• The Journal of the Korean dental association
• /
• v.48 no.1
• /
• pp.45-55
• /
• 2010

Purpose: The aim of this study was to evaluate 1 year cumulative survival rate of implants placed on augmented sinus using Osteon$^{(R)}$, bone graft material and to assess height of the grafted material radiographically. Material and Methods: 10 maxillary sinuses were augmented in 10 patients and 25 implant fixtures were installed simultaneously or after 6 months healing period. The height of the sinus graft material was measured using panoramic images immediately after augmentation and up to 19 months subsequently. Changes in the height of the sinus graft material were calculated with respect to implant length and original sinus wall height. Results: The cumulative survival rate was 100% in all 25 implants. Additionally, normal healing process without any complication was observed in all patients. The mean crown/Implant ratio was 1.25. The mean marginal bone loss was 0.95mm and the mean resorption rate of Osteon$^{(R)}$ was 0.05mm/month. The fastest resorption site of Osteon$^{(R)}$ is the first molar area. The grafted material was well maintained in sinus and decreased slightly over 1 year. Conclusion: In conclusion, It can be suggested that Osteon$^{(R)}$ may have predictable result when it was used as a grafting material for sinus floor augmentation.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.51-59
• /
• 2002

The aim of the present study was to investigate the distribution of periodontally hopeless teeth in patients who had not been treated. Five hundred nineteen teeth of 163 patients who had visited at the Department of Periodontology, Chonbuk National University Hospital during the period from January 1999 to July 2001 were selected as a periodontally hopeless tooth. Selection criteria were as follows: 1) probing pocket depth more than 8mm, 2) tooth mobility of degree III, 3) radiographic bone loss more than 75%. The contralateral tooth to a hopeless tooth (experimental tooth) was designated as a control tooth. Between the experimental and control tooth, differences in probing pocket depth, tooth mobility and amount of radiographic bone loss were examined as well as correlation. The results showed that hopeless teeth were most frequently found in the maxillary first molar position and least frequently in the maxillary canine position. Differences between experimental and control teeth were 2mm in probing depth, 1 degree in tooth mobility, and 20% in amount of bone loss (p<0.01). The periodontal conditions between the experimental and control teeth showed correlation in general, however, statistical significances were found in posterior teeth positions. Within limitations of this study, it can be concluded that local factors may play a role in deterioration of periodontal disease along with symmetrical character of periodontal disease.

• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.393-403
• /
• 2019

Objective: Sliding mechanics using orthodontic miniscrews is widely used to stabilize the anchorage during extraction space closure. However, previous studies have reported that both posterior segment displacement and anterior segment displacement are possible, depending on the mechanical properties of the archwire. The present study aimed to investigate the effect of archwire stiffness and friction change on the displacement pattern of the maxillary posterior segment during anterior segment retraction with orthodontic miniscrews in sliding mechanics. Methods: A three-dimensional finite element model was constructed. The retraction point was set at the archwire level between the lateral incisor and canine, and the orthodontic miniscrew was located at a height of 8 mm from the archwire between the second premolar and first molar. Archwire stiffness was simulated with rectangular stainless steel wires and a rigid body was used as a control. Various friction levels were set for the surface contact model. Displacement patterns for the posterior and anterior segments were compared between the conditions. Results: Both the anterior and posterior segments exhibited backward rotation, regardless of archwire stiffness or friction. Among the conditions tested in this study, the least undesirable rotation was found with low archwire stiffness and low friction. Conclusions: Posterior segment displacement may be unavoidable but reducing the stiffness and friction of the main archwire may minimize unwanted rotations during extraction space closure.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.531-556
• /
• 1992

The majority of the commonly used protraction headgears for the protraction of small and/or retropositioned maxilla not allow a change in the point of force application or direction of the force delivery to attain predictable results because of the position of the upper and lower lips to avoid discomfort to the patient. The purpose of this study was to investigate the initial reaction of maxillofacial complex according to the change of force variables such as direction and point of force application with designing an antenna type-modified protraction head gear. A macerated human skull with well aligned upper teeth was used to experimental model and the investigation was done by double exposure holographic interferometry. Fringe patterns of each protraction conditions were compared and analized. The results were as follows. (Frontal view) 1. The Counterclockwise rotation of the maxilla was showed by parallel protraction to occlusal plane and the fringe was decreased in number as higher point of force application. 2. Generally, the number of fringe was increased in 500gm of protraction force than in 300gm. 3. When apply the protraction force to the maxilla with rapid palatal expansion, the direction of fringe patterns was differed from the protraction without expansion. 4. In most of cases, the counterclockwise rotation was decreased in case of the direction of the force is $20^{\circ}$ downward to occlusal plane compared to the parallel direction. 5. At the point of force application is 15mm above and the direction of force is 20 downward to occlusal plane , the translation of the maxillary complex was showed. (Lateral view) 6. The direction of fringe patterns of the facial bones were differed each other by the sutures, and showed almost parallel when apply the 300gm and 500gm of protraction force. 7. In case of rapid palatal expansion with protraction of the maxilla, the fringe patterns between the maxillary area and the area from the posterior of the maxillary first molar to the pterygomaxillary fissure were differed. In case without rapid palatal expansion, the changes of direction and point of the force application did not affect to the direction and the number of the fringe patterns.

