• Journal of the Korea Safety Management & Science
• /
• v.23 no.3
• /
• pp.97-102
• /
• 2021

This study developed a scenario to understand the reaction rate and operational time according to RTI value of rate of rise detector in each type in case of fire mattress. In the results of analyzing the reaction rate and operational time of detector in each scenario, in case when installing a single detector, the elevated temperature per minute was raised to 8℃/min ~ 9℃/min. In case when installing two detectors, it was raised to 9℃/min ~ 10℃/min. In case when installing three detectors, it was raised to 10℃/min. The horizontal distance between detector and mattress was 1.8m~2.5m. Whenever the number of detectors was increased, the horizontal distance was decreased. The operational time of detector was within maximum 540 seconds and minimum 420 seconds. As the research tasks in the future, there should be the researches on the effects of reaction rate of detector on the evacuation in case of fire through the result value of RSET by setting up the latency until the detector operates, and the researches on the safety by understanding if the operational time of detector is suitable for the evaluation standard of performance-centered design.

• Journal of Biomedical Engineering Research
• /
• v.31 no.6
• /
• pp.438-448
• /
• 2010

The social activities of the elderly have been increasing as our society progresses toward an aging society. As their activities are increased, the occurrence of falls that could lead to fractures are increased. Falls are serious health hazards to the elderly and we need more thorough understanding of falls including the progress of falls and the impact area in various fall directions. Many of the traditional methods of falls research dealt with voluntary falls by younger subject since older subject can easily get fracture from voluntary falls. So, it has been difficult to get exact data about falls of the elderly. Here, we tried to capture the characteristics of the movements of major joints using three dimensional motion capture system during falls experiments using a moving mattress that can safely induce unexpected falls. Healthy younger subjects participated in the actual falls experiment and the moving mattress was actuated by a pneumatic system. The kinematic parameters such as velocities of major segments were imported to a computer simulation environment and falls to hard surfaces were simulated in a computational environment using a realistic human model of aged persons. The simulation was able to give approximations to contact forces which can occur during actual falls. And we designed impact absorption system to reduce the impact during falls. We can adapt this system to fracture prevention system that we are going to study.

• Journal of Biomedical Engineering Research
• /
• v.35 no.4
• /
• pp.87-94
• /
• 2014

Recent technological advances have increased interest in personal health monitoring. Electrocardiogram(ECG) monitoring is a basic healthcare activity and can provide decisive information regarding cardiovascular system status. In this study, we developed a capacitive ECG measurement system that can be included within a cloth mattress pad. The device permits ECG data to be obtained during sleep by using capacitive electrodes. However, it is difficult to detect R-wave peaks automatically because signals obtained from the system can include a high level of noise from various sources. Because R-peak detection is important in ECG applications, we developed an algorithm that can reduce noise and improve detection accuracy under noisy conditions. Algorithm reliability was evaluated by determining its sensitivity(Se), positive predictivity(+P), and error rate(Er) by using data from the MIT-BIH Polysomnographic Database and from our capacitive ECG system. The results showed that Se = 99.75%, +P = 99.77%, and Er = 0.47% for MIT-BIH Polysomnographic Database while Se = 96.47%, +P = 99.32%, and Er = 4.34% for our capacitive ECG system. Based on those results, we conclude that our R-peak detection method is capable of providing useful ECG information, even under noisy signal conditions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1393-1397
• /
• 2005

홍수유출을 저감시키기 위해서 유역의 저류기능을 강화시킬 수 있는 댐 건설은 이수적인 측면에서 안정적인 용수공급을 보장해주는 수단으로 겸용되어 왔으며, 특히 다목적댐이 건설되면서 하도의 첨두홍수유출량을 줄이는데 크게 기여해 왔다. 하지만 그로 인해 물의 흐름이 막히는 정체수역이 증가하고 있으며, 생활오수, 산업폐수의 발생은 정체수역에서의 영양염류 부하량을 증가시켜 부영양화를 초래하고 있다. 수생식물은 태양빛을 받아 광합성 작용을 하여 수중에서 성장하면서 수중의 유$\cdot$무기물질을 영양소로 섭취함으로써 수질을 정화시키는 작용을 하게 된다. 영양염류 부하량이 큰 정체수역의 오염된 물은 식물의 성장활동에 의해서 어느 정도 정화시킬 수 있으며, 이와 같이 수중에 식물을 식재하기 위해서는 식물이 하상에 쉽게 그리고 지속적으로 성장하고 번식활동을 할 수 있는 여건이 필요하다. 따라서 본 연구에서는 Mattress/Filter를 정체수역에 설치함으로써 이러한 식물의 성장과 번식을 도와줄 수 있는 환경조건을 제안하였다. 연구결과, Mattress에 식재한 갈대, 줄 및 애기부들의 피도는 $60-80\%$ 정도로 나타났다. 각 Mattress의 식물군집에는 초기 식재한 식물의 우점도가 가장 높았으나 갈대와 줄 군락의 경우 다른 종이 많이 출현하는 것으로 나타났다. 갈대 군락에서는 갈대가 크게 우점하였으나 그 외에 돌피, 하늘지기, 여뀌바늘 등이 우점하는 것으로 나타났다. 또한 줄 군락에서는 역시 줄이 크게 우점하였으나 방동사니, 돌피, 조개풀 등이 출현하였다. 애기부들 군락에서는 애기부들외에 세모고랭이와 미국가막사리 두가지 종만 출현한 것으로 나타났다. 갈대와 줄 군락의 출현 종수는 각각 7과 11이었으며, 다양도지수가 1.67, 2.18로 식물다양성이 크게 증가한 것으로 나타났다. 수질은 BOD 10mg/L, TN 15mg/L, TP 2.0mg/L이하로 이를 유등천 상류부에 공급할 경우 유등천의 수질은 BOD 6.7mg/L, TN 9.80mg/L, TP 0.90mg/L를 나타낼 것으로 예측된다. 고도처리시설의 도입 후 금강 합류점에서 갑천의 예측 BOD는 7.4mg/L로 현재 9.0mg/L에 비하여 개선되지만 이는 금강수계 오염총량 관리계획의 시$\cdot$도 경계지점 목표수질인 5.9mg/L를 만족시키지 못하므로, 이를 만족시키기 위해서는 방류수 BOD 7.2mg/L이하로 처리해야 할 것으로 판단된다.which support only concepts or image features.방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.38-41
• /
• 2012

