• 한국물환경학회지
• /
• 제25권1호
• /
• pp.159-166
• /
• 2009

This study has been attempted to generate electricity, while simultaneously treating artificial organic wastewater using both batch and continuous microbial fuel cells (MFCs). In the batch MFC, current-voltage curve showed an onset potential of -0.69 V vs. Ag/AgCl. The potential range between this potential and 0 potential displayed an available voltage for an automatic production of electric energy and glucose, which was oxidized and treated at the same time. The 486 mg/L glucose solution showed the maximum power of $30mW/m^2$ and the maximum current density of $75mA/m^2$ shown in the power curve. As a result, discharging of the cell containing COD 423 mg/L at the constant current density of $60mA/m^2$ showed a continuous electricity generation for about 22 hours that dropped rapidly due to dissipating of organic material. Total electric energy production was 18.0 Wh. While discharging, the pH change was low and dropped from pH 6.53 to 6.20 then increased to 6.47, then stabilized at this charge. The COD treatment efficiency was found to be 72%. In the continuous MFC, COD removal tends to increase as the hydraulic retention time is increased. At one day of hydraulic retention time as the maximum value reaches the COD removal efficiency, power production rate and power production rate per COD removal that were obtained were 68.8%, $14mW/m^2$, and $20.8mW/m^2/g$ CODrm, respectively. In the continuous MFC, the power production rate per COD removal increases as the hydraulic retention time is increased and decreases as the organic loading rate is increased. At the values lower than an organic loading rate of $1kgCOD/m^3/d$, the values higher than about $18.1mW/m^2/g$ CODrm could be obtained.

• Journal of Korean Society for Atmospheric Environment
• /
• 제24권E1호
• /
• pp.12-23
• /
• 2008

Relationship between the optimum soil water content and clay content on soil samples from mid-latitude European forest was tested. Soil samples from 4 different experimental sites (two forest sites in the Netherlands and a Danish forest) were collected, and analyzed for the soil physical and chemical characteristics. Water retention curves for the soil samples were determined according to the standard procedure ISO 11274, and pF decreased with increase in soil water contents. NO is simultaneously produced and consumed by microbiological processes, which comprise of nitrification and denitrification. NO consumption and production rates were determined from the soil samples and compared to their corresponding water retention curves in order to find the optimum soil water content and matric potential for maximum NO release from mid-latitude soils. NO consumption rate coefficient (k) in Hollandse Hout was significantly lower than those in other soil sites. Maximum NO production was observed at an intermediate soil moisture ($0.2{\sim}0.3kg/kg$) in all the soil samples. Resulting from the NO consumption and production rates for the soils, the empirical NO fluxes of the different soils were calculated in the laboratory.

• 대한원격탐사학회지
• /
• 제30권5호
• /
• pp.587-596
• /
• 2014

토양수분의 시공간적 변동성은 유역의 수문학적인 반응과 지표 대기간의 상호작용에서 중요한 관심사로 특히, 강우유출 예측 시 유역의 강우사상에서 사전 토양수분 상태 즉, 선행습윤조건(antecedent wetness conditions, AWC)이 고려되어야 한다. 본 연구에서는 선행습윤조건을 알아보기 위한 지표로 토양 습윤지수(SWI), 5일 선행강우지수($API_5$), 위성토양수분($SM_{rs}$), 5일 지점토양수분($SM_{g5}$)을 선정하여 한반도 4개 지점에 대한 선행수분조건을 파악하였다. 토양수분 자료는 AMSR-E로 관측된 자료를 활용하였으며, 이에 따라 각 지역별로 2011년의 강우사상을 선택하여 Soil Conservation Service-Curve Number (SCS-CN)법과 강우량을 활용하여 직접유출고와 최대잠재보유량을 산정하였다. 이를 토양의 습윤상태를 나타내는 4개 지표와의 관계를 살펴본 결과 최대잠재보유량과 SWI가 평균 -0.73의 높은 상관계수를 보였다. 또한 토양수분의 시간적 변동성을 나타내는 time length를 산정한 결과 지역 별로 상이하게 나타났으며 이는 연구지역 및 토양 특성을 반영한 것으로 판단된다. 추후 관측된 토양수분이 지표의 습윤상태를 예측하는데 정량적인 정보를 제공할 수 있으므로 이에 대한 지속적인 모니터링 및 분석이 필요할 것으로 사료된다.

