• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.34-39
• /
• 2010

Objective: The aim of the present study was to evaluate the changes in tooth mobility following orthodontic treatment and to obtain information regarding the guideline of retainer wear duration during the post-treatment period. Methods: The sample consisted of twenty patients who had been treated with edgewise appliances. The mobility of the maxillary teeth from the central incisor to the first molar was measured bilaterally by way of the $Periotest^{(R)}$, a non-invasive, electronic device that provides an objective measurement of the reaction of the periodontium to a defined impact load. Tooth mobility was monitored at the time of the removal of the orthodontic appliances and subsequently at three-month intervals during the two years following appliance removal. Results: Tooth mobility decreased rapidly for the first six months and then decreased at a slower rate during the next six months; no statistically significant decrease in mobility was observed during the second year following appliance removal. Conclusions: The results of the present study suggest that adequate tooth stabilization is critical during the first six months following appliance removal and that continued wearing of retainers is recommended at least until twelve months after the completion of orthodontic treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.431-443
• /
• 2007

Statement of problem: Injuries along with discomfort may result on the oral mucosa when non-rigid material is used as the major connector in construction of RPD, since nonrigid major connectors transmit unstable forces throughout the appliance. Titanium which recently draws attention as a substitute of Co-Cr had a difficulty in fabricating due to high melting temperature but the development of casting technique makes it possible to apply to the clinical case. Purpose: The purpose of this study was to investigate the rigidity and the castability of titanium upper major connector by design and make a comparison with Co-Cr major connectors which are widely used in clinical cases now. Material and methods: Casting was done using CP-Ti(Grage 2) (Kobe still Co., Japan) for the experimental groups, and 4 various designs namely palatal strap, U-shaped bar, A-P strap, and complete palatal plate were casted and 5 of each designs were included in each group. For the experimental group, Universal testing machine (Model 4502; Instron, Canton, Mass) was used to apply vertical torsional force vertically to the horizontal plane of major connector. In the second experiment, Vertical compressive force was applied to the horizontal plane of major connector. As a comparative group, Co-Cr major connector was equally manufactured and underwent the same experimental procedures Strain rate was measured after constant loading for one minute duration, and statistical analysis was done with SPSS ver.10.0 for WIN(SPSS. Inc. USA). From the one-way ANOVA and variance analysis (P=0.05), Scheffe's multiple comparison test implemented. Results: 1. Least amount of strain was observed with complete palatal plate followed by A-P bar, palatal bar, and the U-shaped bar having most amount of strain. 2. In all designs of titanium major connector, less strain rate was observed under compressive loading than under torsional loading showing more resistance to lateral force. 3. For titanium major connector, less strain rate was observed when the force is applied to the first premolar area rather than to the second molar area indicating more strength with shorter length of lever. 4. In Comparison of Co-Cr major connector with titanium major connector, palatal strap and U-shaped bar designs showed higher strength under torsional force that is statically significant, and under compressive force, no significant difference was observed expert for U-shaped bar. 5. In titanium major connector, complete palatal plate showed lowest success rate in casting when compared with the Co-Cr major connector. Conclusion: Above results prove that when using titanium for major connector, only with designs capable of generating rigidity can the major connector have almost equal amount of rigidity as Co-Cr major connector and show lower success rate in casting when compared with the Co-Cr major connector.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.18-25
• /
• 2005

Traumatic bone cyst is a nonodontogenic cyst without epithelial-linig which contains fluid in it's cavity, and it is limited by bone walls with no evidence of infection. Traumatic bone cyst is asymptomatic and appears more frequently in the second decade. Gender distribution is approximately equal, although males are affected slightly often than females. Radiographically the lesion shows a well demarcated radiolucent lesion of variable size and the lesion may have scalloped margins. The adjacent teeth to traumatic bone cyst remains vital. Traumatic bone cyst is usually treated by surgical exploration and currettage of the lesion. In the first case of this case report, the patient was refered from the local dental clinic for the radiolucent area under the left mandibular first molar. From the panorama radiograph at the first visit, the radiolucent area of the left mandible showed a well defined scalloped margin and identified as traumatic bone cyst. In the second case, the patient have visited for the chief complaint of swelling and abcess of right maxillary second premolar. In the radiographic check up with panorama radiograph, the radiolucent lesion with well demarcated scalloped margin was found in the right mandible body, and identified as traumatic bone cyst. In the first case, overinstrumentation was done through the mesial root canal to irrigate the lesion. In the second case, not any treatment was done, and watched the progression of the lesion. And in both cases, after two month, the radiolucency and the size of the lesion has decreased to show healing in progress.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.658-665
• /
• 2007

