• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.19-28
• /
• 2005

We establish a statistical model for the ultra-wide bandwidth (UMB) indoor channel based on over 2000 frequency response measurements campaign in a Practical apartment. The approach is based on the investigation of the statistical properties of the multipath profiles measured in different place with different rooms. Based on the experimental results, a characterization of the propagation channel from theoretic view point is described. Also we describe a method for measurement of the channel impulse response and channel transfer function. Using the measured data, the authors compares channel impulse responses obtained from time-domain and channel transfer functions obtained from frequency-domain with statistical path loss model. The bandwidth of the signal used in this experiment is from 10MHz to 8.01 GHz. The time-domain results such as maximum excess delay, men excess delay and ms delay spread are presented. As well as, omni-directional biconical antenna were used for transmitter and receiver In addition, measurements presented here support m channel model including the antenna characteristics.

• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.130-139
• /
• 2014

Due to the unpredictable nature of channel availability, carrying delay-sensitive traffic in cognitive radio networks (CRNs) is very challenging. Spectrum leasing of radio resources has been proposed in the so called coordinated CRNs to improve the quality of service (QoS) experienced by secondary users (SUs). In this paper, the performance of coordinated CRNs under fixed-rate with hard-delay-constraints traffic is analyzed. For the adequate and fair performance comparison, call admission control strategies with fractional channel reservation to prioritize ongoing secondary calls over new ones are considered. Maximum Erlang capacity is obtained by optimizing the number of reserved channels. Numerical results reveal that system performance strongly depends on the value of the mean secondary service time relative to the mean primary service time. Additionally, numerical results show that, in CRNs without spectrum leasing, there exists a critical utilization factor of the primary resources from which it is not longer possible to guarantee the required QoS of SUs and, therefore, services with hard delay constraints cannot be even supported in CRNs. Thus, spectrum leasing can be essential for CRN operators to provide the QoS demanded by fixed-rate applications with hard delay constraints. Finally, the cost per capacity Erlang as function of both the utilization factor of the primary resources and the maximum allowed number of simultaneously rented channels is evaluated.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.123-130
• /
• 2000

It is important interest for us to solve skew problem in intermedia synchronization and to solve jitter problem in intramedia synchronization. It propose multimedia synchronization model to represent mixed media which contain temporal media and spatial media, and that helps us to develop multimedia application software efficiently. The proposed paper use four parameters to deal with QoS of intermedia synchronization and relative duration time algorithm and jitter-compensatory time algorithm are presented. When key medium is destroyed we make a delay as much as maximum delay jitter of the key medium in order to playout the other medium as much as that. The result is that the application of maximum delay jitter improves the service quality.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1542-1550
• /
• 2013

This paper presents new results on delay-dependent global exponential stability for uncertain linear systems with interval time-varying delay. Based on Lyapunov-Krasovskii functional approach, some novel delay-dependent stability criteria are derived in terms of linear matrix inequalities (LMIs) involving the minimum and maximum delay bounds. By using delay-partitioning method and the lower bound lemma, less conservative results are obtained with fewer decision variables than the existing ones. Numerical examples are given to illustrate the usefulness and effectiveness of the proposed method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.351.1-355
• /
• 1998

Network-based real-time multimedia applications require guaranteed performances of communication service. Also according to increased bandwidth and processing performance in the future high speed networks, it is possible to make multimedia real-time applications such as distributed real-time applications including video conference, medical imaging, and video education. These applications have characteristics of stringent performance requirements in terms of delay, delay jitter and maximum loss rate. This paper proposes a new delay control for Broadband networks with FCFS queueing. The delay control provides an alternative solution to a current problem in real-time communication; traffic distortion, which makes it difficult to meet such real-time requirements. In simulations, it shows that the proposed delay control can guarantee local and end-to-end delay.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.6
• /
• pp.629-636
• /
• 1988

The reduction of recovery time for delay, in the train movements, is generally realized through train operations in the shortest running time and it leads to maximum energy consumption. At the region of this shortest running time, the amount of energy consumption is sharply reduced according to the running time. So the effect for the energy savings can be largely obtained by furnishing a little spare time on train operations. In this paper, it has been modelized the delay and it's enlargement phenomena and formualted the relief patterns in order to restore the delay by restraint and relief of precedent traints. Also it has been proved the number of relief trains for minimum energy consumption exists and then represented one example of relief patterns.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.153-158
• /
• 1996

Delay and jitter are critical factors in the real-time video services over ATM network. Mostly, delay and jitter problem are generated in input buffer when video are multiplexed. In this paper, we analyze delay and jitter of input buffer, and consider efficient control and flexible bandwidth allocation of video traffic. Also, we analyze decision of buffer size related maximum allowable delay.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.10-18
• /
• 2017

In this study, Rock deformation at the artificially advanced face was investigated by using the finite element code relating to the split blasting conducted in urban area. The maximum principal strain according to the detonation pattern and the detonation delay time at the rock surface was compared with the modeled blast section. As a result, it was found that the maximum principal strain was observed a difference depending on the detonation pattern at the rock surface, and the detonation delay time was an important parameter in split blasting.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.1-8
• /
• 2010

This paper models a symbol timing offset (STO) with respect to the guard period and the maximum access delay time for asynchronous multicarrier code division multiple access (MC-CDMA) uplink systems over frequency-selective multipath fading channels. Analytical derivation shows that STO causes desired signal power degradation and generates self-interferences. This effect of the STO on the average bit error rate (BER) and the effective signal-to-noise ratio (SNR) is evaluated. The approximated BER and the SNR loss caused by STO are then obtained as closed-form expressions. The tightness between the analytical result and the simulated one is verified for the different STOs and SNRs. Furthermore, the derived analytical results are verified via Monte Carlo simulations.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.162-166
• /
• 2007

In this paper, we propose a WDM optical true time-delay (OTTD) beam former for phased way antenna (PAA) systems. It is composed of a delay lines matrix and a multiwavelength source with discrete DFB laser diodes. The building block of a delay lines matrix is a $2\times2$ optical MEMS switch with proper fiber-optic delay line connected between cross ports. A $4\times3$ matrix using four DFB lasers has been fabricated with unit time-delay difference of 12 ps. Maximum time-delay error was measured to be -1.74 ps and +1.14 ps at a radiation angle of $46.05^{\circ}$, corresponding to error range of $-2.87^{\circ}\sim+1.88^{\circ}$. By measuring time-delays at six different RF frequencies from 5- to 10-GHz, we verified the true time-delay characteristic of our OTTD.