• KSBB Journal
• /
• v.15 no.3
• /
• pp.274-279
• /
• 2000

A Saccharomyces cerevisiae isolated from a feed additive yeast product was cultivated in a Korean paper digestion wastewater in order to investigate the possibility of using it as substrate for the yeast. The yeast couldn't grow in the wastewater. It could grow in the wastewater diluted and the optimum dilution rate was 7.5 In batch cultivation with the jar fermenter the maximum total cell count was $1.34{\times}107/mL$ was obtained by the addition of undiluted digestion wastewater. By adding $(NH_4)_2S0_4 and KH_2P0_4$together with the undiluted wastewater the maximum cell concentration could be obtained faster.

• Microbiology and Biotechnology Letters
• /
• v.20 no.2
• /
• pp.196-202
• /
• 1992

Zoogloea ramigera 115 was selected for the production of viscous microbial polysaccharide for bioflocculants usage. Batch, fed-batch, and continuous culture processes were examined with regard to the high biopolymer production. Several carbon sources were tested, including glucose, lactose, molasses, and cheese whey. The C/N ratio of 90 was most effective for biopolymer production from glucose, while the C/N ratios of 30 for lactose and 60 for both molasses and cheese whey substrate gave a maximum production. Fed batch culture proved more effective to increase final biopolymer concentration than batch culture. Continuous fermentation with two stages modifying C/N ratio increased the productivity. The production rates were a maximum at dilution rate of 0.048 $hr^{-1}$ for molasses and at 0.096 $hr^{-1}$for cheese whey.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.2
• /
• pp.89-94
• /
• 2002

The continuous production of citric acid from dairy wastewater was investigated using calcium-alginate immobilized Asrergillus niger ATCC 9142. The citric acid productivity and yield were strongly affected by the culture conditions. The optimal pH, temperature, and dilution rate were 3.0, 30$^{\circ}C$, and 0.025 h$\^$-1/, respectively. Under optimal culture conditions, the maximum productivity, concentration, and yield of citric acid produced by the calcium-alginate immobilized Aspergillus niger were 160 mg L$\^$-1/ h$\^$-1/, 4.5 g/L, and 70.3%, respectively, The culture was continuously perfored for 20 days without any apparent loss in citric acid productivity. Conversely, under the same conditions with a batch shake-flask culture, the maximum productivity, citric acid concentration, and yield were only 63.3 mg L$\^$-1/h$\^$-1/, 4.7 g/L and 51.4%, respectively, Therefore, the results suggest that the bioreactor used in this study could be potentially used for continuous citric acid production from dairy wastewater by applying calcium-alginate immobilized Aspergillus niger.

• Journal of Mechanical Science and Technology
• /
• v.15 no.10
• /
• pp.1442-1450
• /
• 2001

The EGR system has been widely used to reduce nitrogen oxides (NO$\_$x/) emission, to improve fuel economy and suppress knock by using the characteristics of charge dilution. However, as the EGR rate at a given engine operating condition increases, the combustion instability increases. The combustion instability increases cyclic variations resulting in the deterioration of engine performance and emissions. Therefore, the optimum EGR rate should be carefully determined in order to obtain the better engine performance and emissions. An experimental study has been performed to investigate the effects of EGR on combustion stability, engine performance,70x and the other exhaust emissions from 1.5 liter gasoline engine. Operating conditions are selected from the test result of the high speed and high acceleration region of SFTP mode which generates more NO$\_$x/ and needs higher engine speed compared to FTP-75 (Federal Test Procedure) mode. Engine power, fuel consumption and exhaust emissions are measured with various EGR rate. Combustion stability is analyzed by examining the variation of indicated mean effective pressure (COV$\_$imep/) and the timings of maximum pressure (P$\_$max/) location using pressure sensor. Engine performance is analyzed by investigating engine power and maximum cylinder pressure and brake specific fuel consumption (BSFC)

• Microbiology and Biotechnology Letters
• /
• v.2 no.1
• /
• pp.29-35
• /
• 1974

We have studied the applicability of the principles and inherent advantages of the two-stage dontinuous uclture technique to an enzyme process for the purpose of improving and optimizing the productivity of 3-ketosteroid-delta-1-dehydrogenase. By using a two-stage continuous culture system, the growth st ageand enzyme produdtion stage are separated. In each stage an optimal set of toperaing conditions was determined, and this was tested for feasibility for the period of 10 days. During this period, at least 70％ of the maximum enzyme productivity could be maintained. The important design parameters studied are: (1) optimal specific growth rate in the first stage which corresponds to the maximal cell productivity, (2) the optimal dilution rate in the second stage which in turn determines the size of second stage fermentor and the mean residence time of cells in the second stage, (3) cell concentration in both stages, add (4) the specific enzyme productivity and enzyme productivity of the second stage. In addition, by using two-stage continuous culture system we have been able to reduce or eliminate the effect of catabolite repression due to high medium concentration and the adverse effect of the solvent used to dissolve the inducer. We have found the balance between the opposing effects of induction and repression in the second stage judging from the observation that the enzyme productivity goes through a maximum.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.712-720
• /
• 2007

