• Journal of the Ergonomics Society of Korea
• /
• v.27 no.3
• /
• pp.1-6
• /
• 2008

Individual finger/total grip forces, and subjective preferences for various individual finger grip spans (i.e., four fingers had identical grip spans or different grip spans) were evaluated by using an "Adjustable Multi-Finger Force Measurement (MFFM) System". In this study, three grip spans were defined as follows: a 'favorite grip span' which is the span with the highest subjective preference; a 'maximum grip span' which is the span with the highest total grip force; a 'maximum finger grip span' which is a set of four grip spans that had maximum finger grip forces associated with the index, middle, ring, and little fingers, respectively. Ten males were recruited from university population for this study. In experiment I, each participant tested the maximum grip force with five grip spans (45 to 65mm) to investigate grip forces and subjective preferences for three types of grip spans. Results showed that subjective preferences for grip spans were not coincidence with the performance of total grip forces. It was noted that the 'favorite grip span' represented the lowest total grip force, whereas the 'maximum finger grip span' showed the lowest subjective preferences. The individual finger forces and the average percentage contribution to the total finger force were also investigated in this study. The findings of this study might be valuable information for designing ergonomics hand-tools to reduce finger/hand stress as well as to improve tool users' preferences and performance.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.511-516
• /
• 2013

Objective: The objective of this study is designing an optimal hand tool through maximum grip force study accordance to the hand grip span. Background: In order to prevent musculoskeletal diseases, studies on hand tool design are proceeding based on grip strength, finger force, and contribution of individual finger force on total grip strength. However, experimental apparatus using a tool that is actually used in work place was almost non-existent. Method: 19 males were participated in an experiment. Using the load cell inserted real plier, finger force, grip strength, and subjective discomfort rate of both hands (dominant and non-dominant) were measured in 5 different hand grip span(45mm, 50mm, 60mm, 70mm, and 80mm). Results: There was significant difference(p<0.001) of total grip strength, individual finger force and subjective discomfort rating according to various hand grip span(45, 50, 60, 70, and 80mm). Also, statistically significant different(p<0.001) was shown between the dominant hand and non-dominant hand. In addition, individual finger force in maximum grip was in order of middle finger, ring finger, index finger, and little finger. Conclusion: Optimal grip span of pliers that exerting maximum grip strength is 50~60mm. Application: This finding is expected to be used for designing proper pliers.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.553-563
• /
• 2014

Objective: The purpose of this study was to evaluate the effect of gender (male, female) and grip spans (45, 50, 60, 70, 80mm) on total grip strength, resultant force, finger force and subjective discomfort rating. Background: In order to prevent musculoskeletal disorders, studies of hand tools need to be preceded based on grip strength, finger force, and subjective discomfort rating. However, experimental apparatus using tools such as pliers that reflect the actual work place was almost non-existent. Method: Fifty-Two (26 males and 26 females) participants were recruited from the student population. In this study, a pair of revised pliers, which can change grip span from 45 to 80mm was applied to estimate total grip strength, resultant force and individual finger forces. All participants were asked to exert a maximum grip force with three repetitions, and to report the subjective discomfort rating for five grip spans of pliers (45, 50, 60, 70, 80mm). Results: There were significant differences of total grip strength, resultant force, individual finger forces and subjective discomfort rating according to grip span. The lowest total grip strength was obtained from the grip span of 80mm for both genders. For resultant force, the highest resultant force was exerted at grip spans of 50, 60 and 70mm for females and 50 and 60mm for males. The lowest subjective discomfort rating was observed in the 50mm for both genders. Conclusion: Based on the result, 50mm and 60mm grip spans which provide the highest force and lowest discomfort rating might be recommendable for the male and female pliers users. Application: The findings of this study can provide guidelines on designing a hand tool to help to reduce hand-related musculoskeletal disorders and obtain better performance.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.3
• /
• pp.59-65
• /
• 2007

