P4 has an outstanding potential for a continuous H2 production via the water-gas shift reaction once a proper bioreactor system that provides a high rate of gas-liquid mass transfer is developed.

• Journal of Microbiology and Biotechnology
• /
• 제20권3호
• /
• pp.615-621
• /
• 2010

The viability of low-temperature sulfate reduction with hydrogen as electron donor was studied with a bench-scale gas-lift bioreactor (GLB) operated at $9^{\circ}C$. Prior to the GLB experiment, the temperature range of sulfate reduction of the inoculum was assayed. The results of the temperature gradient assay indicated that the inoculum was a psychrotolerant mesophilic enrichment culture that had an optimal temperature for sulfate reduction of $31^{\circ}C$, and minimum and maximum temperatures of $7^{\circ}C$ and $41^{\circ}C$, respectively. In the GLB experiment at $9^{\circ}C$, a sulfate reduction rate of 500-600 mg $l^{-1}d^{-1}$, corresponding to a specific activity of 173 mg ${SO_4}^{2-}g\;VSS^{-1}d^{-1}$, was obtained. The electron flow from the consumed $H_2$-gas to sulfate reduction varied between 27% and 52%, whereas the electron flow to acetate production decreased steadily from 15% to 5%. No methane was produced. Acetate was produced from $CO_2$ and $H_2$ by homoacetogenic bacteria. Acetate supported the growth of some heterotrophic sulfate-reducing bacteria. The sulfate reduction rate in the GLB was limited by the slow biomass growth rate at $9^{\circ}C$ and low biomass retention in the reactor. Nevertheless, this study demonstrated the potential sulfate reduction rate of psychrotolerant sulfate-reducing mesophiles at suboptimal temperature.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.78-88
• /
• 2015

Purpose: The objective of this study is to review researches regarding factors that potentially affect adolescent calcium (Ca) metabolism, and to suggest a potential modeling approach for optimizing gastrointestinal Ca absorption and peak bone mass. Background: Optimal gastrointestinal Ca absorption is a key to maximizing peak bone mass in adolescents. Urine Ca excretion in adolescents rises only after bone accretion is saturated, indicating that higher intestinal Ca absorption and bone retention is necessary to ensure maximum bone accretion. Hence, maximizing peak bone mass is possible by controlling the factors influencing gastrointestinal Ca absorption and bone accretion. However, a mechanism that explains the unique adolescent Ca metabolism has not yet been elucidated. Review: Dietary factors that enhance gastrointestinal Ca absorption may increase the available Ca pool usable for bone accretion, and a specific hormone may direct optimal Ca utilization to maximize peak bone mass. IGF-1 is an endocrine hormone whose levels peak during adolescence and increase fractional Ca absorption and bone Ca accretion. Prebiotics, generally obtained from dietary sources, have been reported to exert a beneficial effect on Ca absorption via microbiota activity. We selected and reviewed three candidates that could be used to propose a comprehensive Ca metabolic model for optimal Ca absorption and peak bone mass in adolescents. Modeling: Modeling has been used to investigate Ca metabolism and its regulators. Herein, we reviewed previous Ca modeling studies. Based on this review, we proposed a method for developing a comprehensive model that includes regulatory effectors of IGF-1 and prebiotics.