• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.374-381
• /
• 2023

The travel time of flash floods along mountain streams is mainly governed by reach-average velocity, rather than by the point velocity of the locations of interest. Reach-average velocity is influenced by various factors such as stream geometry, streambed materials, and the hydraulic roughness of streams. In this study, the reach-average velocity in mountain streams was measured for storm periods using rhodamine dye tracing. The point cloud data obtained from a LiDAR survey was used to extract the average hydraulic roughness height, such as R_a, R_max, and R_z. The size distribution of the streambed materials (D₅₀, D₈₄) was also considered in the estimation of the roughness height. The field experiments revealed that the reach-average velocities had a significant relationship with flow discharges (v = 0.5499Q^0.6165 ), with an R² value of 0.77. The root mean square error in the roughness height of the R_a-based estimation (0.45) was lower than those of the other estimations (0.47-1.04). Among the parameters for roughness height estimation, the R_a -based roughness height was the most reliable and suitable for developing the reach-average velocity equation for estimating the travel time of flood waves in mountain streams.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.4
• /
• pp.346-354
• /
• 2002

Background : Dyspnea and a limitation in exercise performance are important cause of disability in patients with chronic obstructive pulmonary disease(COPD). A depleted nutritional state is a common problem in patients with a severe degree of chronic airflow limitation. This study was carried out to assess the factors determining the maximum exercise capacity in patients with COPD. Methods : The resting pulmonary function, nutritional status, and maximum exercise performance was assessed in 83 stable patients with moderate to severe COPD. The nutritional status was evaluated by bioelectrical impedance analysis. Maximum exercise performance was evaluated by maximum oxygen uptake($VO_2max$). Results : Among the 83 patients, 59% were characterized by nutritional depletion. In the depleted group, a significantly lower peak expiratory flow rate(p<0.05), Kco(p<0.01) and maximum inspiratory pressure(p<0.05), but a significantly higher airway resistance(p<0.05) was observed. The maximum oxygen uptake and the peak oxygen pulse were lower in the depleted group. The $VO_2max$ correlated with some of the measures of the body composition : fat-free mass(FFM), fat mass(FM), body mass index(BMI), intracellular water index(ICW index), and pulmonary function : forced vital capacity(FVC), forced inspiratory vital capacity(FIVC), diffusion capacity(DLCO) : or maximum respiratory pressure : maximum inspiratory pressure(PImax), maximum expiratory pressure(PEmax). Stepwise regression analysis demonstrated that the FFM, DLCO and FIVC accounted for 68.8% of the variation in the $VO_2max$. Conclusion : The depletion of the FFM is significant factor for predicting the maximum exercise performance in patients with moderate to severe COPD.

• Water for future
• /
• v.15 no.1
• /
• pp.43-56
• /
• 1982

The Purpose of this study deal with some functional realationships in tidal of the Western Coast of Korean Peninsula under equilibrium conditions. The study was carried out by using actual field data meausred at 11 bay observation stations along the Western Coast. The minimum cross section versus the max. tidal prism of mean high water(Ps), the mean tital prism of mean high water(Pm), and the mean tidal prism of mean low water tide (Pn) are correlated. The most dominant results are attained at the A-Ps correlations. Furthermore it is well agreed with O'Briens results for the Pacific Coast of the United Stated. The results derived are as follows. $$A=9.078{\times10^{-4} P_n^{0.865}$$ $$A=3.048{\times10^{-3} P_n^{0.808}$$ $$A=2.30{\times10^{-2} P_n^{0.730}$$ By using those relationships if we know the minimum cross sectional area of the bay, we can easily estimate the tidal prism of the bay.

• Korea-Australia Rheology Journal
• /
• v.16 no.3
• /
• pp.141-146
• /
• 2004

Shear-induced damage of Red Blood Cell (RBC) is an imminent problem to be solved for the practical application of artificial organs in extra corporeal circulation, as it often happens and affects physiological homeostasis of a patient. To design and operate artificial organs in a safe mode, many investigations have been set up to correlate shear and shear-induced cell damage. Most studies were focused on hemolysis i.e. the extreme case, however, it is important as well to obtain a clear understanding of pre-hemolytic mechanical damage. In this study, the change in deformability of RBC was measured by ektacytometry to investigate the damage of RBC caused by shear. To a small magnitude of pre-shear, there is little difference, but to a large magnitude of pre-shear, cell damage occurs and the effect of shear becomes significant depending on both the magnitude and imposed time of shearing. The threshold stress for cell damage was found to be approximately 30 Pa, which is much less than the threshold of mechanical hemolysis but is large enough to occur in vitro as in the extra corporeal circulation during open-heart surgery or artificial heart. In conclusion, it was found and suggested that the decrease of deformability can be used as an early indication of cell damage, in contrast to measuring plasma hemoglobin. As cell damage always occurs during flow in artificial organs, the results as well as the approach adopted here will be helpful in the design and operation of artificial organs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.332-332
• /
• 2010