• Journal of Multimedia Information System
• /
• 제5권4호
• /
• pp.235-244
• /
• 2018

Potential maximum soil moisture retention (S) is a dominant parameter in the Soil Conservation Service (SCS; now called the USDA Natural Resources Conservation Service (NRCS)) runoff Curve Number (CN) method commonly used in hydrologic modeling for event-based flood forecasting (SCS, 1985). Physically, S represents the depth [L] soil could store water through infiltration. The depth of soil moisture retention will vary depending on infiltration from previous rainfall events; an adjustment is usually made using a factor for Antecedent Moisture Conditions (AMCs). Application of the method for continuous simulation of multiple storms has typically involved updating the AMC and S. However, these studies have focused on a time step where S is allowed to vary at daily or longer time scales. While useful for hydrologic events that span multiple days, this temporal resolution is too coarse for short-term applications such as flash flood events. In this study, an approach for deriving a time-variable potential maximum soil moisture retention curve (S-curve) at hourly time-scales is presented. The methodology is applied to the Napa River basin, California. Rainfall events from 2011 to 2012 are used for estimating the event-based S. As a result, we derive an S-curve which is classified into three sections depending on the recovery rate of S for soil moisture conditions ranging from 1) dry, 2) transitional from dry to wet, and 3) wet. The first section is described as gradually increasing recovering S (0.97 mm/hr or 23.28 mm/day), the second section is described as steeply recovering S (2.11 mm/hr or 50.64 mm/day) and the third section is described as gradually decreasing recovery (0.34 mm/hr or 8.16 mm/day). Using the S-curve, we can estimate the hourly change of soil moisture content according to the time duration after rainfall cessation, which is then used to estimate direct runoff for a continuous simulation for flood forecasting.

• Advances in environmental research
• /
• 제7권2호
• /
• pp.73-85
• /
• 2018

The anaerobically digestion and agricultural application of organic wastes was conducted using food wastes and cow dung. Twenty kilograms each of the feed stocks was added into two 30 liters-capacity batch digesters. The anaerobic digestion was carried out within a temperature range of $25-31^{\circ}C$ for a retention time of 51 days. The results showed a cumulative gas yield of 5.0 bars for food waste and no gas production for cow dung within the retention time. Bacteria such as Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Proteus vulgaris and Clostridium sp were isolated. Fungi isolated included Aspergillus niger, Aspergillus nidulan, Trichophyton rubrum and Epidermophyton flocossum. The non-dispersive infrared (NDIR) analysis of the biogas produced confirmed that the gas consisted of $CH_4$, $CO_2$ and $H_2$. Statistical analysis revealed there was no significant correlation between temperature and biogas produced from the organic wastes (r= 0.177, p = 0.483).The organic wastes from the biogas production process stimulated maize growth when compared to control (soil without organic waste) and indicated maximum height. The study therefore reveals that food waste as potential substrates for biogas production has a moderate bio-fertilizer potential for improving plant growth and yield when added to soil.

• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.41-50
• /
• 2024

Presence of hazardous dyes in water cause considerable risks to the human health and environment due to their potential toxicity and ecological disruptions. Therefore, in the present research, to suggest an alternative method for the retention of toxic Azocarmine G (ACG) dye from aqueous media, natural and H₂SO₄-modified acacia sawdust were performed for the first time as low-cost and efficient adsorbents. Based on batch experiments, it was determined that the best conditions for the developed dye retention process were an initial pH of 2.0 and an equilibrium time of 240 min. Analysis of the data using both pseudo-first order and pseudo-second order kinetic models showed that the retention of ACG onto the adsorbents predominantly occurred through chemical adsorption. Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models were employed to provide insights into the interaction between the adsorbate and adsorbent and the mechanism of the adsorption process. Maximum monolayer adsorption capacities of natural and H₂SO₄-modified acacia sawdust were determined as 28.01 and 64.90 mg g^-1, respectively by Langmuir isotherm model. Results of the study clearly indicated that the modification of acacia sawdust with H₂SO₄ leads to a substantial increase in the adsorption performance of anionic dyes.

• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.85-94
• /
• 2010

The objective of this study is to estimate the flood runoff for three guaged stations within Namgang-Dam watershed which are operated by KWATER. For a flood runoff simulation, HEC-HMS was applied and the simulated runoff was compared with observed from 2004 to 2008. The watershed area of Sancheong, Shinan, and Changchon were 693.6 $km^2$, 413.4 $km^2$, and 346.48 $km^2$, respectively. The average runoff ratio of observed runoff for three watersheds were 0.725, 0.418, and 0.586, respectively. The dominant land cover of three watersheds are forest with the value of 71.6 %, 73.1 %, and 82.0 %. Three different cases according to the potential maximum retention of forest areas for calculating the curve number were applied to decrease the error between the simulated and observed. The simulated peak runoff of case 3 which applied the 90 % of potential maximum retention of curve number which is equivalent to AMCI for all the AMCI, AMCII, and AMCIII conditions showed least root mean square error (RMSE). The case 1, which was suggested by previous study, showed high discrepancy between the simulated and observed. Since the forest area consists of more than 70 % for all three watersheds, the application of curve number for forest is critical to improve the estimation errors. Further research is required to estimate the more accurate curve number for forest area.

