• 대한구순구개열학회지
• /
• 제12권1호
• /
• pp.21-32
• /
• 2009

Generally, an adult cleft lip or/and palate patient shows some amount of maxillary deficiency due to limitation of bony growth caused by heavy scars resulted from previous operations such as a cheiloplasty and/or a palatoplasty at an early child age. To solve the problem, advancement of the maxilla is usually required during orthognathic surgery. However, severe tensional force resulted from heavy scars on the palate and/or the lip, as well as the bony defect at the cleft area limited sufficient advancement of the maxillary segment and finally caused relapse of the reposed maxilla. Therefore, distraction osteogenesis of the maxilla was introduced for the successful maxillary advancement inthose kinds of patients. As both hard and soft tissues can be simultaneously and gradually extended with this technique, tensional force caused by heavy scars opposed to forward movement of the maxilla can be reduced to an extent not to develop severe relapse of the advanced maxilla. Since distraction osteogenesis of the maxilla was applied as one of standard protocols for the treatment of the patients with severe maxillary hypoplasia dueto cleft lip and/or palate, the devices for the distraction was improved to control the vectors of distraction with better and more stable. We have treated a 23-year-old male cleft patient with a severe maxillary hypoplasia using a newly developed a maxillary distraction device and a RP model for a pre-operative simulation surgery. As a result, we could successfully move the maxilla as we designed pre-operatively and also reduce much of operation time. Therefore, we report of the case to share our experience with colleagues.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권2호
• /
• pp.70-76
• /
• 2017

The purpose of this study was to perform a literature review of short implants in the posterior maxilla and to assess the influence of different factors on implant success rate. A comprehensive search was conducted to retrieve articles published from 2004 to 2015 using short dental implants with lengths less than 10 mm in the posterior maxilla with at least one year of follow-up. Twenty-four of 253 papers were selected, reviewed, and produced the following results. (1) The initial survival rate of short implants in the posterior maxilla was not related to implant width, surface, or design; however, the cumulative success rate of rough-surface short implants was higher than that of machined-surface implants especially in performance of edentulous dental implants of length <7 mm. (2) While bone augmentation can be used for rehabilitation of the atrophic posterior maxilla, short dental implants may be an alternative approach with fewer biological complications. (3) The increased crown-to-implant (C/I) ratio and occlusal table (OT) values in short dental implants with favorable occlusal loading do not seem to cause peri-implant bone loss. Higher C/I ratio does not produce any negative influence on implant success. (4) Some approaches that decrease the stress in posterior short implants use an implant designed to increase bone-implant contact surface area, providing the patient with a mutually protected or canine guidance occlusion and splinting implants together with no cantilever load. The survival rate of short implants in the posterior edentulous maxilla is high, and applying short implants under strict clinical protocols seems to be a safe and predictable technique.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제39권
• /
• pp.2.1-2.6
• /
• 2017

Background: All clinicians are aware of the difficulty of installing a dental implant in posterior maxilla because of proximate position of maxillary sinus, insufficient bone width, and lower bone density. This study is to examine which factors will make the implantation in the posterior maxilla more difficult, and which factors will affect the postoperative implant stability in this region. Methods: Five hundred seventy-three fixtures on the maxilla posterior were included for this study from all the patients who underwent an installation of the dental implant fixture from January 2010 to December 2014 at the Department of Oral and Maxillofacial Surgery in Pusan National University Dental Hospital (Yangsan, Korea). The postoperative implant stability quotient (ISQ) value, fixture diameter and length, presence of either bone graft or sinus lift, and graft material were included in the reviewed factors. The width and height of the bone bed was assessed via preoperative cone beam CT image analysis. The postoperative ISQ value was taken just before loading by using the OsstellTM $mentor^{(R)}$ (Integration Diagnostics AB, Gothenburg, Sweden). The t test and ANOVA methods were used in the statistical analysis of the data. Results: Mean ISQ of all the included data was 79.22. Higher initial bone height, larger fixture diameter, and longer fixture length were factors that influence the implant stability on the posterior edentulous maxilla. On the other hand, the initial bone width, bone graft and sinus elevation procedure, graft material, and approach method for sinus elevation showed no significant impact associated with the implant stability on the posterior edentulous maxilla. Conclusions: It is recommended to install the fixtures accurately in a larger diameter and longer length by performing bone graft and sinus elevation.

