• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.755-759
• /
• 2013

A broad-band underwater acoustic transducer that uses thickness vibration mode, derived from a disk type piezoelectric ceramic, has been proposed and designed for DVL (Doppler Velocity Log). Three different types of acoustic transducer were evaluated with respect to the transmitting voltage response, receiving voltage sensitivity and bandwidth of the transducer. The effect of the acoustic impedance matching layer and backing layer is discussed. The results demonstrated that three matching layer with lossy backing layer is the best configuration for underwater transducer. The trial underwater acoustic transducer with three matching layer has a frequency bandwidth of 55%, maximum transmitting voltage response of 200 dB and a maximum receiving voltage sensitivity of -187.3 dB.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.304-311
• /
• 1998

An algorithm to enhance spectra matching of acceleration time history used in the seismic analysis of nuclear power plants(NPP) is proposed. The new scheme provides the solution on the highly fluctuating and over conservatism problems that happened in order to satisfy design spectrum enveloping criteria in the traditional method. To obtain optimized spectrum for a time history, a spectrum matching procedure that adapts a system identification technique is also developed. The algorithm also introduces maximum displacement control, baseline correction, clipping and raising of maximum peak of time history, and power spectral density (PSD) control of time history. It is verified through numerical examples that this new scheme can definitely generate acceleration time history, closely matching the target spectra and satisfying other stipulated requirements.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.22-33
• /
• 2019

This paper introduces an efficient fingerprint matching method based on multiple reference minutiae points. First, we attempt to effectively align two fingerprints by employing multiple reference minutiae points. However, the corresponding minutiae points between two fingerprints are ambiguous since a minutia of one fingerprint can be a match to any minutia of the other fingerprint. Therefore, we introduce a novel method based on linear classification concept to establish minutiae correspondences between two fingerprints. Each minutiae correspondence represents a possible alignment. For each possible alignment, a matching score is computed using minutiae and ridge orientation features and the maximum score is then selected to represent the similarity of the two fingerprints. The proposed method is evaluated using fingerprint databases, FVC2002 and FVC2004. In addition, we compare our approach with two existing methods and find that our approach outperforms them in term of matching accuracy, especially in the case of non-linear distorted fingerprints. Furthermore, the experiments show that our method provides additional advantages in low quality fingerprint images such as inaccurate position, missing minutiae, and spurious extracted minutiae.

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.853-856
• /
• 2021

In this paper, a low noise amplifier having high gain and low noise by using input and inter stage matching circuits has been designed. A current-reused two-stage common-source topology is adopted, which can obtain high gain and low power consumption. Deterioration of noise characteristics according to the source inductive degeneration matching is compensated by adopting additional matching circuits. Moreover trade-offs among noise, gain, linearity, impedance matching, and power dissipation have been considered. In this design, 0.18-mm CMOS process is employed for the simulation. The simulated results show that the designed low noise amplifier can provide high power gain and low noise characteristics.

• 대한수학회보
• /
• 제37권1호
• /
• pp.121-125
• /
• 2000

In this paper, we obtain an algorithm for finding a maximum matching in the line graph L(G) of a graph G. The complexity of our algorithm is O($$\mid$E$\mid$$), where is the edge set of G($$\mid$E$\mid$$ is equal to the number of vertices in L(G)).

• 한국컴퓨터정보학회논문지
• /
• 제13권1호
• /
• pp.153-160
• /
• 2008

본 논문에서는 가중치 이분 그래프 정합을 이용하여 데이터 최대 흐름을 나타내었다. 가중치 이분 그래프 정합은 전송 데이터 객체를 에지들로 설정하고 서버와 클라이언트에 데이터의 최대 흐름 정합을 유도한다. 제안한 가중치 이분 그래프 정합을 이용하여 다자간 화상회의 시스템을 구현하였다. 서버에 최대한 데이터를 송신하고 클라이언트에서 최대한 수신함으로서 동영상 프레임의 끊김 현상과 병목현상이 개선되고 이미지가 깨지지 않는 우수한 성능을 나타내었다. 실험결과 기존의 흐름 제어 방법보다 악 2배의 성능을 나타내었다.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1343-1358
• /
• 2020