Oligodontia is defined as the congenital absence of six or more teeth in dentition, excluding the third molars. The prevalence of congenital missing teeth is about 1.6 to 9.6% of population and the prevalence of oligidontia is about 0.08 to 1.1%. The mandibular second premolar is the most frequently absent after the third molar, followed by the maxillary lateral incisor and upper second premolar. Females seem to be affected slightly more than males. Oligodontia may occur either in isolation, or as a part of a syndrome such as ectodermal dysplasia. Different causes are possible for oligodontia: physical obstruction or distruction of the dental lamina, space limitation, functional abnormalities of the dental epithelium, failure of induction of the underlying mesenchyme, chemotherapy, radiotherapy or genetic factor. Because oligodontia would result in esthetic and functional problems, such as facial asymmetry or occlusal disharmony, early diagnosis from clinical and radiographic examination was necessary. And appropriate treatment plan should be followed. This case report was about oral conditions and treatment of the oligodontia patients who have no specific systemic disease.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.2
• /
• pp.217-232
• /
• 2000

The author studied on the 128 cases of benign odontogenic tumors which had been diagnosed with biopsy during the period of Jan. 1989 to Dec. 1998 at the Kyungpook National University Hospital, Yeungnam University Medical Center, Keimyung University Dongsan Medical Center, and Taegu Catholic Medical Center. This study contained the clinicostatistical analysis of the frequency in relation to sex, age, locations, chief complaints, duration, radiographic findings, recurrence, teeth, and treatment methods. The results were as follow : 1. Of a total of 128 benign odontogenic tumors, ameloblastomas(57 cases; 44.5%) and odontomas (44 cases ; 34.4%) mostly occupied. The other types of lesions were 8 calcifying odontogenic cysts, 7 benign cementoblastomas, 4 myxomas, 3 adenomatoid odontogenic tumors, 2 calcifying epithelial odontogenic tumors, 2 ameloblastic fibro-odontomas, and 1 odontogenic fibroma. 2. In age and sex distribution, benign odontogenic tumors occured slightly more often in males(53.9%) than females(46.1%) and the majority of cases(79.7%) were found during 2nd, 3rd, and 4th decade. 3. There was a predilection for mandibular lesions(mandible-maxilla ratio, 2.6 : 1). 4. The most common chief complaint was swelling(29.7%) and in respect to duration, the cases less than 1 year(50.0%) mainly appeared. 5. There were 7 cases(13.0%) of recurrence on ameloblastoma and there was no recurrence in the others. 6. In Ameloblastoma It commonly occured during 3rd and 4th decade(59.6%) and mean age was 30.2 years. The majority of cases were occurred in mandible(96.5%) , especially mandibular molar and angle area(71.9%). The most common chief complaint was swelling(47.4%) and in respect to duration, the cases less than 1 year(52.6%) mainly appeared. In relation to teeth, there were resorption of root(52.6%), displacement of teeth(31.6%), and in relation to impacted teeth(43.9%). There was higher recurrence rate in the cases by conservative treatment(14.7%) than radical treatment(10.0%). As regards radiographic findings, conservative treatments were prevalent in the cases of unilocular type(85.7%) as compared with multilocular type(48.5%). and there was higherrecurrence rate in the cases of multilocular type(18.2%) than unilocular type(4.8%). As regards the type of treatment in relation to age, conservative treatments were prevalent in patients younger than 20 years of age. 7. In Odontomas It commonly occured during 2nd decade(50.0%) and in maxillary anterior teeth(40.9%). The most common chief complaint was delayed retention and permanent impaction of teeth(72.7%), and most frequently associated with impacted teeth(79.5%).

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.343-351
• /
• 1998

The purpose of this study was to investigate the pretreatment and posttreatment dentofacial characteristics of non-extraction patients with Class I malocclusion. And to compare this result with matched non-orthodontic normal occlusion and Class I premolar extraction patients. Such comparison might help identify morphologic characteristics of the non-extraction patients. Initial and final cephalometric evaluation were compared in a sample of 22 patients with Class I malocclusions treated in non-extraction manner with edgewise appliance and MEAW The mean age of the total population was 14 years 9 months and the average treatment time was 2 years 8 months. 32 landmarks were located and digitized on each cephalogram. From these landmarks, 24 linear and angular dimension were obtained. Student's t-test were used to compare the pretreatment - posttreatment results, Nonextraction - Normal groups, and nonextraction Extraction groups. Significance was predetermined at $p{\leq}0.05$. The results were as follows. 1. Before treatment, the mean value of the $ODI\;was\;69.9^{\circ},\;APDI\;was\;82.1^{\circ},\;CF\;was\;152^{\circ},\;EI\;was\;152^{\circ}$ in the non-extraction groups. 2. The skeletal pattern of the non-extraction groups were similar with non-orthodontic normal groupsr, but the non-extraction groups had larger interincisal angle. 3. Comparison between groups treated with and without extraction indicated at pretreatment, the extraction groups had more protrusive lips, smaller interincisal angle, and EI. 4. After treatment, there was no significant changes in the skeletal pattern of the non-extraction groups, but uprighting of the maxillary and mandibular first molar and decrease of the interincisal angle were seen.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.6
• /
• pp.643-647
• /
• 2007