We have successfully demonstrated the inkjet printing method to create $Al_2O_3$ films withouWe have successfully demonstrated the inkjet printing method to create $Al_2O_3$ films without a high temperature sintering process. In order to remove the coffee ring effect in the ink drop, we have introduced a co-solvent system in order to create Marangoni flow in the ink drop, which leads to the dense packing of ceramic powders on the substrate during inkjet process. The packing density of the Inkjet-printed $Al_2O_3$ films is around 60% (max. 70%) which is very high compared to the value obtained from the same material films by other conventional methods such as film casting, dip coating process, etc. The voids inside the films (which are around 40% of the entire film volume) are filled with the polymer resin (Cyanate ester) by the infiltration process. This resin infiltration is also implemented by the inkjet printing process right after the Ah03 film ink-jetting process. The microstructures of the printed $Al_2O_3$ films are investigated by Scanning Electron Microscope (SEM) to understand the degree of packing density in the printed films. The inkjet-printed $Al_2O_3$ films have been characterized to investigate its thickness and roughness. Quality factor of the printed $Al_2O_3$ film is also measured to be over 300 at 1MHz.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1020-1029
• /
• 2015

This paper investigated the wearing performance of knitted fabrics made of air vortex yarns using PTT/tencel/cotton fibres in comparison with ring and compact yarns for emotional garment. Wicking property of knitted fabric made of MVS yarns was worse than those by ring and compact yarns, however, drying property of knitted fabric made of MVS yarns was better than those by ring and compact yarns, which was explained as more water vapor transport due to larger openness between fibres in the MVS yarns than those in the ring and compact yarns. Thermal conductivity of knitted fabric made of MVS was lower than those of ring and compact yarns and maximum heat flow(Q_max) at the transient state of MVS knitted fabric was lower than those of ring and compact yarns, which may be attributed to MVS yarn structure that has parallel fibres in the core part of the yarn and fasciated fibre bundles on the sheath part with roughness on the yarn surface. However, pilling of MVS knitted fabric was better than those by ring and compact yarns, which was caused by less and shorter hairy fibres protruded from MVS yarn surface than those of ring and compact yarns. It was observed that tactile hand of MVS yarn knitted fabrics was stiffer than those of ring and compact yarns knitted fabrics. It was explained by low extensibility and compressibility and high bending and shear rigidities of the MVS yarn knitted fabrics, which resulted in bad wearing performance of MVS knitted fabric.

• Journal of Advanced Marine Engineering and Technology
• /
• v.14 no.4
• /
• pp.57-66
• /
• 1990

In the design of an electric power plant, the capacity to meet the peak load demand is one of the important factors to be considered. This peak load usually occurs when the most of the cooling air conditioning systems are being operated during daytime in summer season, which inevitably entails the construction of an additional electric power plant. This study is aimed to carry out a basic experiment for the development of a cooling air conditioning system using the ice energy by the surplus electric power during the night-time. The experimental apparatus consists of four major parts; (1) the heating section consisting of the air duct and I.D. fan, (2) the cold section with the ice chamber, (3) the bundle of heat pipes made in a form of the staggered arrangement with ${C_y}/{d_o}$=2.0 and ${C_x}/{d_o}$=1.73, (4) the refrigerator system to cool down the ice chamber. This study involves an intensive experiment concerning the convective heat transfer of the air flow surrounding the bundle of heat pipes. This major experimental parameters are the amount of working fluid, the velocity of air and the working temperature. The major findings of the present study are as follows; (1) The optimum amount of the working fluid necessary for the horizontal heat pipes is much more than that for the vertical type. (2) The convective heat transfer coefficients of the air are coincided with the empirical equations of Grimson and ${\breve{Z}ukauskas}$. (3) The equation of the mean heat transfer coefficient obtained in the present study is ${N_um}=0.32 {Re_max^{0.63}}$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.147-147
• /
• 2011

