• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.55-65
• /
• 2005

Extensible elastica solutions of two-dimensional deflection of crimped fiber cantilever of circular wavy crimp were obtained for one end clamped boundary under concentrated, inclined and dead tip load Fiber was also regarded as a linear elastic material. Crimp was described as a combination of semicircular arcs smoothly connected with each other having con­stant curvature of all the same magnitude and alternative sign. Also the inclined load direction was taken into account. The solutions were expressed as the recursive forms of integrals in two different cases, which can also be transformed to elliptic integrals respectively. Comparing the data with inextensible ones was carried out. Consequently in the solution, the normal strain of neutral axis is expressed in terms of cross-sectional area, second moment of area and normalized load parameter. Examples of the circular cross-sectioned fiber are presented. As a result, the differences of normalized load between inexten­sible and extensible elastica solutions when the radius ratio becomes 0.1 were maximum $\Lambda$ = 0.1.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.133-146
• /
• 1999

Mokpo coastal area is connected to the adjacent a long river and two large basins. It is essential for port planning coastal zone management and environmental impact study to analyze the data related to the ship operation and variation of current and water quality due to the development of water area including dredging reclamation and estuary barrage. The Yongsan river estuary weir and Yongam-Kumho basins discharge much of water through water gates for the purpose of flood control and prohibit salt intrusion at the inland fresh water area. To meet this purpose discharge through the gates have been done at the period of maximum water level difference between inner river and sea level. This discharged water may cause the changes of current pattern and other environmental influences in the vicinity and inner area of semi-closed Mokpo harbor. In this study ADI method is applied to the governing equation for the analysis of the changes on current pattern due to discharged water. As the results of this study it is known that the discharging operation causes many changes including the increase of current velocity at the front water area at piers approaching passage and anchorages. Discussion made on the point of problems such as restricted maneuverability and the safety of morred vessels at pier and anchorage. To minimize this influence the linked gate operation discharging warning system and laternative mooring system are recommended.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2007.11a
• /
• pp.193-198
• /
• 2007

KIER has been developing the anode supported flat tubular SOFC stack for the intermediate temperature $(700{\sim}800^{\circ}C)$ operation. for this purpose, we have first fabricated anode supported flat tubular cells by the optimization between the current collecting method and the induction brazing process. After that we designed the compact fuel & air manifold by adopting the simulation technique to uniformly supply fuel & air gas and the unique seal & insulation method to make the more compact stack. For making stack, the prepared anode-supported flat tubular cells with effective electrode area of $90cm^2$ of connected in series with 12 modules, in which one module consists of two cells connected in parallel. The performance of stack in 3 % humidified $H_2$ and air at $800^{\circ}C$ shows maximum power of 507 W. Through these experiments, we obtained basic & advanced technology of the anode-supported flat tubular cell and established the proprietary concept of the anode-supported flat tubular SOFC stack in KIER.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.620-634
• /
• 2018

The NTR(New Tubular Roof) method was used to secure the stability of the tunnel and minimize the subsidence of the road. The tunnel was constructed at about 7.5 meters deep below the highway. with a width of about 21 meters. Following the NTR method, 13 steel pipes with a diameter of 2.3 meters were digged and pushed in longitudinally along the tunnel profile and cut out sides of pipes to connect to adjacent pipes, then filled the inside of pipes and the connected space between pipes with concrete to complete the lining of the tunnel to be excavated. As the steel pipes were digged in sequentially, the area of relaxation was connected to each other and behaves like a gradually widening tunnel. When the steel pipes were digged in to the widest points of the tunnel, the settlement rate of the road surface was increasing to the maximum as 2.2 mm and the total settlement until the lining construction was approximately 7.7 mm. After that, by excavating a tunnel inside the pre-installed lining, an additional settlement of about 4.3 mm was occurred, resulting in the total settlement of about 11.8 mm after completing of tunnel construction.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.623-631
• /
• 2011

Metallic sandwich panels based on a truss core structure have been developed for a wide range of potential applications with their lightweight and multi-functionality. Structural performance of sandwich panels can be predicted from the studies on mechanical behavior of a unit cell of truss core structures. Analytical investigations on the unit cell provide approximated guidelines for the design of overall core structures for a specific application in short time. In this study, the effects of geometrical parameters on mechanical behavior of a pyramidal shape of unit cell were investigated with analytical models. The unit cell with truss member angle of 45 degree was considered as reference model and other models were designed to have the same weight and projected area but different truss member angle. All truss members were assumed to be connected with pin joint in analytical models. Under the assumptions, the equivalent strength and stiffness of the unit cell under compressive and shear loads were predicted and compared. And finally, the optimum core member angle to have maximum mechanical property could be calculated and verified with FE analysis results.

