• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2000

This paper was to measure the structure, electric characteristics of 0.05Pb($(Al_{0.5}Nb_{0.5})$) - 0.95Pb$(Zr_{0.52}Ti_{0.48})O_3$ ceramics dopped with Cr+Fe. The results of this paper were gotten such as follows; The dielectric constants were decreased with Cr+Fe. The dielectric loss was minimum value of 1.008[%], dopped with Cr+Fe O.9[wt%] at 1200[$^{\circ}C$], In case of sintering at 1150[$^{\circ}C$], electromechanical factodkp) was maximum value of kp 42.73[%], at Cr+Fe 0.9[wt%]. The mechanical quality factor(Qm) was maximum value at Cr+Fe 1.2 [wt%], Also, in case of dopped with Cr+Fe, it make a improvement in temperature coefficient of resonant frequency at 0.3[wt%], 1150[$^{\circ}C$].

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.203-208
• /
• 2016

In this paper, vibration characteristics in terms of the airfoil cross-sectional shape was examined by using the EDISON co-rotational plane beam-transient analysis. Assuming aircraft wing as a cantilevered beam with a constant cross-sectional shape, natural frequencies of each airfoil shape was compared while varying airfoil maximum thickness and maximum camber length, using Fast Fourier Transformation(FFT). When the airfoil maximum thickness was varied, natural frequency showed peak value at 18% chord, and decreased afterwards. When the airfoil maximum camber length was varied, natural frequency either increased or decreased at 6% chord, while at 8% the natural frequency showed its maximum. Applying such trends to B-737 wing airfoil, an improved B-737_mod airfoil shape was obtained with regard to the vibration characteristics.

• 한국철도학회논문집
• /
• 제16권1호
• /
• pp.1-6
• /
• 2013

본 연구에서는 복합소재 전동차용 대차프레임에 적용되는 4매 주자직 유리섬유/에폭시 복합소재에 대한 고유진동 특성과 주파수에 따른 감쇠특성을 평가하였다. 이를 위해 오토클레이브 성형을 통해 길이와 두께가 다른 유리섬유/에폭시 빔 시편을 제작하였다. 시험결과 감쇠비의 최대값은 최소 고유진동수에서 발생하였다. 또한, 주파수가 증가함에 따라감쇠비는 지수 함수적으로 임계치까지 감소하였다. 이후에는 주파수에 따라 증가하는 경향을 보였다.

• 물과 미래
• /
• 제19권3호
• /
• pp.249-258
• /
• 1986

본 연구는 수공구조물의 계획설계와 물관리 계획시 계획강우량의 결정기준이 되는 우리나라 전역의 최대하강수량 추정을 위한 최대하강수량 빈도계수 산정에 관한 내용이다. PMP 빈도계수 산정에 있어서는 연속기록년 20년의 자기우량기록지 보유지점을 대상으로 하였으며, 지속기간별(10분, 1,2,4,6,12,24시간) 연최대치 강우자료집단을 이용하여 연최대평균강우량에 따른 PMP 빈도계수를 결정할 수 있는 상관도를 작성하였다. 최대하강수량은 최대평균강우량과 빈도계수 및 지속기간 상관도상에서 얻어진 PMP 빈도계수와 통계치를 사용하여 통계학적 방법으로 산정하였으며, 포락선에 의해서 지점 최대하강수량과 지속기간 관계식을 유도하여 산정하였다. 산정된 지점 최대하강수량으로부터 전국에 대한 24시간 최대하강수량 분포도와 PMP·DAD 곡선을 작성하였다. ^ The purpose of this study is to estimate the PMP frequency factor for evaluation of the Probable Maximum Precipitation (PMP) in Korea. The value of PMP is the criterion of the determination of design rainfall in Planning and designing hydraulic structures, and water resources management. To obtain the object, 12 key stations were selected in which have the automatic rain0recording paper of 20 years, and the annual maximum rainfall values were calculated for each 7 durations(10 min., 1,2,4,6,12,24 hr.). The statistics(mean, standard deviation)were estimated, and diagram which shows the relationship between mean annual maximum rainfall($$) and frequency factor for each durations were drawn. PMP was estimated by statistical method using the PMP frequency factor obtained from the diagram and statistics($$, Sn). The PMP-Duration Equation was derived from the envelope curve in order to obtain the PMP for an arbitrary duration. The isohyetal map of 24 hours PMP and PMP. DAD curve for the whole of Korea were drawn in accordance with the point PMP values.