• Radiation Oncology Journal
• /
• 제13권3호
• /
• pp.225-231
• /
• 1995

악성 섬유성 조직구종은 상악골부위에서는 매우 드물게 발생하는 악성 종양으로서, 두경부에 발생되는 예가 전체 악성 섬유성 조직구종의 $7{\%}$ 이며 이들 $7{\%}$ 중 $12{\%}$가 상악골에 발생한다고 한다. 상악골의 악성 섬유성 조직구종은 국소재발이나 원격전이가 $55{\%}$의 환자들에서 발생하며 평균 생존기간은 상악골, 하악골 및 구강연부조직의 악성 섬유성 조직구종에 관한 연구에서 30개월로 보고되었다. 상악골의 악성 섬유성 조직구종은 일차적으로 근치적 수술요법이 주 치료방법이다. 방사선치료에 관한 보고들은 대상환자들이 적어서 지금까지 체계적으로 보고되지 않았고, 증례보고에 의한 종양의 퇴행 또는 조직학적 변화가 발표된 바 있으며 일부 저자들은 수술후 방사선치료가 도움이 되지 않으므로 재발성 또는 수술 불가능한 경우에 시행하기를 권하기도 한다. 재발성 또는 전이성 악성 섬유성 조직구종 환자들에서 항암화학요법으로 $33{\%}$의 관해율을 보였다는 보고가 있다. 저자들은 상악골의 악성 섬유성 조직구종 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권1호
• /
• pp.1-11
• /
• 1994

The functional deformity following removal of the maxilla is considerable, especially following maxilla cancer excision. Rehabilitation of oral and maxillofacial region used to be very difficult with prosthesis or traditional flaps. Temporal muscle and fascia flaps have been described for immediate reconstruction following hemi-maxillectomy, but not total maxillectomy. The muscle and superficial fascia of the temporal area differ in their physical characteristics, vascular supply and clinical applications. Both can be employed independently or simultaneously as regional flaps in the reconstruction of a variety of complex craniofacial defects. Four case is presented in which 3 case maxilla cancer, one case non-union after maxilla fracture, and all case showed successful use of this flap. Only one patient developed partial necrosis of the flap ; significant necrosis did not occur in any other patient. This present paper reviews the anatomy, surgical technique and utilisation of temporal muscle and fascia flaps.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권2호
• /
• pp.184-199
• /
• 1996

The challenges to achieve three dimensional facial proportionality and occusal stability in many patients with complex dentofacial deformity have been met by the development and use of the maxilla, mandible, and chin surgery techniques in combination with efficient orthodontic treatment. There is a clinical, biological, and biomechanical foundation for simultaneous surgical repositioning of the maxilla, mandible, and chin in a significant proportion of adult and adolescent patients. A combination of the surgical and orthodontic approach may provide increased treatment efficiencies and optimal esthetic results. Art and science to determine the treatment objectives, specifically, the desired soft tissue changes are firstly established by using the clinician's "esthetic sense" of the facial beauty and proportion aided to a few cephalometric guidelines. In this sense, the dependence on the clinician's "esthetic eye" by Dr. Bell is more important in analyzing the facial proportion than the satisfaction of rigid cephalometric norms. The purpose of this article was to elucidate the indication for simultaneous surgical repositioning of the maxilla, mandible, and chin, and to describe the clinical cephalometric analysis for orthognathic surgery. Representative 6 case reports were presented and discussed to illustrate the esthetic, orthodontic, and surgical treatment objectives with long-term follow-up.

