• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.838-848
• /
• 2014

We present a simulation study of an algorithm for the range and angle of arrival(AOA) estimation with an interferometric synthetic aperture radar(InSAR) altimeter using a real digital elevation model(DEM). We also illustrate a step-by-step procedure of generating raw InSAR data, as well as their range and azimuth compressed data, which is to be used for the subsequent altitude and angle estimation. The AOA is estimated using a deterministic maximum likelihood estimator(DMLE) applied to the first arrived point for each pulse in the compressed data obtained with three antennas. The range bin size and the pulse repetition interval(PRI) are much smaller than the cell size of the DEM used in this study. To make the DEM compatible to the radar parameters, we first generate a higher resolution DEM by linearly interpolating the given DEM. After a brief description of the principle of the InSAR altimeter, the algorithms for altitude and angle estimation are presented, and their performance is assessed through simulation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.639-643
• /
• 2003

The data on 283 Sahiwal cows, sired by 16 bulls, maintained at Cattle Breeding Farm of Nagpur Veterinary College and Dairy Farm of Agricultural College, Nagpur, were considered for the estimation of genetic parameters. Variance and covariance estimates of first lactation traits were obtained using restricted maximum likelihood technique (REML). When first lactation milk yield (FLMY), first lactation length (FLL) and average daily yield (ADY) traits were considered for REML analysis, the heritabilities were $0.184{\pm}0.146$, $0.132{\pm}0.131$ and $0.141{\pm}0.133$, respectively. While, genetic and phenotypic correlations between them were medium to high except phenotypic correlations between FLL and ADY (-0.025). REML procedure considering FLMY, age at first calving (AFC) and first service period (FSP) combination exhibits heritabilities as $0.274{\pm}0.173$, $0.506{\pm}0.233$ and $0.274{\pm}0.172$, respectively. Genetic correlations were $-0.120{\pm}0.376$, $0.225{\pm}0.423$ and $0.365{\pm}0.331$ between FLMY and AFC, FLMY and FSP, AFC and FSP, respectively. Phenotypic correlations were 0.057, 0.289 and 0.123, respectively. Considering all five traits REML combination heritabilities estimated were $0.238{\pm}0.162$, $0.160{\pm}0.139$, $0.136{\pm}0.132$, $0.409{\pm}0.209$ and $0.259{\pm}0.168$ for FLMY, FLL, ADY, AFC and FSP, respectively. The genetic correlations were positive except FLMY and AFC. The phenotypic correlations were also positive except FLL and ADY, ADY and FSP. Almost all estimates were associated with high standard error.

• Korean Journal of Remote Sensing
• /
• v.28 no.6
• /
• pp.635-651
• /
• 2012

To produce a level-3 monthly composite image from daily level-2 Sea-viewing Wide Field-of-view Sensor (SeaWiFS) chlorophyll-a concentration data set in the East Sea, we applied four average methods such as the simple average method, the geometric mean method, the maximum likelihood average method, and the weighted averaging method. Prior to performing each averaging method, we classified all pixels into normal pixels and abnormal speckles with anomalously high chlorophyll-a concentrations to eliminate speckles from the following procedure for composite methods. As a result, all composite maps did not contain the erratic effect of speckles. The geometric mean method tended to underestimate chlorophyll-a concentration values all the time as compared with other methods. The weighted averaging method was quite similar to the simple average method, however, it had a tendency to be overestimated at high-value range of chlorophyll-a concentration. Maximum likelihood method was almost similar to the simple average method by demonstrating small variance and high correlation (r=0.9962) of the differences between the two. However, it still had the disadvantage that it was very sensitive in the presence of speckles within a bin. The geometric mean was most significantly deviated from the remaining methods regardless of the magnitude of chlorophyll-a concentration values. Its bias error tended to be large when the standard deviation within a bin increased with less uniformity. It was more biased when data uniformity became small. All the methods exhibited large errors as chlorophyll-a concentration values dominantly scatter in terms of time and space. This study emphasizes the importance of the speckle removal process and proper selection of average methods to reduce composite errors for diverse scientific applications of satellite-derived chlorophyll-a concentration data.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.2
• /
• pp.88-95
• /
• 2006

In this Paper. a method for improving the performance of automatic speech recognition (ASR) system for conversational speech is proposed. which mainly focuses on increasing the robustness against the rapidly speaking utterances. The proposed method doesn't require an additional speech recognition task to represent speaking rate quantitatively. Energy distribution for special bands is employed to detect the vowel regions, the number of vowels Per unit second is then computed as speaking rate. To improve the Performance for fast speech. in the pervious methods. a sequence of the feature vectors is expanded by a given scaling factor, which is computed by a ratio between the standard phoneme duration and the measured one. However, in the method proposed herein. utterances are classified by their speaking rates. and the scaling factor is determined individually for each class. In this procedure, a maximum likelihood criterion is employed. By the results from the ASR experiments devised for the 10-digits mobile phone number. it is confirmed that the overall error rate was reduced by $17.8\%$ when the proposed method is employed

