• 제목/요약/키워드: Maximum amplitude

검색결과 761건 처리시간 0.03초

초음파 응답특성 분석에 의한 위장 경화 진단시스템의 설계 (Design of Gastrointestinal Diagnosis System based on Ultrasonic Response Characteristics)

  • 임도형;김은근;이균정;박원필;김한성;신태민;최서형;이용흠
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권2호
    • /
    • pp.250-257
    • /
    • 2007
  • Functional gastrointestinal disorders affect millions of people of all age regardless of race and sex. There are, however, rare diagnostic methods for the functional gastrointestinal disorders because functional disorders show no evidence of organic and physical causes. Our research group identified recently that the gastrointestinal tract well in the patients with the functional gastrointestinal disorders becomes more rigid than healthy people when palpating the abdominal regions overlaying the gastrointestinal tract. The aim is, therefore, to develop a diagnostic method for the functional gastrointestinal disorders based on quantitative measurement of the rigidity of the gastrointestinal tract well using ultrasound technique. For this purpose, a preliminary ultrasound diagnostic system was developed and verified through phantom tests. The system consisted of transmitter, ultrasonic transducer, receiver, TGC, and CPLD, and verified via a phantom test. For the phantom test, ten soft-tissue specimens were harvested from porcine. Five of them were then treated chemically to mimic a rigid condition of gastrointestinal tract well, which was induced by functional gastrointestinal disorders. Additionally, the specimens were tested mechanically to identify if the mimic was reasonable. The customized ultrasound system was finally verified through application to human subjects with/without functional gastrointestinal disorders(Normal and Patient Groups). It was identified from the mechanical test that the chemically treated specimens were more rigid than normalspecimen. This finding was favorably compared with the result obtained from the phantom test. The phantom test also showed that ultrasound system well described the specimen geometric characteristics and detected an alteration in the specimens. The maximum amplitude of the ultrasonic reflective signal in the rigid specimens $(0.2{\pm}0.1Vp-p)$ at the interface between the fat and muscle layers was explicitly higher than that in the normal specimens $(0.1{\pm}0.0Vp-p)$ (p<0.05). Clinical tests using our customized ultrasound system for human subject showed that the maximum amplitudes of the ultrasonic reflective signals nea. to the gastrointestinal tract well for the patient group$(2.6{\pm}0.3Vp-p)$ were generally higher than those in normal group$(0.1{\pm}0.2Vp-p)$ (p<0.05). These results suggest that newly designed diagnostic system based on ultrasound technique may diagnose enough the functional gastrointestinal disorders.

광학 센서를 이용한 비관혈적 혈압 측정의 오차 보정 (Compensation of Error in Noninvasive Blood Pressure Measurement System Using Optical Sensor)

  • 고재일;정인철;이동희;박신우;황성오;박소미;김기연;주현실;윤형로
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권2호
    • /
    • pp.178-186
    • /
    • 2007
  • This study is attempted to correct an error of electronic blood pressure meter with an optical sensor. In general, for a hospitalized patient, ECG, blood pressure, oxygen saturation, and respiration are basically measured to monitor the patient's condition. Opening of a blood vessel after it is occluded by pressurizing the cuff influences the blood flow of peripheral blood vessels as well as oscillation changes in the cuff. Blood vessels are occluded and peripheral blood flow disappears at cuff pressure above the examinee's blood pressure, while blood vessels are opened and peripheral blood flow appears again at cuff pressure under the examinee's blood pressure. Then Disappear-Appear Point Length(DAPL) of peripheral blood flow can be judged with the signal of peripheral blood flow, thus is available as a factor of error correction for electronic blood pressure meter. Also, systolic or diastolic blood pressure can be corrected with Appear-Point-Pressure(APP) of cuff pressure at a point where blood flow occurs and Appear-Maximum Pressure(AMP) of cuff pressure at the maximum amplitude point of peripheral blood flow after peripheral blood flow appears again. For verification, 27 examinees were selected, and their blood value was obtained through experimental procedure of 4 stages including induction of blood pressure change. The examinees were divided into two groups of experimental group and control group, regression analysis was conducted for experimental group, and correction of a blood pressure error was verified with optical signal by applying the regression equation calculated in experimental group to control group. As an experimental result, mean of the whole measurement errors was 5mmHg or more, which did not meet the standard fur blood pressure meter. As a result of correcting blood pressure measurements with data of DAPL, APP, and AMP as drawn out of PPG signal, systolic blood pressure, mean blood pressure, and diastolic blood pressure were $-0.6{\pm}4.4mmHg,\;-1.0{\pm}3.9mmHg$ and $-1.3{\pm}5.4mmHg$, respectively, indicating that mean of the whole measurement errors was greatly improved, and standard deviation was decreased.