In the stagewise arithmetic orthogonal matching pursuit algorithm, the weak threshold used in sparsity estimation is determined via maximum iterations. Different maximum iterations correspond to different thresholds and affect the performance of the algorithm. To solve this problem, we propose an improved variable weak threshold based on the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the residual error value to control the weak threshold. When the residual value decreases, the threshold value continuously increases, so that the atoms contained in the atomic set are closer to the real sparsity value, making it possible to improve the reconstruction accuracy. In addition, we improved the generalized Jaccard coefficient in order to replace the inner product method that is used in the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the covariance to replace the joint expectation for two variables based on the generalized Jaccard coefficient. The improved generalized Jaccard coefficient can be used to generate a more accurate calculation of the correlation between the measurement matrixes. In addition, the residual is more accurate, which can reduce the possibility of selecting the wrong atoms. We demonstrate using simulations that the proposed algorithm produces a better reconstruction result in the reconstruction of a one-dimensional signal and two-dimensional image signal.

• 대한전기학회논문지
• /
• 제35권12호
• /
• pp.560-566
• /
• 1986

In the design of an RF discharge system, the electrical equivalence of the gas discharge must be known. With this knowledge, one can design a suitable matching network for a maximum power transfer from the RF generator into the discharge. For this purpose, an experiment has been conducted in which the electrical impedance (conductance and capacitance) was determined as a function of power. In parallel with this, a detailed theoretical analysis has been done and the results are in accord with those of our experiment. Design equations are also given for a simple matching network, and a design example is presented to demonstrate its application. During the actual operation of an RF discharge system, however, it has been often observed that the reflected power tends to vary in small values due to the changes in the impedance of the system. This problem can be relieved by adding an automatic impedance matching circuit to the system and this paper presents such an automatic impedance matching network.

• International journal of advanced smart convergence
• /
• 제1권2호
• /
• pp.16-19
• /
• 2012

A modified 4-coil magnetic resonance wireless power transfer (MRWPT) system is proposed. Four coils based on 2-coil system with additional two matching coils were used in this topology. When Tx-Rx distance is changed, the input impedance is changed. However, it can be adjusted by coil parameters of matching coils to maintain impedance matching for maximum efficiency. The equivalent circuit of MRWPT system was analyzed for both transmission function and optimum coupling coefficient of the matching coils. By using four spiral resonant coils, these design considerations was experimentally verified. The measured data agreed well with the calculated data and the transmission function of the proposed system was more efficient than that of conventional 2-coil system.

• 한국전자파학회논문지
• /
• 제24권2호
• /
• pp.168-179
• /
• 2013

4-코일 자기 공진 무선 전력 전송 시스템의 해석법 중 critical point analysis(CA)와 impedance matching analysis(IA)를 분석하고, 두 결과를 비교하였다. 4-코일 시스템은 가까운 거리에서는 주파수 분리 현상이 나타나고, 먼 거리에서는 효율이 급격히 감소하는 특징을 나타낸다. 따라서 고정된 주파수에서 사용할 경우, 목표하는 거리와 효율에 따라 최적화가 필요하다. CA는 전체 거리에서 효율이 최대가 되는 critical point를 이용하여 최적화하는 방법이고, IA는 목표 지점에서 임피던스 정합을 이뤄 최대 효율을 만족시키는 방법이다. 기존의 해석은 두 가지 방법을 비교하고 시스템 특성을 이해하는데 부족한 점이 있었기 때문에, 본 논문에서 두 방법의 이론을 좀 더 자세히 분석하고 비교하였다. 두 방법의 비교 결과를 통해 IA가 더 우수함을 보였다. 또한, 한쪽만 정합할 경우 발생되는 트레이드-오프에 대해서도 설명하였다. 스파이럴 공진 코일을 이용한 실험에서는 이론 결과와 동일한 결과를 얻을 수 있었다.