• Title/Summary/Keyword: Max Communication Range

Search Result 22, Processing Time 0.036 seconds

Analysis of Parameters Effecting MOBILE WiMAX Connectivity (모바일 WiMAX의 연결성 매개변수 효율 분석)

  • Chowdhury, Olly Roy;Kaiser, Arif;Kabir, Ekramul;Aditya, Subrata Kumar;Park, Jang-Woo
    • Journal of Advanced Navigation Technology
    • /
    • v.18 no.1
    • /
    • pp.84-89
    • /
    • 2014
  • Worldwide Interoperability for Microwave Access (WiMAX) is an efficient technology for 20th century communication system. The technology provides broadband speed without the need for cables and is based on the IEEE 802.16 standard(also called Wireless MAN). Mobile WiMAX is defined as IEEE802.16e which is advanced and efficient technology for mobile telecommunication rather than GSM, CDMA technology. In this work link budget calculation for WiMAX have been done. Cell range have been calculated over digital modulations and they are BPSK, QPSK and QAM. Here different types of models like Cost 231 model have been used for different types of areas like open, rural and urban areas and Erceg-Greenstein model for sub-urban areas. Effect of various parameters like frequency, base station antenna height, transmission power and SNR over cell range have been studied. Analysis have done for both uplink and downlink.

A Distribution Key Management Protocol for improving Security of Inner Attack in WiMAX Environment (WiMAX 환경에서 내부 공격의 안전성을 향상시킨 분산 키 관리 프로토콜)

  • Jeong, Yoon-Su;Kim, Yong-Tae;Park, Gil-Cheol
    • Journal of the Korea Society of Computer and Information
    • /
    • v.14 no.1
    • /
    • pp.107-115
    • /
    • 2009
  • The cryptological key which is used in WiMAX environment is used at regular intervals by mobile nodes (laptop computer, PDA, cell-phone) which is in the range of base station coverage. But it is very weak at local attack like man-in-the-middle when the mobile node is off the range of base station or enters into the range to communicate with base station because the communication section is activated wirelessly. This paper proposes a distribution key building protocol which can reuse security key used by nodes to reduce cryptological security attack danger and communication overhead which occurs when mobile node tries to communicate with base station. The proposed distribution key establishing protocol can reduce overhead which occurs between base station and mobile node through key reusing which occurs during the communication process and also, makes security better than IEEE 802.16 standard by creating shared key which is required for inter-certification through the random number which node itself creates.

Performance Comparison between WiMAX and WLAN and Construction of Tactical/Strategic Communication Network Using OPNET

  • Je, Seung-Mo;Han, Sang-Hoon;Huh, Jun-Ho
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2017.04a
    • /
    • pp.97-100
    • /
    • 2017
  • As part of overseas defense program of the US's Trump administration, the military allies were asked to cover partial operation costs for the weaponry deployed at the US bases in their countries. This raised the Korean government's, as well as defense industry's interest in constructing a tactical/strategic communication network and investments are being made actively. Thus, in this study, the performances of WiMAX and WLAN have been compared and a tactical/strategic communication network has been constructed for simulation by using OPNET. As a result, the simulation for the network using combat tanks was successful. An average communication distance that can be achieved by WLAN in open terrain is about 200m as it has been designed on the premise of short-range wireless communications. When the distance was increased to 1km, the tanks could not receive data. By contrast, it was able to confirm that the WiMAX-based network has allowed smooth communications at the same distance. Based on this result, it can be concluded that using WiMAX for tactical operations will have much more merit than adopting WLAN as far as the distance is concerned.

Synthesis and Properties of Blue Emitting Polymers Containing Carbazole Groups

  • Kwon, Young-Hwan;Wang, Hui;Kim, Yeon-Bo;Ryu, Jeong-Tak;Chang, Seung-Hyun
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.07a
    • /
    • pp.473-474
    • /
    • 2005
  • Blue-emitting polymers containing carbazole units In main chains were synthesized by palladium catalyzed polycondensation of aniline with dibromo-substituted monomers such as 3,6-dibromocarbazole, N-(2-ethylhexyl)-3,6-dibromocarbazole, and bis[6-bromo-N-(2-ethylhexyl)-carbazole-3-yl], respectively. All synthesized polymers exhibited relatively good solubility in common organic solvents, considerable molecular weights and high resistance to thermal degradation. From UV-Vis absorption and photoluminescence (PL) spectra of these solution-processable polymers, $\lambda_{max,UV}$ were in the range of 290 ~ 340 nm and $\lambda_{max,PL}$ were in the blue emission range of 440 ~ 478 nm, The polymers had HOMO energy (-5.19 ~ -5.64 eV) and wide band gap energy (2,91 - 3.42 eV).