• 한국치위생학회지
• /
• 제20권1호
• /
• pp.11-18
• /
• 2020

Objectives: We analyzed the correlation between physique and size of the dental arch of college students with normal occlusion. Methods: Ninety-nine college students filled out the prepared questionnaire. The length and width of the dental arch of the students was measured using a plaster model after taking an impression. The data were analyzed using the t-test and correlational analysis. Results: The maxilla arch length was 3.70 mm longer and the inter-molar width of the maxilla was 3.06 mm longer in men (both p<0.01) than in women. Additionally, the mandible was 3.66 mm longer in men as compared to those in the women (p<0.01). As height increased, there was increase in the body weight (α=0.683, p<0.01), maxilla arch length (α=0.373, p<0.01), molar width of the maxilla (α=0.214, p<0.05), and the mandible (α=0.280, p<0.01). The greater the weight increase, the greater the maxillary arch length increase (α=0.392, p<0.01), and the greater the molar width of the maxilla (α=0.336, p<0.01) and mandible (α=0.502, p<0.01) increase. Conclusions: As physical size (both height and weight) increased, the maxillary length and molar width also increased. Based on the results of this study, the cause of malocclusion, form and size of the dental arch, and stable occlusion can be used as basic data.

• 대한치과교정학회지
• /
• 제23권1호
• /
• pp.101-113
• /
• 1993

For the purpose of interpretation of positional changes of craniofacial structures in Class III malocclusion between mixed and permanent dentition, 73 normal samples and 103 Class III samples of mixed dentition and 125 normal samples and 168 Class III samples of permanent dentition were selected. Comparative cephalometric analysis was undertaken between them respectively by mesh diagram method to evaluate the positional changes of maxilla and mandible in anteroposterior direction and vertical direction and also the inclination changes of maxillary and mandibular incisors in labio-lingual direction. The following results were obtained : 1. The antero-posterior positional changes of the maxilla and mandible were posterior direction of maxilla and anterior direction of mandible. 2. The vertical positional changes of the maxilla and mandible were superior direction of both maxilla and mandible. 3. The labio-lingual inclination changes of the maxillary and mandibular incisors were lingual direction of both maxillary and mandibular incisors.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.634-638
• /
• 2008

PURPOSE: The application of computer-aided technology to implant dentistry has created new opportunities for treatment planning, surgery and prosthodontic treatment, but the correct selection and combination of available methods may be challenging in times. Hence, the purpose of this case report is to present a combination of several computer-aided tools as approaches to manage complicated implant case. MATERIAL AND METHODS: A 47 year-old female patient with severe dental anxiety, high expectations, financial restrictions and poor compliance presented for a fixed rehabilitation. A CT scan with a radiographic template obtained with software (SimPlant, Materialize, Leuven, Belgium) was used for treatment planning. The surgical plan was created and converted into a stereolithographic model of the maxilla with bone-supported surgical templates (SurgiGuide, Materialise, Leuven, Belgium), that allowed for the precise placement of 7 implants in a severely resorbed edentulous maxilla. After successful osseointegration, an accurate scan model served as the basis for the fabrication of a one-piece milled titanium framework using the Procera (Nobel Biocare, Gothenburg, Sweden) technology. The final rehabilitation of the edentulous maxilla was rendered in the form of a screw-retained maxillary metal-reinforced resin-based complete prosthesis. RESULTS: Despite challenging circumstances, 7 implants could be placed without bone augmentation in a severely resorbed maxilla using the SimPlant software for pre-implant analysis and the SurgiGuide-system as the surgical template. The patient was successfully restored with a fixed full arch restoration, utilizing the Procera system for the fabrication of a milled titanium framework.

• 대한구순구개열학회지
• /
• 제8권1호
• /
• pp.23-29
• /
• 2005

The facial cleft and duplicated maxilla are lire congenital anomaly. After Rushton and Walker had reported a unilateral facial cleft with excess tooth and bone formation in 1937, few authors described similar cases. The etiology of this anomaly is not well understood, but considered embryologically as a neurocristopathy. A neurocristopathy is defined as a condition arising from aberrations in early migration, growth and differentiation of neural crest cells. This aberrations result in facial malformation such as facial clefts and loss or duplication of facial structures. We experienced a male newborn baby with bilateral facial cleft and duplicated maxilla. The cleft was surgically corrected when he was 5 months old. The function and appearance of lip are improved. Duplicated maxilla will be surgically removed. We report this case with review of literatures.