• 제목/요약/키워드: Maximum Heat Release Rate

검색결과 128건 처리시간 0.03초

밀폐된 구획실의 체적변화가 최대 열발생률에 미치는 영향에 관한 수치해석 연구 (A Numerical Study on the Effect of Volume Change in a Closed Compartment on Maximum Heat Release Rate)

  • 윤홍석;남동군;황철홍
    • 한국화재소방학회논문지
    • /
    • 제31권5호
    • /
    • pp.19-27
    • /
    • 2017
  • 밀폐된 구획실 화재에서 화원의 면적 및 위치, 화재성장률, 구획 체적의 변화가 열발생률을 포함한 주요 화재특성에 미치는 영향이 검토되었다. 이를 위해 닫힌 개구부가 적용된 ISO 9705 화재실을 대상으로 Fire Dynamics Simulator (FDS)를 활용한 화재시뮬레이션이 수행되었다. 주요 결론으로서, 화원의 면적 및 위치의 변화는 최대 열발생률, 총 열량, 상층부의 최대 온도 및 화학종 농도를 포함한 구획 내의 열적 특성과 화학적 특성에 큰 영향을 주지 않음을 확인하였다. 그러나 화재성장률과 구획 체적의 증가는 최대 열발생률 및 총 열량의 증가를 가져오며, 한계산소농도의 감소 및 최대 CO 농도의 증가를 발생시킨다. 마지막으로 화재성장률과 구획 체적의 함수로 표현된 최대 열발생률의 상관식을 도출하여, 밀폐된 구획실 화재에 대한 화재성장곡선의 적용을 위한 방법론이 제안되었다.

CNG 직접분사식 연소기에서의 열량해석(1) :균질급기 (Analysis of Heat Quantity in CNG Direct Injection Bomb(1) : Homogeneous Charge)

  • 최승환;전충환;장영준
    • 한국자동차공학회논문집
    • /
    • 제12권2호
    • /
    • pp.17-23
    • /
    • 2004
  • A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyze the heat quantity of homogeneous charge methane-air mixture under various initial pressures, excess air ratios and ignition times. As the overall pressure increase, the values of maximum combustion pressure, maximum heat release rate and cumulative heat release have been increased. But it is not very meaningful to compare with some values such as maximum combustion pressure, maximum heat release rate and cumulative heat release for different overall pressure due to the different heat energy of supplied fuel. So the each value is needed to be compared with normalized value, which is divided by the entered fuel energy. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. As the overall pressure increase, the CHR ratios and the UHC ratios have been decreased, while the HL ratios have been increased. The CHR ratio of 300 ms has the higher value than that of 10000ms, and the HL ratios of 300 ms have a lower value.

건축물 구획공간에 따른 화재성상 및 열방출율 측정에 관한 실험적 연구 - 실물규모 침대 매트리스 화재시험 중심으로 - (Experimental Study on the Measurement of Fire Behavior and Heat Release Rate in Building Compartment Space - Focus on Full Scale Fire Test of the Bed Mattress -)

  • 서보열;장우빈;박계원;홍원화
    • 한국화재소방학회논문지
    • /
    • 제32권6호
    • /
    • pp.28-33
    • /
    • 2018
  • 건축물 구획공간에 따른 화재성상 및 열방출율을 측정하기 위하여 실물규모 침대 매트리스의 표준화재시험방법(KS F ISO 12949 : 2011)으로 화재시험을 수행하였다. 개방형공간과 구획공간 모두 버너착화 후 초기 약 3분까지는 유사한 화재성장의 경향을 보이는 것으로 확인되었다. 3분후 구획공간에서의 열방출율이 개방형 공간보다 증가되어 높은 것으로 확인되었다. 침대 매트리스(SS)의 경우, 개방형 공간에서의 최대열방출율은 735 kW이며, 구획공간에서의 최대열방출율은 992 kW 로 측정되었다. 침대 매트리스(Q)의 경우 3분후 구획공간에서의 열방출율이 개방형 공간보다 급격하게 증가되는 것으로 확인되었다. 개방형 공간에서의 최대열방출율은 1,087 kW, 이 때의 측정시간은 346s 이며, 구획공간에서의 최대열방출율은 2,127 kW, 이때의 측정시간은 287 s 측정되어 구획공간에 따른 최대열방출율 및 측정시간의 차이가 확인되었다.