• Animal Bioscience
• /
• v.37 no.3
• /
• pp.419-427
• /
• 2024

Objective: The objective of this study was to obtain (co) variance components and genetic parameter estimates for post-weaning body measurements such as body length (BL), height at withers (HW), and chest girth (HG) recorded at six (SBL, SHW, and SHG), nine (NBL, NHW, and NHG) and twelve (YBL, YHW, and YHG) months of age along with yearling weight (YW) in Nellore sheep maintained at livestock research station, Palamaner, Andhra Pradesh, India and also the association among body measurements with YW was studied. Methods: Data on 2,076 Nellore sheep (descended from 75 sires and 522 dams) recorded between 2007 and 2016 (10 years) were utilized in the study. Lambing year, sex of lamb, season of lambing and parity of dam were included in the model as fixed effects and ewe weight was kept as a covariate. Analyses were conducted with six animal models with different combinations of direct and maternal genetic effects using restricted maximum likelihood procedure. Best model for each trait was determined based on Akaike's information criterion. Results: Moderate estimates of direct heritability were obtained for the studied traits viz., BL (0.02 to 0.24), HW (0.31 to 0.49), and CG (0.08 to 0.35) and their corresponding maternal heritability estimates were in the range of 0.00 to 0.07 (BL), 0.13 to 0.17 (HW), and 0.07 to 0.13 (CG), respectively. Positive direct genetic and phenotypic correlations among the traits and they ranged from 0.07 (YBL-YW) to 0.99 (SBL-SHG, SHG-YW, and NBL-YBL) and 0.01 (SBL-YBL) to 0.99 (NBL-NHG), respectively. Further, the genetic correlations among all the body measurements and YW were positive and ranged from 0.07 (YW and YBL) to 0.99 (YW and SHG). Conclusion: There was a strong association of chest girth at six months with YW. Further, it is indicated that moderate improvement of post-weaning body measurements in Nellore sheep would be possible through selection.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.944-948
• /
• 2002

The aim of this study was to estimate heritability and repeatability for the number of embryos and transferable embryos collected per flush in Holstein population in Hokkaido, Japan. Data consisted of 306 MOET (Multiple Ovulation and Embryo Transfer) treatments on 224 Holstein cows from 1997 to 2000. Variance components for these traits were estimated using the REML procedure. The model included only non-genetic factors that were significant at the 0.05 level, through using generalized linear models, maximum likelihood methods, and stepwise regression procedure as fixed effects and sire and residual for heritabilities, donor and residual for repeatabilities as random effects. The factor identified as important in determining the results was the donor''s estrous condition after superovulation. Heritabilities for the number of embryos and transferable embryos collected per flush were 0.14 and 0.09, respectively. The corresponding repeatabilities were 0.43 and 0.32, respectively. These results show that it was difficult to genetically improve these traits, thus, environmental and physical factors affecting the donor must be improved. These results also show that it is necessary to take the donor''s estrous condition after superovulation and repeatabilities for the number of embryos and transferable embryos collected per flush into account when the genetic gains and inbreeding rates for MOET breeding schemes are predicted by a computer simulation.

• Advances in concrete construction
• /
• v.1 no.1
• /
• pp.85-102
• /
• 2013

Prior concrete strength distributions can be updated by using direct information from test results as well as by taking into account indirect information due to conformity control. Due to the filtering effect of conformity control, the distribution of the material property in the accepted inspected lots will have lower fraction defectives in comparison to the distribution of the entire production (before or without inspection). A methodology is presented to quantify this influence in a Bayesian framework based on prior knowledge with respect to the hyperparameters of concrete strength distributions. An algorithm is presented in order to update prior distributions through numerical integration, taking into account the operating characteristic of the applied conformity criteria, calculated based on Monte Carlo simulations. Different examples are given to derive suitable hyperparameters for incoming strength distributions of concrete offered for conformity assessment, using updated available prior information, maximum-likelihood estimators or a bootstrap procedure. Furthermore, the updating procedure based on direct as well as indirect information obtained by conformity assessment is illustrated and used to quantify the filtering effect of conformity criteria on concrete strength distributions in case of a specific set of conformity criteria.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.2
• /
• pp.475-486
• /
• 2006

Space time series data can be viewed either as a set of time series collected simultaneously at a number of spatial locations or as sets of spatial data collected at a number of time points. The major purpose of this article is to formulate a class of space time autoregressive moving average (STARMA) model, to discuss some of the their statistical properties such as model identification approaches, some procedure for estimation and the predictions. For illustration, we apply this STARMA model to the mumps data. The data set of mumps cases consists of the number of cases of mumps reported from twelve states monthly over the years 1969-1988.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.807-810
• /
• 2003

This research uses high-resolution satellite images as a source of collecting farmland information. For effectively extract the paddy area, we use texture information and different classify methods to assist the satellite image classification. First, using maximum likelihood classifier to extract paddy information from images. The results show that User Accuracy and Procedure Accuracy of the paddy area can increase from 80.60% to 95.45% and 84.38% to 95.45%. Second, establishing a paddy Knowledge Base and using Knowledge Base Classifier to extract paddy area, and result shows the User Accuracy and Producer Accuracy to be 92.16% and 90.06%. Finally, The result shows we can effectively contribute to the paddy field information extraction from high-resolution satellite images.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.2
• /
• pp.35-41
• /
• 1993

Statistical calibration is a useful technique for achieving compatibility between two different measurement methods, and it usually consists of two steps : (1) estimation of the relationship between the standard and nonstandard measurements, and (2) prediction of future standard measurements using the estimated relationship and observed nonstandard measurements. A predictive multivariate errors-in-variables model is presented for the multivariate calibration problem in which the standard as well as the nonstandard measurements are subject to error. For the estimation of the relationship between the two measurements, the maximum likelihood (ML) estimation method is considered. It is shown that the direct and the inverse predictors for the future unknown standard measurement are the same under ML estimation. Based upon large-sample approximations, the mean square error of the predictor is derived.