• Nuclear Engineering and Technology
• /
• v.17 no.4
• /
• pp.267-278
• /
• 1985

Some kinds of methods have been applied to regulate the exposure doses by the radioactive effluents from nuclear power plants. The essential one is primary dose equivalent limit recommended by the ICRP. When the primary limit cannot be applied directly for regulation, there have been dose equivalent index in case of external exposure, or maximum permissible concentration, annual limit on intake, derived air concentration and maximum permissible body burden in case of internal exposure. But the derived limit is required from the viewpoint of discharge, for those values are inadequate to control discharge rate directly. This study was carried out to derive the release limit for the Wolsung nuclear power plant by the concentration factor method. This method is based on the assumption of steady state transfer between environment compartments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1086-1090
• /
• 2001

In this paper, a method deciding the permissible gains of the P and PT controllers for a retarded process under stable condition is proposed. For analysis, the controlled process is assumed to be first-order system with time delay. At first, the adjustable parameter sets causing stability limit are obtained based on the frequency domain condition which makes the roots of the characteristic equation locate on the imaginary axis. And the cut-in frequency ${\omega}_p$ to bring the parameter set to P control from PI control is derived is derived in terms of L and $T_m$ then ${\omega}_p$ is used to compute the maximum gain with stable condition. The results indicate that the permissible controller gains can be described by a unique if parameters L and $T_m$ are know.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.56-61
• /
• 2008

Because the harmonic disturbance characteristic which makes voltage drop and the deterioration of instantaneous power quality in electrical power system overheats the NGR and the customer capacitor and malfunctions the OCGR and AMR, it is necessary for electric power company to take active measures to reduce this disturbance. International Electrotechnical Commission(IEC) 61000-3-2 specifies limits for harmonic current emissions generated by low voltage(LV) electrical equipment whose input current $\leq$ 16(A) per phase. Analysis shows that limits for Class A equipment in IEC are calculated using the reference impedance of LV system and maximum permissible voltage and limits for other Classes are also calculated based on limits for Class A. Therefore we have calculated four(4) internal limits for LV electrical equipment using the korea reference impedance and maximum permissible voltage in this paper.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.753-758
• /
• 2007

To assess the safety of solar salts of Jeollanamdo province where most of Korean solar salts are produced, 433 samples of solar salts in total were collected and analyzed for their contents of sodium chloride and heavy metals (lead, cadmium, arsenic and mercury). Sodium chloride contents ranged from 80 to 85% in 63% of solar salts analyzed. Lead was not detected in 77% of solar salt samples and showed a value of below the maximum permissible limit (2 ppm) in other samples. Cadmium was not detected in most samples (78%), and the other samples where cadmium was detected showed a value far below the maximum permissible limit (0.5 ppm) except for three ones. Arsenic was detected in only four samples, but their concentrations were far below the permissible limit (0.1 ppm). Mercury was not detected in all samples. There were some differences between producing areas in the levels of sodium chloride and lead of solar salts, but the contents of cadmium, arsenic and mercury did not show significant regional differences. These results clearly indicate that solar salts produced from Jeollanamdo province are safe in the aspects of lead, cadmium, arsenic and mercury contents.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.40-47
• /
• 2007

This paper described recycling of the bottom ash, sourced from the local incinerators as a fine sand for concrete. 10% bottom ash was substituted for the ordinary beach sand in the mortar(on a weigh basis), in conjunction with the pozzolznic diatomite. The specimens were tested according to KS L 5105 and analysed by TCLP(Toxic Chemical Leaching Procedure). The results showed that the hazardous heavy metals in the bottom ash are within the maximum permissible limit of TCLP. The compressive strength of the mortar with 10% bottom ash was highly improved, compared to the control mortar when the pozzolanic diatomite was used. It revealed that the hazardous heavy metals of the mortar with 10% bottom ash were leached within the maximum permissible limit of TCLP. It was concluded that the bottom ash can be reused as a fine sand for concrete when the pozzolanic diatomite was used as a stabilizer.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.6
• /
• pp.435-444
• /
• 2020

