• Water for future
• /
• v.24 no.1
• /
• pp.119-128
• /
• 1991

This study was focused on establishing the concepts of the instream flow to prevent the problems for the conceptual ambiguity and the difference in the instream flow estimation methods. The average drought flow is defined as the flow required to guarantee the minimum function of the river such as prevention of drying. The environmental control flow is defined as the flow required to control optimal river environment, the flow required for navigation, prevention of sea water-intrusion, protection of river management facilities, conservation of water Quality, fishing, prevention of river mouth closure, control of groundwater level, protection of animals and plants, and landscape. The average drought flow was obtained by flow duration analysis for the natural flows in the Han River at Indo-Bridge gaging station. When considering the 9 factors related to environment conservation, the conservation of water quality was proved to be most important. The pollutants for the river flows were estimated and the water qualities were forecasted. After comparing the water qualities in the future and water quality standards, there quired optimal dilution flow was estimated. The average drought flow and environmental control flow are all non-consumptive flows. Therefore larger flow between them, i.e., Max. (average drought flow, environmental control flow) can be the instream flow. The river management flow can be added to the flows for water utilization in the downstream. The results from this study are expected to be very helpful in the systematic river management on the other main rivers in Korea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3B
• /
• pp.183-198
• /
• 2006

We define the incomplete medium sharing system as a multi-channel shared medium communication system where constraints are imposed to the set of channels that may be allocated to some transmitter-receiver node pairs. To derive a centralized MAC scheme of a incomplete medium sharing system, we address the problem of optimal channel allocation The optimal channel allocation problem is then translated into a max-flow problem in a multi-commodity flow graph, and it is shown that the optimal solution can then be obtained by solving a linear programming problem. In addition, two suboptimal channel allocation schemes are proposed to bring down the computational complexity to a practical/feasible level; (1) one is a modified iSLIP channel allocation scheme, (2) the other is sequential channel allocation scheme. From the results of a extensive set of numerical experiments, it is found that the suboptimal schemes evaluate channel utilization close to that of the optimal schemes while requiring much less amount of computation than the optimal scheme. In particular, the sequential channel allocation scheme is shown to achieve higher channel utilization with less computational complexity than . the modified iSLIP channel allocation scheme.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.115-123
• /
• 2012

Material flow control mechanism is a kind of operational policy in manufacturing. It is very important because it varies throughput, throughput time, and work-in-process (WIP) under the same manufacturing resources. Many Researchers have developed various material flow control mechanisms and insisted that their mechanism is superior to others. However the experimental environment used in the performance comparison are different and impractical. In this paper, we set various manufacturing environments to fairly compare five previous material flow control mechanism : Push, Pull, CONWIP, Gated MaxWIP, and Critical WIP Loops. The simulation results show that the Push is superior to others in both of throughput and WIP if required demand is less than 80% of capacity. In addition, the performance of CONWIP and its variants are not different statistically.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.5
• /
• pp.309-315
• /
• 2011

A sensitive and specific liquid chromatographic method coupled with tandem mass spectrometry (LC-MS/MS) was developed for the analysis of ambroxol (active moiety of acebrophylline). After acetonitrile precipitation of proteins from plasma samples, ambroxol and the domperidone (internal standard, IS) were eluted on a C18 column. The isocratic mobile phase was consisted of 10 mM ammonium acetate and methanol (10 : 90, v/v), with flow rate at 0.2 mL/min. A tandem mass spectrometer, as detector, was used for quantitative analysis in positive mode by a multiple reaction monitoring mode to monitor the m/z 379.2${\rightarrow}$264.0 and the m/z 426.2${\rightarrow}$175.1 transitions for ambroxol and the IS, respectively. Twenty four healthy Korean male subjects received two capsules (100 mg ${\times}$ 2) of either the test or the reference formulation of acebrophylline HCl in a 2 ${\times}$ 2 crossover study, this was followed by a 1week washout period between either formulation. $AUC_{0-t}$ (the area under the plasma concentration-time curve) was calculated by the linear trapezoidal rule. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. The 90% confidence intervals for the log transformed data were acceptable range of log 0.8 to log 1.25 (e.g., log 0.8964 - log 0.9910 for $AUC_{0-t}$ log 0.8690 - log 1.0750 for $C_{max}$). The major parameters, $AUC_{0-t}$ and $C_{max}$ met the criteria of Korea Food and Drug Administration for bioequivalence indicating that Acephyll$^{(R)}$ capsule (test) is bioequivalent to Surfolase$^{(R)}$ capsule (reference).

• Journal of Environmental Science International
• /
• v.24 no.11
• /
• pp.1393-1404
• /
• 2015

Ten empirical disinfection models for the plasma process were used to find an optimum model. The variation of model parameters in each model according to the operating conditions (first voltage, second voltage, air flow rate, pH, incubation water concentration) were investigated in order to explain the disinfection model. In this experiment, the DBD (dielectric barrier discharge) plasma reactor was used to inactivate Phytophthora capsici which cause wilt in tomato plantation. Optimum disinfection models were chosen among ten models by the application of statistical SSE (sum of squared error), RMSE (root mean sum of squared error), $r^2$ values on the experimental data using the GInaFiT software in Microsoft Excel. The optimum models were shown as Log-linear+Tail model, Double Weibull model and Biphasic model. Three models were applied to the experimental data according to the variation of the operating conditions. In Log-linear+Tail model, $Log_{10}(N_o)$, $Log_{10}(N_{res})$ and $k_{max}$ values were examined. In Double Weibull model, $Log_{10}(N_o)$, $Log_{10}(N_{res})$, ${\alpha}$, ${\delta}_1$, ${\delta}_2$, p values were calculated and examined. In Biphasic model, $Log_{10}(N_o)$, f, $k_{max1}$ and $k_{max2}$ values were used. The appropriate model parameters for the calculation of optimum operating conditions were $k_{max}$, ${\alpha}$, $k_{max1}$ at each model, respectively.

• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.7-12
• /
• 1975

The sap uses of Korean sugar maple, Acer mono Max., "Gorosoe-namoo," the most abundant growing stock in maples, for a medical beverage at every early spring have had the long history in Korea. The sap of Korean sugar maple (the maple) was prepared with a unique tapping method from the trees during the sap flow season of 1974, measured the sugar content in $2.6^{\circ}$ to $3.3^{\circ}Brix$ of sugar on average and the sugar concentration of the sap was enough for a sweetener resource comparing with those of American sugar maples in literature. The color of sirup was very dark and the color index was 2.69 for the sirup of $15.3^{\circ}Brix$ having 10 hours evaporation and 3.380 for the standard sirup, as shown in Table 3 and Figure 2, due to the prolonged evaporation in deep aluminium or stainless steel kettles. The alcohol extractives of standard sirup has the light color and the residue reddish brown and the absorption spectra have the maxima in wave length of 350 nm, 1,000 nm, 1,170 nm, 1,400 nm and 1900 nm, as shown in Figure 3. The extractives of ethanol and monoethanolamine mixture (97:3, v/v) has dark red and the residue darker redish brown.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.11 no.1
• /
• pp.300-318
• /
• 1998

Background : The vasoreactivity of cerebral artery is currently the subject of increasing interest. Transcranial Doppler Sonography(TCD) is an accurate method of monitoring the blood flow velocities of the cerebral artery. We wished to assess the vasoreactivity between age-matched normal and cerebral infarction group. Method : We performed TCD findings in 40 normals and 20 cb-inf. subjects who arrived at hospital during 48 hours after attack. The former were devided into twenties normal group and fifties normal group. Result : 1. Fibrinogen levels showed significant changes between age-matched normal and cb-inf. group. 2. $V^{MEAN}$ of the both side Carotid Siphon during rest state increased significantly in cb-inf. group as compared with the age-matched normal group. 3. $V^{MEAN}and\;V^{MAX}$ of the both side carotid siphon during breath-hold state increased significantly in cb-inf. group as compared with the age-matched normal group. 4. Vasoreactivity of cerebral artery increased significantly in cb-inf. group as compared with the age-matched normal group. 5. $V^{MEAN}and\;V^{MAX}$ of the both side Radial artery during heat-stimuration state increased significantly in cb-inf. group as compared with the age-matched normal group. 6. Vasoreactivity of Radial artery increased significantly in cb-inf. group as compared with the age-matched normal group.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.734-738
• /
• 2010

현재 우리나라는 이상기후 현상이 발생하여 계획홍수위를 초과하는 극한홍수에 의한 피해가 심각해지고 있는 실정이다. 또한 도심지역에서 제방이 붕괴된다면 범람홍수파에 의해 적지 않은 인명 및 재산피해가 발생할 수 있다. 이와 같은 피해를 줄이려면 제방붕괴시 범람홍수파의 수리학적 거동특성을 명확히 규명하고 이에 따른 대피체계가 수립되어야한다. 이에 본 연구는 기존의 3차원 수치모형인 FLOW-3D를 통한 범람홍수파 특성연구에 조도계수 및 GMO(General Moving Object)를 추가하여 점진적인 제방붕괴로 인한 제내지에서 범람홍수파의 수리학적 거통 특성을 모의하였다. 높이 0.6m의 제방붕괴 단면이 시간에 따라 일정하게 넓어지면서 제내지로 홍수파가 유입되어 들어오도록 모의하였다. 수치모의 된 결과를 선행연구의 수리실험결과와 비교 검증을 수행하였다. 또한 수치모형 값에 조도계수를 입력하여 기존연구와 비교분석하였다. GMO를 이용하여 붕괴속도($v_0$)에 변화를 준 경우, 유속($v_{max}$) 및 수위($h_{max}$)변화에 큰 차이를 보이지 않았고, 초기 월류수심($h_0$) 변화에 따른 범람홍수파의 영향을 분석한 결과 붕괴속도 보다 큰 영향을 미치는 것으로 분석되었다. 본 연구결과의 활용방안으로 제방붕괴시 홍수범람에 의한 비상대처계획(EAP) 수립에 기초자료로 활용될 수 있을 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.4
• /
• pp.335-340
• /
• 2007

A new correlation between the Nusselt number based on modified heat transfer coefficient and Reynold number based on droplet-flow-rate was developed for the experimental data. The modified heat transfer coefficient was defined as ratio of wall heat flux to droplet subcooling. In the previous reports, the local heat flux of spray cooling in the film boiling region was experimentally investigated for the water spray region of $D_{max} = 0.0007{\sim}0.03m^3/(m^2s)$ . In the region near the stagnation point of spray flow, a new heat transfer correlation is recommended which shows good predictions for the water spray region of $D_x{\le}0.01m^3/(m^2s)$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1157-1166
• /
• 2008

Critical surcharge value of silt ground polluted with garbage leachate to the dyes $q_{cr}=3.73c_u$ and ultimate bearing capacity value $q_{ult}=8.60c_u$. Lateral flow pressure at polluted silt ground was about $P_{max}$/3 and depth of maximum lateral flow pressure was found at that of H/3 of soft layer thickness(H). Expression of polluted silt ground of fracture baseline at stability control charge by Matsuo Kawamura is $S_v=3.56\exp\{0.51(Y_m/S_v)\}$.