• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.19-24
• /
• 2002

According to the field test, the transient power transmission efficiency of a tractor driveline fluctuated in a range of 56 to 86% and the mean value was about 72.5%. Therefore, the constant efficiency model commonly used for a simulation of power performance was not proper far predicting such a variable of efficiency. In order to predict power efficiency more accurately, new concepts of the maximum efficiency and drag torque were introduced and a new model based on the these concepts was proposed. The difference between measured and model-predicted efficiencies was about 1.5% in average with a standard deviation of 1.1%. The new power efficiency model was expected to enhance the accuracy of predicting power transmission efficiencies of tractor drivelines.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2609-2615
• /
• 2013

A series of fluorene-carbazole copolymers containing the pendant phosphor chromophore $Ir(absn)_2(acac)$ (absn: 2-(1-naphthyl)benzothiazole; acac: acetylacetone) were designed and synthesized via Yamamoto coupling. In the film state, these copolymers exhibited absorption and emission peaks at approximately 389 and 426 nm, respectively, which originated from the fluorene backbone. However, in electroluminescent (EL) devices, a significantly red-shifted emission at approximately 611 nm was observed, which was attributed to the pendant iridium(III) complex. Using these copolymers as a single emission layer, polymer light-emitting devices with ITO/PEDOT:PSS/polymer:DNTPD/TmPyPb/LiF/Al configurations exhibited a saturated red emission at 611 nm. The attached iridium(III) complex had a significant effect on the EL performance. A maximum luminous efficiency of 0.85 cd/A, maximum external quantum efficiency of 0.77, maximum power efficiency of 0.48 lm/W, and maximum luminance of 883 $cd/m^2$ were achieved from a device fabricated with the copolymer containing the iridium(III) complex in a 2% molar ratio.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2262-2264
• /
• 1997

In this paper, Maximum Power Point Tracking Method using Fuzzy controller is proposed to improve energy conversion efficiency. The solar cell has an optimum operating point to be able to get maximum power. To obtain maximum power from photovoltatic any, photovoltatic power system usually requires maximum power point tracking controller. The output characteristics of solar cell are nonlinear. To obtain maximum power from photsvoltatic array, the fuzzy controller only uses the output power. Therefore this control method is easy to implement to real system.

• Journal of Korea Multimedia Society
• /
• v.2 no.4
• /
• pp.468-475
• /
• 1999

Learning algorithm of SRNN doesn't use analytic maximum epoch, so that its performance is inefficient and its cost is high. In this paper, with the proper maximum epoch, we improve teaming efficiency. We first describe cost function of maximum epoch and computation time theoretically Then, using it, we propose that maximum epoch must be between 400 and 500. Estimated maximum epoch is verified by experiment.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.503-506
• /
• 2003

The photovoltaic generators have a nonlinear V-I characteristics and maximum power points which vary with the illumination levels and temperatures. Using maximum power point tracker with the intermediate converter can increase the system efficiency by matching the PV systems to the load. A novel MPPT control for photovoltaic system is proposed. The system input parameters are (dP, dI, and last incremental of duty ratio $L\deltaD$)and the output is the new incremental value (new ${\deltaD}$) according to the maximum power point under various illumination levels. Using fuzzy logic controller allows extracting the maximum power rapidly and without significant oscillations. Also FLC provides excellent features such as fast response, good performance and the ability to change the fuzzy parameters to improve control system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.704-710
• /
• 2015

We studied white organic light-emitting diodes using blue fluorescent and red phosphorescent materials. White single OLEDs were fabricated using SH-1 : BD-2 (3 vol.%) and CBP : $Ir(mphmq)_2(acac)$ (2 vol.%) as emitting layer (EML). The white single OLED using SH-1 : BD-2 (3 vol.% 8 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 22 nm) as emitting layer showed maximum current efficiency of 8.8 cd/A, Commission Internationale de l'Eclairage (CIE) coordinates of (0.403, 0.351) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.402{\pm}0.012$, $0.35{\pm}0.002$) from 500 to $3,000cd/m^2$. The white tandem OLED using SH-1 : BD-2 (3 vol.% 12 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 18 nm) showed maximum efficiency of 19.6 cd/A, CIE coordinates of (0.354, 0.365) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.356{\pm}0.016$, $0.364{\pm}0.002$) from 500 to $3,000cd/m^2$. Maximum current efficiency of the white tandem OLED was more twice as high as the single OLED. Our findings suggest that tandem OLED was possible to produce improved efficiency and excellent color stability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.1
• /
• pp.50-55
• /
• 2014