저자장 자기공명영상시스템에서 선주사확산강조영상기법 개발 (Development of the Line Scan Diffusion Weighted Imaging at Low Tesla Magnetic Resonance Imaging System)

  • 홍철표;이동훈;이도완;이만우;백문영;한봉수
    • 한국방사선학회논문지
    • /
    • 제2권2호
    • /
    • pp.31-38
    • /
    • 2008
  • 0.32 T 자기공명영상시스템에서 선주사영상기법(line scan imaging)을 이용한 확산강조영상(diffusion weighted imaging; DWI) 펄스열(pulse sequence)을 개발하였다. 선주사영상은 단면선택 경사자장과 함께 90도 펄스를 가하여 단면을 선택한 후 y 방향으로 경사자장을 가한 후 180도 라디오파 펄스를 가하여 단면영상의 y-방향 픽셀크기와 같은 너비의 x축에 평행한 띠를 따라 에코가 발생하게 한 뒤 x-방향으로 주파수부호화해서 1차원 k-공간 데이터를 획득하며 이를 1차원 푸리에변환하여 영상을 재구성하였다. 또한 선주사확산강조영상(line scan diffusion weighted image)을 위해서 한 쌍의 사다리꼴모양의 경사자장을 선주사영상기법의 180도 펄스 전후에 대칭으로 배치하였으며 사용된 확산경사자장기울기의 최대값은 G = 15 mT/m 이었고 최대 b 값은 $301.50s/mm^2$이었다. 본 연구에서 개발된 선주사확산강조펄스열을 이용하여 0.32 T 자기공명영상 장비에서 트리아실글리세롤 팬텀(triacylglycerol, TAG) 및 염화나트륨 수용액 (NaCl = 0.1w/v%) 팬텀 영상을 획득하였다. 또한 1.5 T 자기공명영상시스템에서 단일여기에코평면영상화(single shot echo planar imaging)로 동일한 팬텀의 확산강조영상을 구하였다. 선주사확산강조영상은 가장 널리 이용되고 있는 에코평면영상을 이용한 확산강조영상과 비교하여 자화율차이에 의한 영상왜곡이나 화학이동에 의한 허상들이 없음을 확인하였다. 특히 선주사확산강조영상에서 측정한 염화나트륨 수용액 팬텀의 확산계수($963.90{\pm}79.83{\times}10^{-6}mm^2/s$)는 1.5 T에서 계산된 확산계수($956.77{\pm}4.12{\times}10^{-6}mm^2/s$)와 오차범위 내에서 일치하였다.

  • PDF

한국 남서해 다도해역의 조석·조류 특성 (Tide and Tidal Currents Around the Archipelago on the Southwestern Waters of the South Sea, Korea)

  • 추효상;김동선
    • 해양환경안전학회지
    • /
    • 제19권6호
    • /
    • pp.582-596
    • /
    • 2013
  • 한국 남서해 다도해역 주변의 조석 조류특성을 파악하기 위해 2차원 수치모델을 이용하여 다도협수로역, 섬과 육지사이 수로역, 섬 주변 개방해역 주변 4개 해역의 조석 조류 계산 결과를 비교하였다. 조류 최대유속은 다도협수로역에서 31.92 cm/s로 작았고, 섬주변 개방역에서 87.55 cm로 컸다. 조석잔차류는 협수로가 길고 수로 내 섬이 많은 해역에서 컸다. 조석에너지 분산과 조석진폭의 변동범위는 다도협수로역($392.6{\times}10^7$ erg/s, 99.0 cm)이 가장 크고 섬과 육지사이 수로역($125.7{\times}10^7$ erg/s, 11.6 cm), 섬 주변 개방역($23.1{\times}10^7$ erg/s, 8.1 cm) 순서로 작았다. 즉 다도해역 내 협수로와 수심의 급격한 변화가 조석에너지 분산에 큰 역할을 하고 있는 것으로 나타났다.