• The korean journal of orthodontics
• /
• v.44 no.5
• /
• pp.263-267
• /
• 2014

Objective: To three-dimensionally elucidate the effects of occlusal hypofunction on the periodontal ligament and alveolar bone proper of rat molars by micro-computed tomography (micro-CT). Methods: Occlusal function in the molar area was restricted by attaching an anterior bite plate on the maxillary incisors and a metal cap on the mandibular incisors of 5-week-old male Wistar rats for 1 week. The periodontal ligament space and alveolar bone proper around roots of the mandibular first molar were assessed by histology and micro-CT. Results: The periodontal ligament space was narrower and the alveolar bone proper was sparser and less continuous in the hypofunction group than in the control group. Further, both the volume of the periodontal ligament and the volumetric ratio of the alveolar bone proper to the total tissue in the region of interest were significantly lower in the hypofunction group (p < 0.05). Conclusions: Occlusal hypofunction induces atrophic changes in the periodontal ligament and alveolar bone proper of rat molars.

• Korean Journal of Cleft Lip And Palate
• /
• v.5 no.1
• /
• pp.43-58
• /
• 2002

A General survey on the cleft lip and/or palate patients in Pusan National University Hospital was done. The conclusions were as follow. 1. In gender ratio, male was higher than female. 2. In the cleft type, unilateral cleft lip and palate, cleft lip and alveolus, and bilateral cleft lip and palate in higher ratio order. Left unilateral cleft lip and palate was higher than right in ratio. 3. In first hospital visiting age for dental treatment, the group from 6 years old to 12 years old was most and in that the age group for attending elementary school (about 7-8 years old) showed especially higher ratio. The large majority of patient were born in 1980's and lived in Pusan metropolitan city, KyungSangNamDo. Especially, most of them lived in the neighboring Held of Pusan National University Hospital. 4. Class III skeletal pattern and Angle's Class III molar relationship was most prevalent. Angle's Class II molar relationship showed relative higher ratio because tooth loss and malposition. 5. Primary lip closure in 3 months, secondary lip closure in 6-7 years old, palatal closure in 12-16 months and bone graft in 8-10 years old were operated mostly. Rhinoplasty and scar revision were operated in too early age so the need of infantile orthopedics must be considered. 6. Maxillary expansion and protraction were operated mostly in 8-11 years old but operating in primary dentition must be considered. 7. Tooth alignment were started mostly in mixed dentition and consideration about prosthodontic treatment and retention will be need. 8. In tooth anomaly, tooth malformation and missing were most prevalent.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.2
• /
• pp.182-186
• /
• 2007

A cyst is a pathologic lesion characterized by a cavity filled with fluid, celluar products, air, or a combination of these. Dentigerous cysts were formed around the crown of unerupted teeth. The reduced enamel epithelium persists around the crown after it has formed. Proliferation of the epithelium in a fluid-filled sac may be induced by osmotic pressure. In the first decade the most frequent location is the premolar site. In each subsequent decade the largest number of cysts are in the mandibular third molar site, with the second most frequent site being the maxillary canine. The treatment of odontogenic cyst can be mostly classified into three types of cyst enucleation, marsupialization and decompression. We should consider age of patient, anatomic structure, location and size for choosing a treatment method. Advantage of cyst enucleation is fast healing, but a injury of a surrounding structure is highly. Marsupialization is conservative treatment that can reduce the damage of a adjacent structure, but it is only limited at superficial lesion. Decompression also is conservative treatment, but it has the difficulty of the oral hygiene and the troublesome of the lavage. We present the possibility that reduces the defect of decompression and cures the lesion efficiently. We report a male patient with the dentigerous cyst developed at left mandibular third molar in this study. We used the decompression for a treatment and created special appliance to treat the lesion efficiently. We report a case of the cyst treatment that is association with efficiency of decompression appliance.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.111-120
• /
• 2001