It was firstly found in 1st group element. Recently, it has been reported on the improvement of efficiency of the OLEDs by introducing thin layer of some carbonate materials of alkali metal. In order to improve the efficiency of OLEDs which is one of the next generation displays, we have studied the electrical characteristics of the device depending on the thickness ratio of the hole-injection layer to the electron-injection layer. Teflon-AF was used as the hole-injection material, and alkali-metal carbonates of $Li_2CO_3$ were used as the electron-injection materials. To obtain a proper thickness ratio, we manufactured. Four types of devices with the thickness ratio of HIL to EIL were made to be 1 : 4, 2 : 3, 3 : 2, and 4 : 1. The results of electrical and optical properties showed that the device with the thickness ratio of 4 : 1 is the most excellent result. In addition, to prepare a four-layer device by inserting the ${\alpha}$-NPD is a hole transporting material was compared with three-layer element. As a result, the maximum luminance, the maximum luminous efficiency, maximum external quantum efficiency of about 124 [%], 164 [%], 106 [%] improve was confirmed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.718-724
• /
• 1998

Twelve gilts were used to investigate the effect of lysine to protein ratio (5.2 g lysine/100 g CP vs. 6.7 g lysine/100 g CP) in practical diets on nitrogen retention and the efficiency of utilization in growing pigs. Treatments involved 2 levels of dietary lysine (5.2 or 6.7 g/100 g CP) and 3 levels of dietary crude protein (11, 14 and 17% in diet). Nitrogen retention was greatest when pigs were fed the control diet containing 17% protein. Nitrogen retention progressively increased as dietary protein increased (p < 0.01), but it was not affected by lysine concentration (g/100 g CP). Apparent biological value (ABV, nitrogen retained/apparently digestible nitrogen) was estimated to be ~50% at the maximum nitrogen retention. ABV was not affected by lysine concentration, but declined (p < 0.05) as the dietary protein level increased. The efficiency of intake N used for maximum nitrogen retention was approximately 44%. One gram of lysine supported approximately 9 to 10 g apparent protein accretion (nitrogen retention ${\times}$ 6.25/lysine intake) in pigs fed control diets. The efficiency of lysine utilization for protein accretion was lower in pigs fed high-lysine diets (6.7 g lysine/l00 g CP) so that 1 g of lysine accounted for 7 to 8 g of protein accretion in these pigs (p < 0.01). The lysine required to support maximum nitrogen retention in pigs fed high-lysine diets was higher than that in pigs fed control diets, which suggests that lysine was over-fortified relative to crude protein, since practical diets can not be formulated without excess of some amino acids. In summary the concentration of 5.2 g total lysine/100 g CP in diet is more appropriate for corn-soybean diets than the commonly suggested the content of 6.7 g total lysine/100 g CP.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1356-1364
• /
• 1990

This paper deals with the preliminary design conditions of Stirling Engines based on an adiabatic analysis with regenerator effectiveness. The investigation of thermal regeneration process results that the definition of effectiveness proposed by Urieli et al. is appropriate for the present model. Then, it is applied to the already existing approximate analytic solution for the adiabatic model in order to optimize thermal efficiency as well as work parameter. Results show that thermal efficiency is less sensitive to the variation in design parameters than work. Phase angle for the maximum work is also the most efficient at high values of the effectiveness. Swept volume ratio should be chosen with care. The optimum value of dead volume ratio is at least less than the maximum efficiency condition. The feasible design range in compression ratio lies between the maximum efficiency condition and the structural limit of Stilring Engines, where the higher its value, the better. Changes in the temperature ratio do not alter the design conditions. Working fluids with the specific heat ratio 1.67 are more efficient that those with 1.4.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.53-60
• /
• 2011

In Wireless Sensor Networks, IEEE 802.11 happen unnecessary energy consume because of packet transmission using maximum power between sensor node. The BASIC scheme is to use maximum transmission power for RTS-CTS and minimum required transmission power so as to high energy efficiency for DATA-ACK. However BASIC scheme may degrade network throughput with collision of ACK packet by node in carrier sensing zone and may result in higher energy consumption than when using IEEE 802.11 without power control. Existing PCM(Power Control MAC) scheme is to use DATA packet transmission method by periodically maximum power level so as to sensing DATA packet transmit in carrier sensing zone of transmission node, and this method can avoid collision of ACK packet. This paper present problem by energy efficiency of PCM scheme, and design some more improved PCM scheme.