QAM 시스템에서 DSE-MMA 블라인드 등화 알고리즘의 성능 평가 (Performance Evaluation of DSE-MMA Blind Equalization Algorithm in QAM System)

  • 강대수
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권6호
    • /
    • pp.115-121
    • /
    • 2013
  • 본 논문은 송신 부호가 대역 제한, 위상 찌그러짐이 존재하는 비선형 통신 채널을 통과할 때 발생되는 부호간 간섭을 보상하기 위한 블라인드 등화 알고리즘인 SE-MMA (Signed-Error MMA)의 roburstness 성능을 개선할 수 있는 DSE-MMA (Dithered Sign-Error MMA)에 관한 것이다. SE-MMA는 등화기의 탭 계수 갱신을 위하여 곱셈 대신 1 bit 양자화기를 사용하므로 알고리즘의 연산량을 줄일 수 있어 H/W 응용에 유리하지만, 양자화 과정에서 발생되는 정보 손실에 의하여 전체적인 블라인드 등화 성능 알고리즘이 MMA보다 열화되는 단점이 있다. DSE-MMA는 SE-MMA의 단점 중에서 roburstness를 나타내는 SER 성능을 개선키 위하여 양자화 전에 dither 신호를 이용하는 Dithered Signed-Error 개념을 MMA에 적용하였으며, SE-MMA 와 MMA 알고리즘이 갖는 부호간 간섭에 의한 진폭과 위상 찌그러짐을 동시 보상 능력을 갖는다. 논문에서 DSE-MMA 블라인드 등화 알고리즘의 성능을 나타내는 지수로는 등화기 출력 신호, 잔류 isi, MD (Maximum Distortion), MSE와 SER를 사용하였으며, 이들 성능 지수를 적용할 때 SE-MMA 알고리즘과 비교하기 위하여 컴퓨터 시뮬레이션을 수행하였다. 시뮬레이션 결과 DSE-MMA가 SE-MMA 보다 roburstness 와 정상 상태 이후 성능 지수의 양에서 개선됨을 알 수 있었지만, 초기 상태에서 정상 상태에 도달하는 수렴 속도에서는 늦어짐을 확인하였다.

PIV를 이용한 초음파 진동에 의해 유도된 음향유동의 가시화 (Flow Visualization of Acoustic Streaming Induced by Ultrasonic Vibration Using Particle Imaging Velocimetry)

  • 노병국;권기정;이장연;이동렬
    • 한국소음진동공학회논문집
    • /
    • 제14권6호
    • /
    • pp.528-535
    • /
    • 2004
  • Ultrasonic Vibrator is designed to achieve the maximum vibration amplitude at 30 kHz by in-cluding a horn (diameter, 40 mm), mechanical vibration amplifier at the top of the ultrasonic vibrator in the system and making the complete system resonate. In addition, it is experimentally visualized by particle imaging velocimetry (PIV) that the acoustic streaming velocity in the gap is at maximum when the gap between the ultrasonic vibrator and stationary plate agrees with the multiples of half-wavelength of the ultrasonic wave. This fact results from the resonance of the sound wave and the theoretical analysis of that is also accomplished and verified by experiment. It is observed that the magnitude of the acoustic streaming dependent upon the gap between the ultrasonic vibrator and stationary plate possibly changes due to the measurement of the average velocity fields of the acoustic streaming induced by the ultrasonic vibration at resonance and non-resonance. There exists extremely small average velocity at non-resonant gaps while the relatively large average velocity exists at resonant gaps compared with non-resonant gaps. It also reveals that there should be larger axial turbulent intensity at the hub region of the vibrator and at the edge of it in the resonant gap where the air streaming velocity is maximized and the flow phenomena is conspicuous than that at the other region. Because the variation of the acoustic streaming velocity at resonant gap is more distinctive than that at non-resonant gap, shear stress increases more in the resonant gap and is also maximized at the center region of the vibrator except the local position of center (r〓0). At the non-resonant gap there should be low values of vorticity distribution, but in contrast to the non-resonant gap, high and negative values of it exist at the center region of the vibrator with respect to the radial direction and in the vicinity of the middle region with respect to the axial direction. Acoustic streaming is noise-free due to the ultrasonic vibration and maintenance-free because of the absence of moving parts. Moreover, the proposed method by acoustic streaming can be utilized to the nano and micro-electro mechanical systems as a driving mechanism in addition to the augmentation of the streaming velocity.