Purpose: The purpose of study was to investigate the correlationship between lip canting change and occlusal canting change after bimaxillary orthognathic surgery, and the ratio of lip canting change and occlusal canting change after the surgery. Patients and methods: The subjects for this study was obtained from a group of 25 patients who took bimaxillary orthognathic surgery for occlusal canting correction at the Department of the Oral and Maxillofacial Surgery, Samsung Medical Center in Seoul, Korea between January 2000 and December 2005 and a patient's chart had to contain a resting frontal facial photograph in natural head position and a corresponding PA cephalogram in occlusion on the same day before the surgery and post-op 6 months later. The lip canting change was assessed with the angle each labial commissure and the bipupilary reference line. And, the occlusal caning change in the frontal plane was assessed with the angle between the each maxillary first molar occulasal surface and the bi-frontozygomatic suture reference line. Results: In angular measurement, average occlusal canting change was $3.09^{\circ}$ and standard deviation was $1.05^{\circ}$, average lip canting change was $1.56^{\circ}$ and standard deviation was $1.05^{\circ}$. In linear measurement, average occlusal canting change was 2.41mm and standard deviation was 2.75mm, average lip canting change was 1.18mm and standard deviation was 0.43mm. Lip canting correction ration to occlusal canting correction was 51.5(${\pm}8.4$)% in angular measurement and 48.8(${\pm}9.1$)% in linear measurement. Under Pearson's correlation analysis, Pearson's correlation coefficient was 0.869 in angular measurement and 0.887 in linear measurement(p-value < 0.01). High correlationship was shown between occlusal canting change and lip canting change. Conclusion: First, Bimaxillary orthognathic surgery can correct lip canting as well as occlusal canting. Second, The average amount of lip canting correction is $51.5{\pm}8.4%,\;48.8{\pm}9.1%$ of occlusal canting correction in the study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.399-417
• /
• 2008

The aim of this study was to investigate the relationships between bite force, masseter muscle and craniofacial morphology. 141 individuals were included. Bite forces were measured with a bite force transducer(SKT 2004). The facial morphology of the samples was evaluated on the Lateral and PA cephalometric radiographs(Asahi CX-90 SP). Ultrasonographic images were obtained for 36 individuals(Logiq 500). General status of the subjects were also measured for investigating possible relationships. Their relationships were analyzed by means of t-test, Pearson's correlation coefficients and simple regression analysis. In conclusion, bite force of molar was significantly correlated with craniofacial morphology for males and females, but not to masseter muscles. The masseter muscle for males had a significant correlation with craniofacial morphology. The unexpected negative correlations between size of masseter muscle and maxillary width was revealed for males. One possible way to arrive at a plausible explanation for the correlation between masster muscle, bite force and craniofacial morphology of males were the deep layer of masseter muscle had a great influence on males and the superficial layer of masseter muscle had a great influence on females.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.244-251
• /
• 2017

PURPOSE. The purpose of this study was to determine fracture resistance and failure modes of three-unit fixed dental prostheses (FDPs) made of lithium disilicate pressed on zirconia (LZ), monolithic lithium disilicate (ML), and monolithic zirconia (MZ). MATERIALS AND METHODS. Co-Cr alloy three-unit metal FDPs model with maxillary first premolar and first molar abutments was fabricated. Three different FDPs groups, LZ, ML, and MZ, were prepared (n = 5 per group). The three-unit FDPs designs were identical for all specimens and cemented with resin cement on the prepared metal model. The region of pontic in FDPs was given 50,000 times of cyclic preloading at 2 Hz via dental chewing simulator and received a static load until fracture with universal testing machine fixed at $10^{\circ}$. The fracture resistance and mode of failure were recorded. Statistical analyses were performed using the Kruskal-Wallis test and Mann-Whitney U test with Bonferroni's correction (${\alpha}=0.05/3=0.017$). RESULTS. A significant difference in fracture resistance was found between LZ ($4943.87{\pm}1243.70N$) and ML ($2872.61{\pm}658.78N$) groups, as well as between ML and MZ ($4948.02{\pm}974.51N$) groups (P<.05), but no significant difference was found between LZ and MZ groups (P>.05). With regard to fracture pattern, there were three cases of veneer chipping and two interfacial fractures in LZ group, and complete fracture was observed in all the specimens of ML and MZ groups. CONCLUSION. Compared to monolithic lithium disilicate FDPs, monolithic zirconia FDPs and lithium disilicate glass ceramics pressed on zirconia-based FDPs showed superior fracture resistance while they manifested comparable fracture resistances.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.355-362
• /
• 2001

Data derived from odontometric studies are useful in many areas. Especially crown diameter of primary teeth is important in not only anthropology but also clinical dentistry. The purposes of this study were to compare diameters of primary molars of Korean children with those of preformed stainless steel crown, and examine racial characteristics of primary molars of Korean children. The mesiodistal and buccolingual diameters of primary molars were measured on dental casts taken from 235 children(male 105, female 131), with digital calipers. And the data were compared with those of preformed stainless steel crowns. The results were as follows; 1. No significant difference was observed between the right and left members of antimeric teeth and all primary molars of male were larger than those of female. 2. The diameters of primary molars of Korean are smaller than those of Austrailian aborigines and there was significant difference between diameters of primary molars of Korean and those of other populations. 3. There were size differences between diameters of maxillary, mandibular first molar and preformed stainless steel crown than other primary molars, relatively.