In this study, six grip spans (45mm-65mm) were tested to evaluate the effects of handle grip span and user's hand size on maximum grip strength, individual finger force, and subjective ratings of comfort using a digital dynamometer with individual force sensors. Forty-six males were assigned into three hand size groups according to their hand lengths. Results showed that overall 55mm and 50mm grip spans were the most comfortable sizes and associated with the highest grip strength in the maximum grip force exertions, whereas 65mm grip span was rated as the least comfortable size as well as the lowest grip strength. In the interaction effect of grip span and hand size, small and middle hand sized participants rated the best preference and the least preference grip spans differently with large hand sized participants. With respect to the analysis of individual finger force, the middle finger force was the strongest and the highest contribution to the total finger force, followed by ring, index and little fingers. In addition, it was noted that each finger had a different optimal grip span for exerting maximum force resulting in a bowed contoured shaped handle for two-handle hand tools. Thus, the grip spans for two-handle hand tools might be designed according to the users' hand and finger anthropometrics to maximize performance and subjective perception of comfort.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.4
• /
• pp.13-23
• /
• 2006

Grip strength provides a quick and objective index of the functional integrity of the upper extremities. It is widely used as an assessment measure in physical and rehabilitation medicine. In this study, maximum voluntary grip strength of 20 college students wearing 5 different gloves were measured using Jamar hand dynamometer. The results show that maximum voluntary grip strength was generally reduced when wearing gloves as compared to bare-handed. More specifically, the grip strength was highest when wearing PVC coated glove or bare-handed and getting lowered as wrist band, rubber, leather, and cotton glove in these order. Depending on the measuring posture of grip strength, shoulder height with arm extended forward was higher than the elbow was flexed 90 degree. Moreover, subjects' demographic factors and hand dimensions were not closely related to the grip strength. It is thus recommended that the proper glove should be provided to reduce the negative consequences including dropping a tool, poorer control of a tool. lower quality work, and increased muscle fatigue and in turn to increase the user safety and satisfaction.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.381-387
• /
• 2011

Objective: The aim of this study was to investigate the maximal grip strength for the combinations of resting time and trial and to provide guideline of resting time for the maximum gripping task associated with the number of trials. Background: Despite many previous researches for the maximal grip strength, few studies have considered the effect of both trials and rest time on the maximum grip strength. Methods: A total of thirty subjects participated in the study. The average of maximum grip strength was measured using JAMAR hydraulic hand dynamometer. The testing position was same as the position recommended by the American Society of Hand Therapists. The between-subject experimental design has been conducted in this study. Trials(1~20 trials) and rest time(2, 3, and 4min) were considered as independent variables, and the maximum grip strength was considered as dependent variable, respectively, in this study. Results: According to the result of the number of trials, the maximal grip strength decreased gradually as the number of trials increased. The ANOVA result showed that the main effect was significant for both resting time(p<.0001) and trial(p<.0001), and the interaction was significant(p<0.0086). Conclusions: The maximal grip strength decreased gradually as the number of trials increased. Thus, basic guideline of resting time was suggested for the number of trials of maximal grip strength tests in this study.

• Journal of Korean Physical Therapy Science
• /
• v.25 no.2
• /
• pp.47-54
• /
• 2018

Purpose: The purpose of this study was to investigate the most effective exercise position of Latissimus dorsi's activities during Pull up, Push up and Lat pull down among few positions of hand grips(pronation, Supination and neutral grip) and grip widths(30cm, 60cm) based on EMG activities. Method: 10 healthy adults were participated in this study and the surface EMG activities of the Latissimus dorsi were measured during Pull up, Push up and Lat pull down exercise according to specific hand grip and grip width positions. The maximum and mean value of Latissimus dorsi's EMG activities at all positions were recorded and analysed by ONE-WAY REAPTED ANOVA. Results: The showed that the most Latissimus dorsi's activities is during Pull up exercise. Main results are as follows 1)maximum value: For Pull up, among all studied positions, Rt Latissumus dorsi, position of Supinated grip and 60cm grip width showed strongest muscle activation based on maximum EMG value. Statistical significance was assumed at p<.05. 2)mean value: For Pull up, among all studied positions, Both Latissimus dorsi, position of pronated grip and 60cm grip width showed strongest muscle activation based on mean EMG value. Statistical significance was assumed at p<.05. Conclusion: Therefore, taking the results of this study, Pull up exercise would be the best exercise of Latissimus dorsi's activation. It is recommended to do in pronated grip position and 60cm grip width during Pull up to make body fit.