벼 등숙기간중 $CO_2$ 동화율, 기공전도도 및 수용성 탄수화물 농도의 내생 리듬 (Endogenous Rhythms of $CO_2$ Assimilation, Stomatal Conductance and Soluble Carbohydrate Concentration during Grain Filling in Rice)

  • 현동윤
    • 한국작물학회지
    • /
    • 제40권5호
    • /
    • pp.556-561
    • /
    • 1995
  • 등숙기간중 벼의 탄소동화율과 기공전도도 그리고 수용성 탄수화물농도의 내생리듬을 알아보기 위하여 자연상태의 광주기 조건에서 재배된 벼를 일정한 환경조건으로 옮긴 다음 지엽을 대상으로 이들의 반응을 관찰하였다. 자연상태의 광조건에서 성장한 벼의 탄소동화율은 약 24시간을 1주기로 하여 일정한 진폭으로 변화되었으며, 정오에 최고에 달하고 한밤중에 최저에 이르나 72시간이 경화할 때 쯤 변화의 폭은 점차적으로 줄어 들어 120시에는 최고, 최저에 도달하는 시각이 바뀌어 정오에 최저에 달하고 한밤중에 최고에 이르는 현상을 나타내었다. 이와 같은 반응은 기공전도도에서도 찾아볼 수 있어 이들 관계는 매우 밀접함을 보였다. 반면, 개화 후 14일 동안 낮과 밤 모두 일정한 광조건에서 성장한 벼의 탄소동화도율과 기공전도도의 반응은 전자와 같이 주기적인 폭의 변화를 찾아볼 수 없었다. 잎내의 수용성 탄수화물 농도의 변화 또한 탄소동화율과 기공전도도의 변화에서 나타나는 현상과 일치하는 경향을 보였다. 이상에서 탄소동화율과 기공전도도 그리고 수용성 탄수화물의 내생림듬은 작물에 부분적으로 중요한 역할을 하고 있음을 시사하며, 또한 이들은 광주기(photoperiod)에 의존적이기 때문에 광주기가 탄소동화작용 및 수용성 탄수화물 형성에 중요한 조절 요인으로 작용하고 있음을 시사한다.

  • PDF

음성장애에 대한 임상적고찰 (Clinical Observation on Voice Disorder)

  • 이종원
    • 대한기관식도과학회:학술대회논문집
    • /
    • 대한기관식도과학회 1979년도 제13차 학술대회 연제순서 및 초록
    • /
    • pp.7.2-8
    • /
    • 1979
  • 음성외과는 발성기능를 취급하는 기능외과이기 때문에 수술적응의 결정 수술효과의 판정 수술성적의 비교를 위하여 발성기능의 검사가 필요하다. 청력을 취급하는 수술에서 청력검사가 필요한 것과 같다. 연자는 구유미대학 이비인후과를 방문한 각종후두환자(56례 즉Recurrent laryngeal nerve paralysis, polyp. polipoid vocal cord. sulcus vocalis, Laryngeal cancer, Benign mass, Epitherial hypertrophy. 등에서 발성지적시간, 폐활량/담성지적시간, 평균호기유율 및 후두 Stroboscopy 검사를 시행하여 다음과같은 결과를 얻었다. 1) 성대의 편측성병변은 35례(62.5%)이고 양측성병변은 21례(37.5%)로 편측성병변이 많았다. 2) 성별로는 남성이 39례(69.8%) 여성이 17례(30.2%)로 남성이 많았다. 3) 발성지적시간은 10초이하가 26례(46.4%) 10초이상이 30례(53.6%)이였다. 4) 폐활양/발성지적시간은 300m1/sec이하가 33례(58.9%) 300m1/sec이상이 23례(41.1%)이였다. 5) 평균호기류율은 300m1/sec이하가 37례(66.1%)300ml/sec 이상이 19례(33.9%)이였다. 6) 후두 stroboscopy 검사에서 성대의 대칭성, 규칙성, 진폭, 점막파동 및 성문패쇄에 대해서 관찰하였다. 7) 후두수술전후의 음성검사와 stroboscopy 검사의 비교는 수술후의 성적이 매우 좋다.