  • PDF

Efficient Computing Method for Location-Based Density of Mobile Node (효과적인 위치 기반 이동 노드 밀집도 계산방법)

  • Kim, In-bum;Seo, Choon-weon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.11
    • /
    • pp.2196-2204
    • /
    • 2015
  • Location-based density information of mobile node could be used well in various, new and expanding areas such as location-based services, internet of things, smart grid technologies, and intelligent building. In general, receiving mobile nodes of a wireless mobile node depend on the maximum communication range of transmitting mobile node. In this paper, efficient computing method for mobile node using Delaunay triangulation is proposed, which is irrespective of mobile node's maximum communication range and reflect relative location in a given situation. Proposed method may be good used to find out the density of network constructed by various max communication range devices as Internet of Things. This method suggested in this paper could work well for location-based services, internet of things, smart grid technologies, and intelligent building.

The Evaluation of UWB Wireless Communication Position Determination Function in an Enclosed Space for Fire Fighting (소방활동을 위한 밀폐공간 무선통신 측위성능 평가)

  • Kim, Dong-Hyun;Kim, Chung-Il
    • Fire Science and Engineering
    • /
    • v.31 no.5
    • /
    • pp.117-122
    • /
    • 2017
  • The absence of fire fighters' connection to communication can bring about increased loss of life due to errors and delays in rescue and actions and danger to their own safety. Therefore, when communication infrastructure has been destroyed in an enclosed space, it is necessary to set up an emergency wire or wireless telecommunication environment to fire fighting and to secure safer environment to deal with the disaster by checking the location of fire fighters. In this research, for the establishment communication environment in an enclosed inside using Ultra-Wide Band (UWB) wireless communication network, the performance of communication position determination of a single UWB communication module was evaluated regarding 6 kinds of indoor surroundings. When the communication distance in an indoor environment of each 6 channels bandwidth of UWB communication frequency was measured, the results were as follows: the open space (Ave. 15.5 m, Max. 20 m), the corridor (Ave. 17.33 m, Max 20 m), inside retaining home furnishings (Ave. 15.3 m, Max. 20 m), vertical stairs (Ave. 4.33 m, Max. 6 m), horizontal space with a closed fire door (Ave. 6.5 m, Max. 17 m). It was also found out that the communication function and the distance function were best in the frequency range from 6489.6 to 1081.6 MHz by 7 Ch. Accordingly, the establishment of communication environment in an enclosed space is judged to be possible when UWB communication module is set up at 20 m apart and multiple channels are used.

Fabrication of NTC thermistor embedded Miniature Thermoelectric Cooling Module for Temperature Control (NTC 써미스터가 내장된 항온 제어용 소형 열전 냉각 모듈 제조)

  • Park J. W.;Choi J. C.;Hwang C. W.;Choi S. C.
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.11 no.3 s.32
    • /
    • pp.83-89
    • /
    • 2004
  • NTC thermistor embedded miniature thermoelectric module was fabricated for the precise temperature control of optical communication device such as laser diode (LD). The miniature thermoelectric module ($7.2 mm{\times}9 mm{\times}2.2 mm$) consists of 21 BiTe thermoelectric couples, the operating temperature is precisely controlled by embedded thermistor with quick response. The figure-of-merit (Z), maximum temperature difference (${\Delta}T_{max}$), maximum cooling capacity ($Q_{max}$) of the miniature thermoelectric module were $2.5{\times}10^{-3}$/K, 72 K, 2.2 W respectively and temperature could be controlled in range of ${\pm}0.1^{\circ}C$ accuracy in air. The fabricated miniature thermoelectric module is suitable for applications of the optical communication packaging.