• Journal of Korean Academy of Medicine & Therapy Science
• /
• v.10 no.2
• /
• pp.73-80
• /
• 2018

Objective: We developed an ergonomic pruning shears that allows the user to freely adjust the width of the grip and conducted this study to examine the effects of the pruning shears on grip strength and the fatigue of the fingers. Method: The maximum grip strength was first measured with an digital dynamometer, and the maximum grip strength was measured again after the subjects repeated scissoring 100 times using general pruning shears or ergonomic pruning shears. Borg's CR-10 scale was used to measure subjective fatigue after using the two pruning shears. Results: When the grip strength values after using the two pruning shears were compared with each other the mean grip strength after using ergonomic pruning shears was 27.69 kg, which was higher than that after using general pruning shears, 25.73 kg (p<.05). The subjective fatigue when the two pruning shears were used was shown to be 3.6 points for general pruning shears and 1.73 points for ergonomic pruning shears (p<.05). Conclusion: After repeating scissoring 100 times, the fatigue of the fingers was lower when ergonomic pruning shears were used than when general pruning shears were used and grip strength was higher when ergonomic pruning shears were used than when general pruning shears were used.

• Physical Therapy Korea
• /
• v.16 no.4
• /
• pp.8-15
• /
• 2009

Grip strength is an objective indicator for evaluating the functional movement of upper extremities. Therapists have been using it for a long time as an excellent barometer for evaluating the therapy process, therapeutic effects and prognosis of patients with injuries in upper extremities. This study investigated the effects of extensor pattern position and elastic taping of non-dominant hand on the grip strength of dominant hand among general adults. The subjects of this study were 23 males and 7 females from physical therapy departments of 3 Universities located in Busan who agreed to participate in the experiment and the resultant data were analyzed using SPSS version 12.0. The results of the study were as follows. First, there was a significant difference between the grip strength of dominant hand when the non-dominant hand was at the neutral position and that when the non-dominant hand was at the extensor pattern position and both hands were at the maximum strength simultaneously (Bonferroni-corrected p<.001). Second, there was a significant difference between the grip strength of dominant hand when the non-dominant hand was at the neutral position and that when the elastic taping of non-dominant hand was applied (Bonferroni-corrected p<.001). Third, there was no significant difference between the grip strength of dominant hand when the non-dominant hand was at the extensor pattern position and both hands were at the maximum strength simultaneously and that when the elastic taping of non-dominant hand was applied. The irradiation effects through the extensor pattern position of non-dominant hand and application of the elastic taping to non-dominant hand showed significant results in improving the maximum grip strength of dominant hand. This finding could be suggested as the probability for the indirect treatment of the upper extremities of hemiplegia and orthopedic patients due to the long-term fixing of upper extremities.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.227-233
• /
• 2021

Objective: The purpose of this study was to in this study. The maximum grip force of the elderly hand was measured using a custom-designed grasping apparatus mounted with five three-component force transducers. The Jebsen-Tayler hand function test and Purdue Pegboard test were performed to evaluate the dexterity of the hand. Method: Twenty-six elderly women participated in the left hand between the maximum grip force and the Jebsen-Taylor hand function test results (r=-.513, p=.007). A significant correlation was also shown in the hand maximum grip force and the hand Purdue Pegboard results (r=.514, p=.007). However, no significant correlation was found in the right hand. Results: We found a significant correlation investigate the relationship between hand grip strength and hand dexterity in the elderly. Conclusion: Our findings in the current study support the theory of 'Strength-dexterity complementariness' which states that improvement in dexterity is associated with the grip force strength.