  • PDF

건조사질토의 동적거동 -수직진동에 의한 연구 (The Behavior of Dry Sand under Dynamic Loading -A Study on the Vertical Vibration)

  • 김수일;정상섬;안영훈
    • 한국지반공학회지:지반
    • /
    • 제11권4호
    • /
    • pp.37-48
    • /
    • 1995
  • 본 연구에서는 수직가속도를 일으키는 진동실험을 통하여 정규진동 및 무작위 진동시의 건조 사질토에 대한 동적거동을 분석하였다. 실험결과로부터 진동가속도와 상대밀도의 관계곡선을 제안하였으며, 여러가지 상재하중하에서의 거동특성을 규명하였다. 실험에는 완전건조된 사질토를 사용하였으며, 입경별로 4개의 시료로 나누고, 현장입경상태를 재현한 시료를 더하여 총 5개의 시료를 사용하였다. 정규진동실험의 경우, 진동진폭은 0.4mm~0.6mm로 유지하고 진동주파수를 3~40Hz 범위에서 변화시키면서 가속도에 따른 시료의 상대밀도 변화를 측정하였다. 무작위진동실험의 경우, 무작위파 발생기를 이용하여 무작위진동파와 10~50Hz 범위의 정규진동파가 조합된 합성파를 발생시키고, 가속도센서로 가속도를 측정하면서 상대밀도의 변화를 측정하였다. 본 연구결과, 수직가속도만으로 사질토를 94%~99%의 상대밀도까지 다질 수 있었으며, 최대 상대 밀도를 발생시키는 수직가속도는 시료가 최소 건조 단위 중량일 때의 간극비와 최대 건조 단위 중량일 때의 간극비 차이에 비례하는 것을 알 수 있었다. 또한, 상재하중을 가하지 않은 경우가 상재하중을 가한 경우보다 시료의 상대밀도변화가 크게 나타탔으며, 상재하중이 클수록 상 대밀도의 변화가 일어나는 가속도가 커짐을 알 수 있었다.

  • PDF

HT-60강 용접부의 SCC및 AE신호특성에 관한 연구 (Study on Characteristics of SCC and AE Signals for Weld HAZ of HT-60 Steel)

  • 나의균;유효선;김훈
    • 비파괴검사학회지
    • /
    • 제21권1호
    • /
    • pp.62-68
    • /
    • 2001
  • 인공해수에서 HT-60강 용접부의 응력부식균열(SCC)과 음향방출(AE)신호특성을 알아보기 위하여 SCC외 AE실험을 동시에 실시하였으며, 양 실험결과를 상호 비교 분석하였다. 모재의 경우, -0.8V에서 보다 긴 파단수명을 보였고, 용해기구 등으로 인하여 -0.8V에 비해 -0.5V에서 AE가 많이 발생하였다. 그러나 시험편에 가해진 전위 값에 관계없이 최대하중 이후의 영역에서 AE 발생 수는 감소하였다. 용접재의 경우, 모재 및 후열처리재와는 달리 용접부의 특이성 때문에 많은 AE 발생과 큰 진폭의 범위$(40{\sim}100dB)$를 나타내었으며 최대하중 이후에도 AE 발생이 활발하였다. 또한, 보다 크고 많은 균열이 파단면에 형성되었음을 SEM관찰을 통하여 관찰할 수 있었으며, 이들 결과로부터 용접부는 인공해수에서 SCC현상이 가장 심하게 일어나고 있음을 확인할 수 있었다. 후열처리는 용접부의 연화를 초래하였고, 용접재에 비해 부식환경에 대한 민감도를 떨어뜨리는 효과를 가져왔다.

  • PDF