  • PDF

Dynamic Economic Load Dispatch Problem Applying Valve-Point Balance and Swap Optimization Method (밸브지점 균형과 교환 최적화 방법을 적용한 동적경제급전문제)

  • Lee, Sang-Un
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.16 no.1
    • /
    • pp.253-262
    • /
    • 2016
  • This paper proposes a balance-swap method for the dynamic economic load dispatch problem. Based on the premise that all generators shall be operated at valve-points, the proposed algorithm initially sets the maximum generation power at $P_i{\leftarrow}P_i^{max}$. As for generator i with $_{max}c_i$, which is the maximum operating cost $c_i=\frac{F(P_i)-F(P_{iv_k})}{(P_i-P_{iv_k})}$ produced when the generation power of each generator is reduced to the valve-point $v_k$, the algorithm reduces i's generation power down to $P_{iv_k}$, the valve-point operating cost. When ${\Sigma}P_i-P_d$ > 0, it reduces the generation power of a generator with $_{max}c_i$ of $c_i=F(P_i)-F(P_i-1)$ to $P_i{\leftarrow}P_i-1$ so as to restore the equilibrium ${\Sigma}P_i=P_d$. The algorithm subsequently optimizes by employing an adult-step method in which power in the range of $_{min}\{_{max}(P_i-P_i^{min}),\;_{max}(P_i^{max}-P_i)\}$>${\alpha}{\geq}10$ is reduced by 10; a baby step method in which power in the range of 10>${\alpha}{\geq}1$ is reduced by 1; and a swap method for $_{max}[F(P_i)-F(P_i-{\alpha})]$>$_{min}[F(P_j+{\alpha})-F(P_j)]$, $i{\neq}j$ of $P_i=P_i{\pm}{\alpha}$, in which power is swapped to $P_i=P_i-{\alpha}$, $P_j=P_j+{\alpha}$. It finally executes minute swap process for ${\alpha}=\text{0.1, 0.01, 0.001, 0.0001}$. When applied to various experimental cases of the dynamic economic load dispatch problems, the proposed algorithm has proved to maximize economic benefits by significantly reducing the optimal operating cost of the extant Heuristic algorithm.

Efficient Construction of Emergency Network Using Delaunay Triangulation (들로네 삼각망을 활용한 효과적인 긴급 연락망 구성)

  • Kim, Chae-Kak;Kim, In-Bum;Kim, Soo-In
    • Journal of the Korea Society of Computer and Information
    • /
    • v.19 no.11
    • /
    • pp.81-90
    • /
    • 2014
  • For necessary information sharing or operation control via wire-wireless/mobile network connecting of devices at disaster area in greatest need of attention, an emergency network efficient construction method quickly connecting nodes within specific range using Delaunay triangulation is proposed. The emergency network constructed by proposed method shows the same aggregate network length, but does more excellent performance in term of network construction time the more long max length connectable to adjacent node as compared with the network by naive method. In experiment of 1000 input terminal nodes, 5 max length connectable to adjacent node, our proposed method enhances 89.1% in execution time without network length increase compared to naive method. So our method can go well to many useful applications as shift construction of communication network of adjacent devices, internet of things and efficient routing in the sensor network in continuous improvement of communication capability.

Voice therapy for pitch problems following thyroidectomy without laryngeal nerve injury (신경학적 손상이 없는 갑상선 술 후 음도문제의 음성치료)

  • Ji-sung Kim;Mi-jin Kim
    • Phonetics and Speech Sciences
    • /
    • v.15 no.3
    • /
    • pp.53-58
    • /
    • 2023
  • After thyroidectomy, some patients who show normal vocal cord movement still complain of subjective voice problems, which could lead to a decrease in quality of life related to communication. This study aims to investigate the effectiveness of a newly designed voice therapy applying neck exercise and semi-occluded vocal tract exercise (SOVTE) to improve voice problems after thyroidectomy without neurological injury. For this purpose, voice therapy was randomly assigned to 10 women who received thyroidectomy. Acoustic analysis [fundamental frequency, jitter, shimmer, noise-to-harmonics ratio, min Voice Range Profile (VRP), max VRP, VRP] was performed before and after surgery and immediately after voice therapy to compare voice changes. The study showed a statistically significant increase in max VRP and VRP after voice therapy compared to before surgery. These results suggest that the voice therapy methods in this study effectively improve a major symptom of voice problems after thyroidectomy, specifically the reduction in the high-frequency range. However, this study was limited in the number of s participants and did not control for the type of surgery. Therefore, further research utilizing larger sample sizes and controlled variables is needed to investigate the long-term effects of voice therapy.