• 농업과학연구
• /
• 제43권3호
• /
• pp.353-359
• /
• 2016

Soil organic carbon (SOC) retention has gradually gotten attention due to the need for mitigation of increased atmospheric carbon dioxide and the simultaneous increase in crop productivity. We estimated the statistical maximum value of soil organic carbon (SOC) fixed by clay content using the Korean detailed soil map database. Clay content is a major factor determining SOC of subsoil because it influences the vertical mobility and adsorption capacity of dissolved organic matter. We selected 1,912 soil data of B and C horizons from 13 soil series, Sangju, Jigog, Jungdong, Bonryang, Anryong, Banho, Baegsan, Daegog, Yeongog, Bugog, Weongog, Gopyeong, and Bancheon, mainly distributed in Korean upland. The ranges of SOC and clay content were $0-40g\;kg^{-1}$ and 0 - 60%, respectively. Soils having more than 25% clay content had much lower SOC in subsoil than topsoil, probably due to low vertical mobility of dissolved organic carbon. The statistical analysis of SOC storage potential of upland subsoil, performed using 90%, 95%, and 99% maximum values in cumulative SOC frequency distribution in a range of clay content, revealed that these results could be applicable to soils with 1% - 25% of clay content. The 90% SOC maximum values, closest to the inflection point, at 5%, 10%, 15%, and 25% of clay contents were $7g\;kg^{-1}$, $10g\;kg^{-1}$, $12g\;kg^{-1}$, and $13g\;kg^{-1}$, respectively. We expect that the statistical analysis of SOC maximum values for different clay contents could contribute to quantifying the soil carbon sink capacity of Korean upland soils.

• Nuclear Engineering and Technology
• /
• 제32권4호
• /
• pp.379-394
• /
• 2000

As an in-vessel retention (IVR) design concept in coping with a severe accident in the nuclear power plant during which time a considerable amount of core material may melt, external cooling of the reactor vessel has been suggested to protect the lower head from overheating due to relocated material from the core. The efficiency of the ex-vessel management may be estimated by the thermal margin defined as the ratio of the critical heat flux (CHF）to the actual heat flux from the reactor vessel. Principal factors affecting the thermal margin calculation are the amount of heat to be transferred downward from the molten pool, variation of heat flux with the angular position, and the amount of removable heat by external cooling In this paper a thorough literature survey is made and relevant models and correlations are critically reviewed and applied in terms of their capabilities and uncertainties in estimating the thermal margin to potential failure of the vessel on account of the CHF Results of the thermal margin calculation are statistically treated and the associated uncertainties are quantitatively evaluated to shed light on the issues requiring further attention and study in the near term. Our results indicated a higher thermal margin at the bottom than at the top of the vessel accounting for the natural convection within the hemispherical molten debris pool in the lower plenum. The information obtained from this study will serve as the backbone in identifying the maximum heat removal capability and limitations of the IVR technology called the Cerium Attack Syndrome Immunization Structures (COASISO) being developed for next generation reactors.

• 한국농공학회논문집
• /
• 제46권6호
• /
• pp.3-10
• /
• 2004

The fundamental study of hydrologic redesign of Donghwa area located in a sccond tributary of Seomjin river was performed. The amounts of hydrologic design were estimated using the available cumulated hydrology data provided by Korea Agricultural and Rural Infrastructure Corporation (KARICO). The management status of The water resources in Donghwa area was also widely surveyed. The probability rainfalls, probable maximum precipitation (PMP) and probability floods were estimated and subsequently their changes analyzed. The amount of 200 year frequency rainfall with l day duration was 351.1 mm, 2.5 % increased from the original design value, and The PMP was 780.2 mm. The concentration time was reestimated as 2.5 hours from existing 2.4 hours. Soil Conservation Service(SCS) method was used to estimate effective rainfall- The runoff curve number was changed from 90 to 78, therefore the maximum potential retention was 71.6 mm, 154 % increased from the original value. The Hood estimates using SCS unit hydrograph showed 8 % increase from original value 623 $m^3$/s to 674 $m^3$/s and The probable maximum Hood was 1,637 $m^3$/s. Although the Row rate at the dam site was increased, the Hood risk at the downstream river was decreased by the Hood control of the Donghwa dam.