• International journal of advanced smart convergence
• /
• v.10 no.1
• /
• pp.151-158
• /
• 2021

The main cause of ulcer is pressure, which starts to develop when the critical body pressure (32mmHg) is exceeded, and when the critical time elapses, ulcer occurs. In this study, the keyboard mechanism of the medical bed with 4 bar links was adopted, and each key can be controlled vertically. A key has one servo drive and one sensor controller which hasseveral body pressure sensors. The sensor controllers and the servo drives are connected to the main controller by two CAN (Car Are Network) in series, respectively. By reading the maximum body pressure value of each keyboard sensor, and by calculating the error value based on the critical body pressure, the fuzzy controller moves each key so that the total error becomes zero. If the fuzzy controller fails, then it prevents ulcer by lifting and lowering the keys of the bed alternatively within a short time. Thus, the controller operates in two-stage. The validity and effectiveness of the proposed approach have been verified through experiments.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.611-616
• /
• 2013

This paper studies relationship between typhoon and El Ni$\tilde{n}$o La Ni$\tilde{n}$a events by using 25 years meteorological data of KMA and JMA. The results are listed below. Annual mean number of typhoon's occurrence in El Ni$\tilde{n}$o event year is 23.9, and that in La Ni$\tilde{n}$a event year is 24.9. The number of typhoon's occurrence decreases in El Ni$\tilde{n}$o event year. Mean central minimum pressure and mean maximum wind speed in El Ni$\tilde{n}$o event year are 959.3hPa and 35.8m/s, and those in La Ni$\tilde{n}$a event year are 965.5hPa and 33.7m/s respectively. Intension of typhoon is stronger in El Ni$\tilde{n}$o event year than La Ni$\tilde{n}$a event year. To be more specific mean central minimum pressure is lower 6.2hPa and mean maximum wind speed is stronger 2.1m/s. This result is closely connected with sea area of typhoon's occurrence. Typhoons in El Ni$\tilde{n}$o event year are more likely to occur in east of 150E and south of 10N, but those in La Ni$\tilde{n}$a event year are more likely to occur in 120-150E and north of 20N. Typhoons which occur in east of 150E and south of 10N can be stronger because the typhoons move in broad sea area of high sea surface temperature in western North Pacific.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.65-67
• /
• 2018

We introduce a system that detects smoking in a specific area. The proposed system is implemented on a wireless ad hoc network consisting of Raspberry Pi boards. It is more economical owing to low-cost device than commercial smoking monitoring system and is scalable than the existing system with single Raspberry Pi. In this paper, the probability density function of carbon monoxide concentration during smoking and non-smoking is approximated as Gauusian distribution, respectively, using data measured from sensors for a long time. Based on this, a maximum likelihood detection technique is adopted to estimate the smoking status by observing the concentration of carbon monoxide. We aim at improving the reliability by estimating the smoking status using the collected values from multiple sensors connected to the ad hoc network.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.743-746
• /
• 2008

Recently, due to the effect of global warming and extreme rainfall, the magnitude of flood disaster and the frequency of flood is rapidly increasing. In order to mitigate the damage of human and property from this kind of meteorological phenomenon and manage water resources scientifically, effective operation of dam and reservoir is very important. In case of Andong dam which was not performed a flood control function needs to develop new types of dam safety management measure because of recent extraordinary flood by typhoons. In case of Andong dam and Imha dam, I am using HEC-5 model in order to apply reservoir simulation. In this case, complex conditions among 100-year floods , 200-year floods and PMF was used. Also, I modified the maximum outflow 3,800m3/s into 3,490m3/s and applied this modified discharge in order to secure freeboard in the downstream. In an analysis that I applied modified outflow by 100-year floods and 200-year floods to, the result showed that river didn't overflow in Andong area but some other places have relatively low freeboard. In the cases that I modified maximum outflow, results showed that freeboard of levee is larger than existed simulation. In the simulation that I applied 200-year floods and PMF to and under a condition connected with PMF, results showed overflowing the levees. Because of the difference between the frequency of dam outflow and the design flood in river, it is required to improve the existed flood plan in the downstream of Andong dam. As a result of this study, the optimal operation of reservoir systems can be proposed to mitigate the flood damage in the downstream of Andong dam and also can be used to establish the flood plans.

• Journal of International Academy of Physical Therapy Research
• /
• v.12 no.1
• /
• pp.2279-2285
• /
• 2021

Background: The spinal nerves, which start at the lumbar level, are connected to the nerve innervation in the knees. Currently, there is a lack of research on the treatment of knee pain through lumbar mobilization. Objectives: To investigate the effects of lumbar joint mobilization (LJM) and transcutaneous electronic nerve stimulation (TENS) on proprioception and muscular strength in volleyball players with chronic knee pain. Design: Two group pre-posttest. Methods: A total of 26 professional volleyball players with chronic knee pain were allocated to the LJM (n=13) and TENS (n=13) groups. In the LJM group, grade III - IV amplitude was applied 3 times for 1 minute (80 times per minute) at the affected lumbar (L2-3) facet joint in the prone position. In the TENS group, the TENS treatment device was used to directly apply or 15 minutes to the area of chronic knee pain (100 Hz, 150 ㎲). Proprioception was measured by knee flexion and extension angles, and muscle strength was evaluated using an isokinetic test. Measurements were taken before and after interventions. Results: In the eye opened conditiond, proprioception significantly increased during both knee extension and flexion after LJM, while only knee extension was significantly increased in the TENS group. There was also a significant difference in knee extension between the two groups. In the eye close conditiond, proprioception was significantly improved only during knee extension in the LJM group, and the difference in knee extension between the groups was also significant (P<.05). The maximum torque of the affected knee joint was significantly improved at 60°/sec in both groups (P<.05); however, there was no difference between the two groups. There was no significant difference in the maximum flexion torque within or between the groups. Conclusion: This study suggests that LJM improved proprioception and muscular strength in volleyball players with chronic knee pain.