To investigate clonal variations of recombinant Chinese hamster ovary(rCHO) clones in response to culture pH and temperature, serum-free suspension cultures of two antibody-producing CHO clones(clones A and B), which were isolated from the same parental clone by the limiting dilution method, were performed in a bioreactor at pH values in the range of 6.8-7.6, and two different temperatures, $33^{\circ}C\;and\;37^{\circ}C$. In regard to cell growth, clone A and clone B displayed similar responses to temperature, although their degree of response differed. In contrast, clones A and B displayed different responses to temperature in regard to antibody production. In the case of clone A, no significant increase in maximum antibody concentration was achieved by lowering the culture temperature. The maximum antibody concentration obtained at $33^{\circ}C$(pH 7.4) and $37^{\circ}C$(pH 7.0) were $82.0{\pm}2.6$ and $73.2{\pm}4.1{\mu}g/ml$, respectively. On the other hand, in the case of clone B, an approximately 2.5-fold increase in maximum antibody concentration was achieved by lowering the culture temperature. The enhanced maximum antibody concentration of clone B at $33^{\circ}C$($132.6{\pm}14.9{\mu}g/ml$ at pH 7.2) was due to not only enhanced specific antibody productivity but also to prolonged culture longevity. At $33^{\circ}C$, the culture longevity of clone A also improved, but not as much as that of clone B. Taken together, CHO clones derived from the same parental clone displayed quite different responses to culture temperature and pH with regards antibody production, suggesting that environmental parameters such as temperature and pH should be optimized for each CHO clone.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.2
• /
• pp.19-25
• /
• 2021

Purpose: The purpose of this study is to reduce odor complaints by identifying problems with odor management at the site of the water regeneration center and researching odor management methods. Due to the high population density of Korea, sewage treatment facilities are adjacent to residential and industrial areas. According to previous studies, the main malodor-emitting facilities of sewage treatment facilities were preliminary treatment facilities (2,220 times), sedimentation basins (4,628 times), and sludge treatment facilities (9,616 times). Research design, data and methodology: Compound malodors and designated malodor-producing substances were collected from five site boundaries of the water regeneration center and analyzed according to the official methods to test malodor, and a total of two times (August and September 2020) were conducted. Results: As a result of the measurement, in the green area in front of the center office, compound malodors were detected at a maximum of 8 times and at least 3 times during the dawn time. As for the designated malodor-producing substances, 0.1ppm of ammonia was detected in the green area in front of the center office and the park golf course. This is within 15 times the maximum allowable emission level of compound malodors and within 1ppm of the maximum allowable emission level of ammonia. Conclusions: Even if the dilution rate of the compound malodors did not exceed the maximum allowable emission level, the odor could be recognized, and more research is needed in the future to establish effective reduction measures according to the subjective and individual and seasonal odor characteristics.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.455-461
• /
• 2000

Abstract Spirulina platensis was grown in SWlUe waste to reduce inorganic compowlds and simultaneously produce feed resources. Spirulina platensis prefers nitrogenous compounds in Ibe order: $NH_4^{+}-N>NO_3^{-}-N>simple-N$ such as urea and simple amino acids. It even consumes $NH_4^{+}-N$ first when urea or nitrate are present. Therefore, the content of residual $NH_4^{+}-N$ in Spimlina platensis cultures can be determined by the relative extent of the following processes: (i) algal uptake and assimilation; (ii) ammonia stripping; and (iii) decomposition of urea to NH;-N by urease-positive bacteria. The removal rates of total nitrogen ffild total phosphorus were estimated as an indicator of the treatment effIciency. It was found that Spirulina platensis was able to reduce 70-93% of $P_4^{3-}-P$, 67-93% of inorganic nitrogen, 80-90% of COD, and 37-56% of organic nitrogen in various concentrations of swine waste over 12 days of batch cultivation. The removal of inorganic compounds from swine waste was mainly used for cell growth, however, the organic nitrogen removal was not related to cell growlb. A maximum cell density of 1.52 dry-g/l was maintained with a dilution rate of 0.2l/day in continuous cultivation by adding 30% swine waste. The nitrogen and phosphorus removal rates were correlated to the dilution rates. Based on the amino acid profile, the quality of the proteins in the Spirulina platensis grown in the waste was the same as that in a clean culture.ulture.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.4
• /
• pp.278-283
• /
• 1992

Aldehyde production by cells of a methanol utilizing yeast, Hansenula nonfermentans KYP-1 was improved when they were grown in a methanol-limited continuous culture, in comparison with cells grown in a batch culture. A higher cell yield was also obtained in continuous culture than in batch culture. This could be due to the fact that a lower methanol concentration was maintained in the jar fermentor to minimize growth inhibition by methanol. A maximum cell productivity of 0.219 g.$liter^{-1}.hr^{-l}$ and a cell yield of 47% were obtained at dilution rates of 0.1 $hr{-1}$ and 0.06 hr{-1}, respectively. The greatest amount of aldehyde was measured at a dilution rate of 0.08 $hr{-1}$. Under optimum reaction conditions, 915.7 mM of acetaldehyde was produced from 1.5 M ethanol after 21 hours reaction, with a conversion rate of 61%. Propionaldehyde and acrolein were produced with conversion rates of 32.7% and 44%, respectively.

• Applied Biological Chemistry
• /
• v.39 no.6
• /
• pp.488-493
• /
• 1996

As a first step of pesticide runoff studies, runoff losses of captafol were measured under natural rainfall conditions in apple orchard area. The maximum concentration of captafol was 180 ppb at 5 th sampling period when the rainfall occurred within 24 hours after captafol was applied, and the concentration of samples from other periods was below than 20 ppb. Total runoff loss of captafol was below 0.1%. About 10 fold of dilution factor was observed at the merging point with stream near outlet from orchard and about 50 fold was observed at the next merging point which is located further down. Therefore, captafol will not harm the aquatic organisms due to dilution factor$(10{\sim}50\;fold)$ and rapid hydrolytic degradation rate even when it was run off into a stream nearby.