Calcium hydroxide pastes is widely used in conventional endodontics. Along with the expanded clinical use of calcium hydroxide, literatures suggest mixing calcium hydroxide with other substance. Among added substances the vehicle plays the most importance role in the overall process because it is directly related with the velocity of ionic dissociation of $Ca^{2+}$ and OH ion. In this study, we evalutated and compared periapical tissue response and root resorption after canal was filled with mixture of saline and calcium hydroxide(Junsei Chemical Co.. Japan) as a aqueous vehicle, Metapaste(Meta Co., Korea) as a viscous vehicle paste, Vitapex(Neo Dental, Japan) as a oily vehicle paste and IRM(Caulk Dentsply, USA) in replantation of rat molar. A total of 31 maxillary first molars of Sprague-Dawley female rats, 30 days old were used. The upper 1st molar was extracted and the mesiobuccal canal was filled with mixture of saline and calcium hydroxide, Metapaste, Vitapex. IRM and then replanted. Rats were sacrificed 3 weeks after replantation. the maxillae were removed. section of 4 micron were cut and stained with hematoxylin-eosin, Apical tissue response were observed under light microscope. The results were as follows: 1. Saline mixing group and Metapaste group were significant different in fibrous capsule width compared to Vitapex group and IRM group(P<0.05). 2. Saline mixing group. Metapaste group. Vitapex group and IRM group did not prevent root resorption and there were no statistical difference. 3. In saline mixing group and Metapaste group. loss of pastes were observed in all samples. From the results of our study. we observed loss of pastes in saline mixing group and Metapaste group because of water soluble property and assumed it was related to inflammation in apical area and sealing ability of material. So, we should study and develop calcium hydroxide vehicle which is easily removed and more stable and because of only 3 weeks observation we need more evaluation in long period.

• Imaging Science in Dentistry
• /
• v.33 no.1
• /
• pp.5-14
• /
• 2003

Purpose: To observe the histologic pattern of healing in molar tooth extraction sockets of streptozotocin-induced diabetic rats following irradiation. Materials and Methods: Mature Sprague-Dawley rats were divided into three groups: control, diabetic, and diabetic-irradiated groups. Diabetes mellitus was induced by injecting streptozotocin. Control rats were injected with a citrate buffer only. After 5 days, the right maxillary first molar was extracted under general anesthesia from each of the rats. After the extraction, rats in the diabetic-irradiated group were irradiated with a single absorbed dose of 10 Gy to the head and neck region. The rats were killed at 1, 3, 7, 14, 21, and 28 days after treatment. Tissue sections were stained with hematoxylin-eosin and Masson's trichrome. Results: In the diabetic and diabetic-irradiated groups, the early healing process of the socket extraction was similar to the control group, but bone formation was delayed at 7 days after the treatment. In the diabetic-irradiated group, alveolar bone surrounding the extraction socket showed signs of necrosis at 3 days after treatment, and hemorrhage was observed in connective tissue within the extraction socket at 14 days after treatment. Conclusion: This experiment revealed that the healing process of the extraction socket was severely delayed and retarded by irradiation in the diabetic state.

• The korean journal of orthodontics
• /
• v.38 no.3
• /
• pp.175-186
• /
• 2008

Objective: To evaluate the discrepancies between initial STO and final STO in Class III malocclusions and to find which factors are related to the discrepancies. Methods: Twenty patients were selected for the extraction group and 20 patients for the non-extraction group. They were diagnosed as skeletal Class III and received presurgical orthodontic treatment and mandibular set-back surgery at Pusan National University Hospital. The lateral cephalograms were analyzed for initial STO (T1s) at pretreatment and final STO (T2s) after presurgical orthodontic treatment, and specified the landmarks 3s coordinates of the X and V axes. Results: Differences in hard tissue points (T1s-T2s) in the X coordinates of upper central incisor edge, upper first molar mesial end surface, lower central incisor apex, lower first molar mesial end surface and mesio-buccal cusp and Y coordinates of upper central incisor edge, upper central incisor apex, upper first molar mesio-buccal cusp were statistically significant in the extraction group. Differences in hard tissue points (T1s-T2s) in the X coordinates of upper central incisor edge, lower central incisor apex, lower first molar mesial end surface and Y coordinates of lower central incisor apex were statistically significant in the non-extraction group. In the extraction group, the upper arch length discrepancy (UALD) had a statistically significant effect on maxillary incisor and first molar estimation. Lower arch length discrepancy and IMPA had statistically significant effects on mandibular incisor estimation in both groups. Conclusions: Discrepancies between initial STO and final STO and factors contributing to the accuracy of initial STO must be considered in treatment planning of Class III surgical patients to increase the accuracy of prediction.