이상기후 및 극한 홍수 발생빈도의 증가 등으로 인해 많은 수공 구조물이 붕괴 위험에 노출되어 있다. 사전 피해 예방 및 경감을 위해 다양한 수공구조물의 붕괴 현상에 대하여 수리실험적 접근방법을 통한 현상이해 및 예상결과 비교 검증이 필요하다. 그 중에서 제방붕괴에 대한 수리실험은 수치모의를 통한 분석의 어려움 때문에 대부분 모형실험을 통해서 이루어지고 있는 실정이다. 본 연구에서는 실제규모의 제방붕괴 선행실험의 측정결과를 활용하여 실험설계에 이용 하였다. 모형은 실험공간의 규모를 고려하여 축척을 1:10 으로하고, 하도내 흐름 안정을 위해 수로의 길이 는 16, 저폭은 $b\geq10h$를 만족하는 하천으로 설계하여 b를 3m로 설정 하였다. Fr수는 0.29로 원형과 동일하게 하고, 그에 따른 유량 ( )는 0.538m/s로 하였다. 실제 모형 제작에서는 현장 실험실의 펌프용량에 따른 가용유량 ($Q__{max}$)의 제약에 따라 수로가 직선이고 좌우가 대칭인 점을 감안하여 폭을 1/2로 절단 하고 유량은 $0.269m^3/s$(Q/2)를 공급하였다. 위와 같이 모형제작을 위한 실험 설계시 현장 여건을 고려하여 모형을 변형할 경우 EIM(Experimental Information Modeling)을 이용한 수리영향에 대한 분석을 통한 설계검증이 필요하다. FLOW-3D를 이용한 3차원 수치모의를 통하여 동일 지점에서의 유속과 수심을 분석하여 흐름양상을 비교 하였으며, 유속과 수심의 측정위치는 그림 1에 도시하였다. 수치모의 결과 측정지점에서의 수위가 하도 바닥을 기준으로 0.25m로 동일할 경우 수로 단면에 대한 유속 분포가 제방을 기준으로 2b/3까지는 유사한 경향을 보였다. 그 결과, $b\geq10h$인 수로에서 제방붕괴를 위한 모형 설계시 하도 폭을 1/2만 만들 경우에도 실험의 신뢰성이 확보된다는 것을 확인하였다.

• Journal of Korean Society for Quality Management
• /
• v.17 no.1
• /
• pp.69-81
• /
• 1989

This study is concerned with a job sequencing method using the concept of sampling technique in the case of Job Shop. This is the follow study of Kang and Ro (1988) which examined the possibility of application of sampling technique to determine the Job Sequence in the case of Flow Shop. Not only it is very difficult, but also it takes too much time to develop the appropriate job schedules that satisfy the complex work conditions. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions or assumptions. The application areas of these algorithms are also very narrow, so it is very hard to find the appropriate algorithm which satisfy the complex work conditions. In this case it is very desirable to develop a simple job sequencing method which can select the optimal job sequence or near optimal job sequence with a little effort. This study is to examine the effect of sampling job sequencing which can select the good job of 0.01%~5% upper good group. The result shows that there is the sets of 0.05%~23% job sequence group which has the same amount of performance measure with the optimal job sequence in the case of experiment of N/M/G/$F_{max}$. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with consuming a small amount of time. The results of ANOVA show that the only one factor, number of machines is the significant factor for determining the job sequence at ${\alpha}=0.01$. It takes about 10 minutes to compare the number of 10,000 samples of job sequence by personal computer and it is proved that the selection rate of the same job sequence with optimal job sequence is 23.0%, 3.9% and 0.065% in the case of 2 machines, 3 machines and 4 machines, respectively. The area of application can readily be extended to the other work condition.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.251-257
• /
• 2017

Purpose: A chisel mounted on working implement, such as agricultural machinery used in irregular farming conditions, is subjected to highly variable fatigue loading during work. To ensure the safety of the chisel on a working implement for the duration of its service life, fatigue testing must be performed with the proper fatigue test load conditions. In this study, working loads for a chisel were developed by reconstructing loads from strain gage data collected during field tests and used to conduct fatigue tests on the chisel component. Methods: FE analysis with nCode software was utilized to select the proper quantity and locations of strain gages for load measurements. A fatigue test was performed to experimentally verify the fatigue strength of the chisel and to evaluate the validity of the load history developed with the load reconstruction technique. Results: A strain history for the chisel was obtained from data collected during field tests. The data was filtered for the 14-16 km/h speed range, connected, and merged. The chisel load history was developed using the load reconstruction technique. The resulting load history was expressed as a load spectrum using the rain-flow counting method. Conclusions: A fatigue test was conducted on a chisel under a constant load condition with an equivalent load amplitude and number of cycles, as calculated by Miner's Rule for linear damage accumulation. During the fatigue test, there were no cracks at any position. It is concluded that the fatigue test method proposed in this study can be utilized successfully as a durability evaluation method for the chisel.