Background: As the Positive List System (PLS) is implemented in broad application to agricultural products, attention to the correct use of pesticides is also needed in the production of mulberry leaves and fruit. In this regard, three types of pesticides against mulberry popcorn disease were applied 2 - 3 times both in the field and greenhouses to prepare safety standards. Residual pesticide analysis was conducted on mulberry fruits and leaves. Methods and results: Three pesticieds, thiophanate-methyl, thiophanate-methyl·triflumizole and fluopyram registered as PLS pesticides for mulberry popcorn disease, were sprayed in the Wanju and in Buan regions, after which residual pesticide analysis was conducted using high-performance liquid chromatography (HPLC). As three pesticieds were either undetected or below the permissible level in mulberry fruit, demonstrating that they were suitable for safe spraying. However, 5.6 mg/kg of thiophanate-methyl was detected in the greenhouse after three application, which was slightly above maximum residue limit (MRL). Furthermore the level of thiophanate-methyl·triflumizole was higher than 0.2 mg/kg ("Gwasang No. 2" variety, spraying twice) or similar to 0.09 mg/kg ("Daesim" variety, spraying thrice) the permissible level (0.1T mg/kg) as the thiophanate-methyl was detected in mulberry leaves in the greenhouse. Conclusions: The spraying frequency for controlling mulberry popcorn disease in greenhouses should be limited to two times or less, especially when mulberry leaves are treated with thiophanate-methyl·triflumizole careful consideration is required if the leaves are to be used as food materials.

• Structural Engineering and Mechanics
• /
• v.33 no.4
• /
• pp.529-537
• /
• 2009

A key parameter in the design of a laterally loaded pile is the determination of its performance level. Performance level of a pile is usually expressed as the maximum head deflection and bending moment. In general, uncertainties in the performance of a pile originates from many factors such as inherent variability of soil properties, inadequate soil exploration programs, errors taking place in the determination of soil parameters, limited calculation models as well as uncertainties in loads. This makes it difficult for practicing engineers to decide for the reliability of laterally loaded piles both in cohesive and cohesionless soils. In this paper, limit state functions and consequent performance functions are obtained for single concrete piles to predict the maximum bending moment, a widely accepted design criterion along with the permissible pile head displacement. Analyses were made utilizing three dimensional finite element method and soil-structure-interaction (SSI) effects were accounted for.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.121-127
• /
• 2006

Nursing often requires heavy physical work activities such as lifting heavy loads, working in awkward postures, transferring patients, operating hazardous equipment, etc. Among various nursing tasks, patients transferring is one of the most physically demanding tasks. This study aims to investigate workload of the patients transferring, and to propose its improving methods for reducing high workload. The results showed that irrespective of methods for patients transferring and the number of workers involved, workload for most patients transferring tasks exceeded the action limit represented in terms of L5/SI compressive force of 3,400N or LI of 1.0 by NIOSH. The loads for some tasks were far larger than the maximum permissible limit of 6,400N. It is recommended that the mechanical devices for transferring patients such as ceiling crane, sling lift etc. should be introduced rather than simply increasing the number of workers in the tasks.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.308-314
• /
• 2012

In order to monitor the residual pesticides in environment friendly agricultural commodities, fruits and fruiting vegetables. Twenty-five agricultural commodities were collected twice in May and August 2011 from nine environment friendly agricultural commodities-selling supermarkets and retail stores located in eight major cities in Korea. The number of each agricultural commodity collected, 555 samples in total, was 152 organic agricultural products, 202 pesticide-free agricultural products and 201 low-pesticide agricultural products. Pesticide residues in samples were analyzed by multiresidue method for 245 pesticides using a GC-ECD/NPD and an HPLC-DAD/FLD and the peaks suspected as pesticides were identified with a GC/MSD. As a result of pesticide residue analysis, three pesticides, bifenthrin, EPN and chlorpyrifos, were detected from four samples including apple, representing a detection rate of 0.72%. The residue levels of the four pesticide-detected samples were less than their maximum residue limits (MRLs) but one pesticide EPN detected from pear exceeded its legible criterion of one twentieth MRL. Estimated daily intakes of the pesticides detected from fruits and fruiting vegetables were less than 0.76% of their maximum permissible intake.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.266-273
• /
• 1999

The maximum work capacity at various shoulder angles was estimated in terms of joint moment through maximum voluntary contraction (MVC) measurement, and the result was compared to workload computed from 3-D static lifting model (3DSSPP) based upon national institute of safety and health (NIOSH) lifting guideline (1991). The electromyography (EMG) of anterior/posterior deltoid and trapezius muscle was also recorded to study the function of individual muscle during asymmetric shoulder lifting. Psychophysical workload was measured to observe the difference from MVC or biomechanical estimation. An apparatus was constructed for the study and twenty five trials including five flexion angles and five add/abduction angles were performed isometrically. Results indicated that MVC at 30 degree of flexion was the strongest whereas MVC at 120 degree was the weakest. In case of add/abduction, MVC decreased to 77 to 89 % during add/abduction compared to the MVC at neutral position. Regarding the normalized EMG value, a substantial increase was observed at 30 and 60 degree abduction. More importantly, the shoulder moment computed from maximum permissible limit (MPL) was greater than the moment at MVC condition during 30 degree adduction. Current result can be used as a reference information for a safe workplace design to prevent the shoulder from an excessive work load in industry.