퍼니쳐 칼로리미터를 이용한 화재 특성 평가 (Fire Characteristics Evaluation by Using Furniture Calorimeter)

  • 권오상;유용호;김흥열
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
    • /
    • pp.44-47
    • /
    • 2008
  • This paper evaluated the fire characteristics by using furniture calorimeter. Fire property assessment using the furniture calorimeter showed that the heat release rate is maximum 1,600 kW, maximum CO is 0.261%, maximum CO2 is 2.597%, while for the sofa for one person, the maximum heat release rate is approx. 531.5 kW, max. CO is 0.102%, and max. CO2 is 1.011%.

  • PDF

단일 영역 모델 열발생율 계산 방법의 개선에 관한 연구 (A Study on the Calculation of Heat Release Rate to Compensate the Error due to Single Zone Assumption in Diesel Engines)

  • 김기두;윤욱현;하지수;류승협
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권7호
    • /
    • pp.1063-1071
    • /
    • 2004
  • Accurate heat release analysis of cylinder pressure data is important for evaluating performance in the development of diesel engine However, traditional single zone first law heat release model(SZM) has significant limitations due to the simplified assumption of uniform charge and neglecting local temperature inside cylinder during combustion process. In this study. heat release rate based on single zone heat release model has been evaluated by comparison with computational analysis results using Fire code which is based on multi-dimensional model(MDM). To overcome limitations due to simplicity of single zone assumption. especially the influence of specific heat ratio on gross heat release has been esteemed and newly suggested were the equation $\gamma$= $\gamma$(${T/T}_{max}$) which describes the variations of gases thermodynamic properties with mean temperature and maximum mean temperature inside cylinder Single zone heat release model applied with this equation is shown to give very good results over whole range of operating conditions when compared with computational analysis results based on multi-dimensional model.

디젤기관에 있어서 에멀젼연료 연소특성에 미치는 영향 (Effects of Emulsified Fuel on Combustion Characteristics in a Diesel Engine)

  • 임재근;조상곤;황상진;유동훈
    • 동력기계공학회지
    • /
    • 제11권1호
    • /
    • pp.51-55
    • /
    • 2007
  • A study on combustion characteristics using emulsified fuel in a diesel engine were performed experimentally. In this paper, the experiments were performed at engine speed 1800rpm, emulsion ratios were 0%, 10%, 20%, and main measured items were specific fuel consumption, cylinder pressure, rate of pressure rise, rate of heat release etc. The obtained conclusions were as follows. 1) Specific fuel consumption increased maximum by 19.8% at low load, but was not affected at full load. 2) Rate of pressure rise and rate of heat release were about the same in the case of 10% and 20% of emulsion ratio. 3) Cylinder Pressure increased 9.6%, rate of pressure rise increased 53.4% in case of emulsion ratio 20% at full load. 4) Rate of heat release increased 72.4% in case of emulsion ratio 20% at full load.

  • PDF

복사열 증가에 따른 소나무 생엽의 열적특성 분석 (Thermal Characteristics of Living Leaves in Pinus Densiflora with Heat Flux)

  • 박영주;이해평
    • 한국방재학회 논문집
    • /
    • 제10권5호
    • /
    • pp.75-82
    • /
    • 2010
  • 본 연구에서는 화재강도에 따른 산림연료의 연소특성을 고찰하기 위하여 산불에 가장 취약한 소나무 생엽을 대상으로 복사열을 변수(25 kW/$m^2$, 50 kW/$m^2$, 75 kW/$m^2$)로 하여 연소특성 실험을 수행하였다. 콘칼로리미터 장비를 이용하여 착화특성, 발열 특성, 발연량 및 CO, $CO_2$ 방출특성, 중량감소특성 등을 분석하였다. 60.66% 수분을 함유한 소나무 생엽은 25 kW/$m^2$, 50 kW/$m^2$, 75 kW/$m^2$ 복사열에서 착화가 일어나지 않았으며, 복사열 크기가 클수록 발열량과 열방출율은 2배 빠른 시간에 급격하게 최대값에 도달하고 최대값은 2배 정도 높은 것으로 나타났다. 발연량은 복사열 크기가 작을수록 불완전 연소로 인한 연기방출량은 많은 것으로 나타났다. CO 및 $CO_2$ 방출량은 복사열이 증가할수록 최대값이 급격히 높고, 빠른 시간에 최대값에 도달하는 것으로 나타나 복사열이 증가할수록 탄소산화물은 많은 것으로 나타나 산불발생 시 대형산불의 경우 많은 양의 CO와 $CO_2$를 방출할 것으로 사료된다.