This study aims to analyze fourteen cases' HRR & SPR results on bed mattress's reaction-to-fire test in real scale where open flame burner system is used with total heat supply of 27 kW. Most cases show all burning within 5 minutes from the beginning of the test and 3 cases of them reach flashover situation.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.811-816
• /
• 2007

The social activities of the elderly have been increasing as our society progresses toward an aging society. As their activities are increased, the occurrence of falls that could lead to fractures are increased. Falls are serious health hazards to the elderly and we need more thorough understanding of falls including the progress of falls and the impact area in various fall directions. Many of the traditional methods of falls research dealt with voluntary falls by younger subject since older subject can easily get fracture from voluntary falls. So, it has been difficult to get exact data about falls of the elderly. Here, we tried to capture the characteristics of the movements of major joints using three dimensional motion capture system during falls experiments using a moving mattress that can safely induce unexpected falls. Healthy younger subjects participated in the actual falls experiment and the moving mattress was actuated by a pneumatic system. The kinematic parameters such as velocities and accelerations of major segments were imported to a computer simulation environment and falls to hard surfaces were simulated in a computational environment using a realistic human model of aged persons. The simulation was able to give approximations to contact forces which can occur during actual falls.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1535-1538
• /
• 2004

In this paper, an Intelligent Bed Robot System (IBRS) is proposed, that is a special bed equipped with robot manipulator. To assist a patient using IBRS, pose and motion estimation process is fundamental. It is designed to help the elderly and the disabled for their independent life in bed without other assistants. For this purpose, we use the pressure sensor distributed mattress for detecting the change of motion on the bed. Using that data, we control the robot arm to move to the appropriate position and serve to the user. In addition, we can estimate the user's intention based on the change of pressure and use those data to control the robot arm guide.

• Journal of Information Technology Services
• /
• v.11 no.sup
• /
• pp.113-121
• /
• 2012

In this study, a real-time fall detection system based on a smartphone equipped with three-axis accelerometer and magnetometer was proposed and evaluated. The proposed system provides a service that detects falls in real time, triggers alarm sound, and sends emergency SMS(Short Message Service) if the alarm is not deactivated within a predefined time. When both of the acceleration magnitude and angle displacement of the smartphone attached to waist belt are greater than predefined thresholds, it is detected as a fall. The proposed system was evaluated against activities of daily living(walking, jogging, sitting down, standing up, ascending stairs, and descending stairs) and unintended falls induced by a proprietary pneumatic-powered mattress. With the thresholds of acceleration magnitude 1.7g and angle displacement $80^{\circ}$, it showed 96.5% accuracy to detect the falls while all the activities of daily living were not detected as fall.

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.05
• /
• pp.86-88
• /
• 1991

A micro-computer based system has been designed to evaluate the performance of infant incubators. The measurement system used a hybrid of analog electronics for amplification, integration and switches and micro-computer for data storage, data display, and control of relay. This approach has been applied to measure the warm-up time, temperature stability, temperature change due to open/close of door and portholes, and temperature distribution on the mattress. The micro-computer provides on-line access of multi-point temperature data.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.10a
• /
• pp.33-42
• /
• 1993

Geocell is a three dimensional cellular confinement system that forms a reocomposite mattress with infill material to increase the bearing capacity dramatically rather than geotextiles of nonwoven and woven fabric type and geogrid. In terms of design, this geocell confinement is quite complex to assess and is different in its hieoretical evaluation and its concept from other geosynthetic products. Thsi study is aimed to help a basic understanding on Geoweb system, which is known to be the most effective and easiest in handling among the geocell systems ever developed, by introducing two method of interpretation for the improvement of bearing capacity. Thus the writers are sillingly to help the geotechnical engineers and the site engineers who might be encountered with the bearing capacity problems on site.