• 아시안잔디학회지
• /
• 제3권1호
• /
• pp.34-38
• /
• 1989

This research was carried out to elucidate on standing crops , dry matter yields , the nutritive value and in vitro digestihility according to mowing frequency and period during the growing season in the 3cm moving plot in Korean Lawn , Zoysia japonica Sheud . The increasing tendency in the standing crops was showed yield from May to Septemher . In the dry matter yield , there was a tendency of rapid increase from May to August ( maximum level ). Afterwards there appeared a tendency of decrease slight ( Table 3). The nutritive value and in vitro digestihility ; The crude protein and crude fat in the 3cm moving plot showed a tendency of slight decrease as a moving period and frequency . On the other hand , Neutral detergeat fiber , Acid detergent fiber and cellulose showed a tendency of slight increase as mowing period and frequency . in vitro digestibility appeared a rapid decreasing rate as a mowing period and frequency was delayed (table 2.4).

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권4호
• /
• pp.11-19
• /
• 1993

The experimental study was carried out to investigate the stability and the performance characteristics of the aero-valved pulsating combustion system with maximum operating capacity of 60KW. The effect of geometry of combustion system on the stable condition, the flammability limit, the total pressure oscillation amplitude, and the operating frequency can be identified, and the maximum turn-down-ratio is obtained up to 3.3. The total pressure oscillation amplitude can be controlled by tunning the length of the air inlet pipe. The empirical equation with which the operating frequency can be approximated is proposed and the discrepancy is within 5%. The volumetric efficiency is identified to be one of the important parameters determining the upper flammability limit and the maximum value of which is approximately 22%.

• 한국세라믹학회지
• /
• 제22권1호
• /
• pp.47-52
• /
• 1985

The effect of calcining temperature on planar coupling factor Kp resonance and antiresonance frequency of $Pb(Z_{0.53}Ti_{0.47})O_3$ doped with $Nb_2O_5$ has been investigated. The calcining temperature ranged from $700^{\circ}C$ to 110$0^{\circ}C$ The calcining temperature affected on antiresonance frequency more strongly than the resonance frequency. Therefore the Kp was almost entirely dependent upon the antiresonance frequency. The p and antiresonance frequency of the sample in creased with the calcining temperature reaching a maximum at about 90$0^{\circ}C$ When a poling electric field of 35KV/cm was applied to the sample calcined at 90$0^{\circ}C$ and sintered for two hours at 120$0^{\circ}C$ Kp attained a maximum value of 0.64 which is in good agreement with the results of other investigators.

• 한국자기학회지
• /
• 제3권2호
• /
• pp.115-120
• /
• 1993

화학양론적 조성을 갖는 Ni-Zn ferrite에서 Ni/Zn 비의 변화에 따른 전파흡수체의 성능 평가 지수, 정합주파수 및 정합두께와 자기적인 변수와의 상관관계를 조사하였다. Ni/Zn 비가 감소 할수록 ${\mu}_{r}$의 최대치는 저주파수 영역으로 이동하며 Ni/Zn 비가 1.0인 경우 ${\mu}_{r}$의 값은 다른 조성에 비해 높은 값을 가짐을 확인할 수 있었다. Ni/Zn ferrite 복합제는 1-12 GHz 영역에서 2개의 정합주파수($f_{m1}$, $f_{m2}$)및 정합두께 ($d_{m1}$, $d_{m2}$)가 존재하며 $f_{m1}$은 $f_{r}$(공명주파수)과 비례하며 $f_{m2}$는 포화자화값에 비례함을 확인하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.530-533
• /
• 2009

This study deals with 2D and 3D nonlinear seismic damage analysis of a concrete gravity dam using the finite element program ABAQUS and the concrete damaged plasticity model. 2D and 3D spillway sections of the dam are simulated. First the frequency analysis is conducted to compare the fundamental frequency and estimate the value of damping coefficient. Then the seismic analysis is conducted using the simulated ground acceleration motion. The relative displacement between the crest and bottom of the dam is obtained and compared for the maximum value and occurrence time. The results indicate that the plane-stress assumption gives similar results of maximum relative displacement and final damage distribution with 3D analysis.

• 대한의용생체공학회:의공학회지
• /
• 제22권3호
• /
• pp.259-267
• /
• 2001

The visual evoked potentials(VEPs) is used to assist in the diagnosis of specific disorders associated with involvement of the sensory visual pathways. The P100 latency is an important parameter which is diagnosis of optic nerve disorders. There are characteristics of latency delay, wave distortion, amplitude deduction in abnormal subjects. It is difficult to diagnose in the case of producing peak at the P100 latency. In this paper, difference of pattern between normal VEPs and abnormal VEPs using the Choi-Williams distribution method is studied. We observed the relationship about time and spectrum. The result shown that normal VEPs had maximum spectral value at 20Hz~26.7Hz and abnormal VEPs had maximum spectral value at 16.7Hz~20Hz. Also normal VEPs spectrum is higher than abnormal VEPs spectrum.