트레이용 난연 전력 케이블의 화재특성에 관한 실험적 연구 (Experimental Study of Fire Characteristics of a Tray Flame Retardant Cable)

  • 김성찬;김정용;방경식
    • 한국안전학회지
    • /
    • 제28권3호
    • /
    • pp.39-43
    • /
    • 2013
  • The present study has been conducted to investigate the fire combustion properties and fire behavior of an IEEE-383 qualified flame retardant cable. The reference reaction rate and reference temperature which are commonly used in pyrolysis model of fire propagation process was obtained by the thermo-gravimetric analysis of the cable component materials. The mass fraction of FR-PVC sheath abruptly decreased near temperature range of $250{\sim}260^{\circ}C$ and its maximum reaction rate was about $2.58{\times}10^{-3}$[1/s]. For the XLPE insulation of the cable, the temperature causing maximum mass fraction change was ranged about $380{\sim}390^{\circ}C$ and it has reached to the maximum reaction rate of $5.10{\times}10^{-3}$[1/s]. The flame retardant cable was burned by a pilot flame meker buner and the burning behavior of the cable was observed during the fire test. Heat release rate of the flame retardant cable was measured by a laboratory scale oxygen consumption calorimeter and the mass loss rate of the cable was calculated by the measured cable mass during the burning test. The representative value of the effective heat of combustion was evaluated by the total released energy integrated by the measured heat release rate and burned mass. This study can contribute to study the electric cable fire and provide the pyrolysis properties for the computational modeling.

희박혼합기에 대한 다점점화의 점화능력 및 연소특성 (Ignitability and Combustion Characteristics of Lean Mixture by Multi-Point Ignition)

  • 이상준;나성오;이용균
    • 대한기계학회논문집
    • /
    • 제19권10호
    • /
    • pp.2607-2616
    • /
    • 1995
  • The influences of number of spark plug on ignitability, combustion characteristics and combustion promotion effect were examined to establish the design conception of spark ignition system for lean burn. Ignitability was increased remarkably by increasing of number of spark plug at combustion wall. Combustion duration was shortened and maximum combustion pressure was increased in accordance with increasing of spark plug number. Rate of overall combustion promotion considered of combustion duration and combustion pressure was 28% in two point ignition and 40% in four point ignition. It was verified that heat release, heat loss and combustion duration were affected by flame area, heat transfer area and maximum flame travel distance respectively.

대심도터널 화재 안전 설계를 위한 승용차의 열방출률 및 화재전파 특성에 관한 연구 (A study of the HRR and fire propagation phenomena for the fire safety design of deep road tunnel)

  • 유용호;권오상
    • 한국터널지하공간학회 논문집
    • /
    • 제12권4호
    • /
    • pp.321-328
    • /
    • 2010
  • 본 연구에서는 최근 국내 도심지 대심도 지하교통터널 계획과 함께 중요성이 대두되고 있는 터널내 화재 안전 설계에 가장 기본적인 설계 요소인 자동차의 열방출률을 제시하고자 실물화재실험을 실시하였다. 산소소모율법을 적용한 라지스케일칼로리미터를 이용하여 승합차의 열방출률을 측정하였으며, 또한 두 대의 승용차를 인접시켜 터널 정체시 화재 전파 특성을 파악 하였다. 그 결과 승합차의 최대 열방출률은 5.9 MW를 나타내었으며, 일산화탄소는 최대 482 ppm이 방출되었다. 두 대의 승용차의 화재 전파 특성 실험의 경우 화재 발생 후 약 3분 30초 경과부터 인접 승용차에 화재 전파가 시작되어, 15분 경과 후에는 완전한 화재로 발달하였다. 최대 발열량은 9 MW를 나타내었다. 이러한 실물화재실험에서 얻어낸 결과는 향후 수치해석시 중요한 입력 자료로 이용됨과 동시에 터널의 방재설비 설계에 유용하게 적용 될 수 있을 것이다.